Rocaris 100 Pack Abrasive Wheels, 1" (25mm) Abrasive Buffing Polishing Wheels Burr for Rotary Tools-1/8(3mm) Shank

I love the versatility of these polishing/stripping wheels. The quality to these are great if you’re not putting a lot of pressure on them. Let them do all the work and they’ll last you a long time during your work. They are not replaceable as they are on the Dremel where you can remove the screw and switch out the buffing wheel, so once they are used up, they are finished. The cleaning power or power for removing material on these is great. Offering you four types of grit to the wheels make your job a lot easier and faster. They fit perfect on a Dremel or any rotating tool similar to that and are super easy to swap out.

Great value for great product. These little abrasive disks work exceptionally well as light tasks. Not for heavy or commercial use, but great for typical DIY jobs. Cleaning rust off tools, cleaning nuts/screws/fittings, etc. These are like sandpaper, though, so a reasonable job may require 1 or 2 disks to get used up and thrown away. They are NOT permanent. Overall an excellent addition to the shop!

These do a good job of stripping the paint off of my 70 Corvette parking light components prior to painting. However, they do not last very long. It took about 8 of them on one parking light assy.

Normally in polishing your shaping comes first. Once the surface is shaped and flat ie smooth then you can start working your way though the grits of sand paper removing any Mill marks or sanding of the previous grit. these make quick work of working your way though the grits to get to that dull shine with the grey pad. Subjective Cons: (1) The brown pad (or rough grit) wears out the quickest. (2) Although these are small they are not small enough for the tightest of areas. (3) Will heat up your electric rotary tool as these are fun to use. (4) Just like any other rotary cutting tool these will catch corners and force your tool in the wrong direction Pros: (1) These are much easier to use then sand paper even on larger surfaces. (2)Even though these do ware out they do a lot of work before they are unusable. (3) The low grit Brown (roughest) pad will not shape (remove surface metal) but will follow the current shape rounding edges slightly. I suggest getting 2 packs of these if your going to be using these for more then one small project. I'm rebuilding a motor with a ton of parts to clean and polish. I have yet to get though the rough fast wearing pad yet but getting down there. Clean oils and grease off the surfaces first as these will smear it across your surface. Unless your oil,wet sanding.

They're not abrasive and there's little difference between "grits", basically like a Sctochbright in varying fiber sizes. Basically useless for steel or brass. The coarsest wheel won't polish out sanding marks from 320 grit sand paper, and the finest wheel achieves nothing better than a satin finish. They do work ok for wood, plastic and soft metals like aluminum or cleaning up a silver solider joint.

Allot for the value.

Love these! Purchased four times already!

I use these for polishing challenge coins done using a fiber optic laser. These are a MUST for anyone doing polishing. You will go through them quickly so buy the 300 size bag. Put them in a Dremel and spend about one minute with each grit and you will be amazed at the result. Want a higher quality finish? Get some one inch cotton buffs for the Dremel and some metal polish for a really high luster shine. I’ve gone through two 300 unit bags of these dang things in the last 7-8 months. I only wish I could buy the “gold” 100-ish grit ones separately as I go through more of those than any of the others. Oh well….