PowerStop Front Brake Pads For Acura ILX 2013-15 |Honda Accord 2003-17 |Civic 2012-20 |CR-V 2002-06 |CR-V 2012-16 |Honda CR-Z 2016 - Ceramic Brake Pads With Installation Hardware, 17-914

These item was just as described. I have 2014 Honda Accord it came really well bagged in the box. All pieces are described was included, and it greatly fits. The performance of this item is great. Great pads for money and they are quite and perform great on my accord!!

I've used these pads for several years now on a 2018 Subaru Crosstrek, 2021 Acura RDX, and now the 2017 Honda Civic coupe and have been very impressed every time, especially for the cost. More details on these pads and brake pads in general are below: -- Power Stop with a 16 in the part number are just the Z16 pads (example 16-914). Power Stop with a 17 in the part number is Z16 pads plus all the hardware (springs, etc). -- Brake pads have a 2 letter friction code either stamped in the backing plate or stenciled on the side of the pad material. The first letter is cold friction and the second letter is hot friction. Each letter is a certain friction range with G being higher than F, which is higher than E, etc. Just for documentation, the factory Civic pads were FF (front) and FG (rear). These power stop Z16 pads are rated GG (front), and FF (rear). However, there is less pad bite with the Power Stop pads on our Civic , which is a great improvement over the stock pads, and exactly what I was looking for. -- Most factory pads have too much initial bite (too sensitive), because the average driver thinks that equates to stronger brakes. These pads resolve that, making them easier to modulate (get the exact brake force you need) and the friction level stays more constant (linear) as you slow down, so you don't need to readjust your pedal force during a stop. These pads also seem to be noise-free and wear very well, at least for the 3 cars I've used them in. Between the 3 cars mentioned above, I probably have 140,000 miles on these pads. The front Z16 pads on the Crosstrek lasted ~85k miles, and I replaced them with a set of new Z16 pads. I haven't worn any others out yet.

I have purchased Power Stop brakes on 3 of my vehicles. I was only able to install 2 of the 3 sets. The installed brakes seem to work well. No noise, good stopping power even for my pick-up. The 3rd set did not fit my vehicle, unfortunately I attempted to install them after 30 days and was not able to return them. Bottomline - worth buying but check they are the correct fit before the 30 day return window expires.

Power Stop Evolution are great pads that produce minimum amounts of dust compared to many other pads. I have used them before. Quiet and problem free performance. The problem is when searching on Amazon for a 2012 Honda CR-V front brake pads 98% of the pads that come from the search are for front wheel drive. I needed the AWD pads. There is a difference in size. The all wheel drive pads are slightly bigger than the FWD. These 17-914 will work on the front wheel drive but not on the all wheel drive CR-V. The funny thing is the rear pads whether AWD or FWD are all the same.

Fits, quite and low brake dust. Can't beat it.

Installed same April 2024 with no cracks, squeaks or vibration. Great pads and even wear. Purchased same and installed again this year.

My go to brand for brakes and related parts for years. This kit was used for an 8 year old Civic. There were no issues with the install. Included in the kit was the brake hardware. I don't know why but there were 8 hardware clips included in the kit rather than the needed 4. I was also surprised that a packet of lube wasn't included, I used one from a prior install, so no big deal. Also, slider boots are not included. FYI. Operation is very quiet. No squeaks and no brake quiet was used. YMMV. The bedding procedure is a bit onerous, with 30 deceleration runs from 30 to 5 mph recommended after install. You'll need a quiet low traffic road to do this. Be aware. The bedding procedure for my larger cars required less cycles. FYI. I really like this brand. Thanks for reading.

no problems. perfect fit, car stops fine and no noise from brakes.

Perfect fit. Comes with all the hardware to install. Remember to grease your slider pins during installation. Mine were frozen stuck and I had to buy a new caliper bracket.

Exact fit complete with all the hardware and backing plates made for a fluid easy installation.

Good

Please note that these pads do NOT fit a Canadian sold 2007 Honda Accord 2.4L sedan. The pads and hardware are too small for the caliper and you will find yourself disappointed like myself and have to return the item. Buy front pads for a V6 coupe instead, they will fit. Pads and hardware are of good build quality, no complaints there.

Amazon system say it's fit , so be aware don't trust 100%. i pass the 30 days return , i'm stock with it ,lost 45$