

⚡ Power your network like a pro—no outlets, no limits!
The iCreatin 48V PoE Injector Adapter delivers up to 30W of power over Ethernet at 10/100Mbps speeds, enabling you to power and connect IP cameras, phones, and access points up to 100 meters away without additional power lines. Compatible with major brands and featuring plug-and-play setup plus comprehensive safety protections, it’s the smart, cost-effective solution for expanding your PoE network.
| ASIN | B00NRG4AMS |
| Best Sellers Rank | #114 in Powerline Network Adapters |
| Brand | iCreatin |
| Built-In Media | POE INJECTOR |
| Color | 10/100M PoE,30W |
| Compatible Devices | ip camera, ip phone, AP, router |
| Customer Reviews | 4.4 4.4 out of 5 stars (281) |
| Data Link Protocol | IEEE 802.3 |
| Data Transfer Rate | 100 Megabits Per Second |
| Hardware Interface | Ethernet |
| Item Weight | 4.8 ounces |
| Manufacturer | iCreatin |
| Mfr Part Number | 4328606459 |
| Model Number | PSE-480040 |
| UPC | 701936097910 |
| Warranty Description | 1 year warranty |
D**D
Great Active POE Injector
This 30watter works with our POE Doorbell Camera. The things I like, it's smaller size is nice for a 30w, also I like the power cable type (NEMA 1-15P to Non-Polarized C7 Power Cord), it does not have a separate power wall adapter so it fits normally in a power strip and it can easily be replaced with a longer cord if needed. If you need 1gig Ethernet, this is Not the injector for you. Most cameras are 100Mbps so this works fine...this is Injector is POE+ too... I do Recommend this 30watt Injector...
G**.
Perfect for any device that needs POE!
This POE injector is a reliable and cost‑effective way to power PoE‑enabled devices like IP cameras, access points, or VoIP phones without needing a dedicated PoE switch. It delivers a steady 30 W of power over Ethernet while maintaining solid 10/100 Mbps network speeds, making setup simple and clean with just one cable for both power and data. The compact design and plug‑and‑play installation mean you can get devices up and running in minutes, and built‑in protections help safeguard your gear from overload and overheating. Overall, it’s a practical must‑have for anyone deploying small‑to‑medium PoE networks on a budget.
L**W
This is a great POE injector
This is a great POE injector. I bought it to power my POE PTZ security camera. My camera can use up to 18W peak, and this is one of the few POE injectors that can output enough power for my camera. I went with a POE injector instead of a POE switch because a lot of the POE switches don't have enough juice to power all the security cameras that are connected to it. Be sure to check your POE power draw specification and the POE injector (or POE switch) power output. The hardware came very well packaged. The only complaint I have with this product is the LED is quite bright. It doesn't matter to me because it is installed under a desk so no one sees it. If it is too bright for your use, tape over it or flip it over so the LED faces down. It also comes with a nice 3-prong thick power cable. Overall, great product. I will be buying a couple more of this when I order my next set of POE cameras.
E**N
Not for GIGABIT!
This is 10/100 only! not Gigabit. This worked to power my IP camera which which only uses 4mb of data so gigabit is not needed. However, If I needed to power a switch or something with this, forget it. 100mb max. I will use these cheapies for cameras only and get a gigabit one for anything that uses more data. Time time will tell if these will last.
D**K
works fine for ubiquiti 6 lite, but not gigabit
This works just fine for my Ubiquiti 6 lite, but be warned it's not gigabit. Clearly says so in the title, so shame on me for not paying attention. But other than that, serves it's purpose.
D**E
Seems to work fine with a Meraki MR33
I took a chance on this one instead of buying the Cisco/Meraki-branded injector because it was 1) cheaper, 2) overall glowing reviews which I'm sure can be trusted because it's the Internetz, and 3) YOLO. I don't know the quality longevity since I just started using it but so far so good.
S**R
Worked great during 30 day warranty period
This product stopped working almost exactly 1 day after 30-day return policy was in effect. Completely worthless now.
A**R
works perfectly right out of the box
Arrived quickly, shipped in appropriate container which prevented any damage. I plugged it in and my camera SV3C came right up. I could not ask for more for such an inexpensive device. This saves me from having to pull power for receptacle at the point where i will mount this camera. I feel dumb for not ordering this thing sooner - will buy a couple more for other cameras.
J**N
Exactly what it’s supposed to do
I**S
Very good quality and also good for ubiquity access points
J**S
Bonne qualité
F**N
Conforme aux attente
M**C
This is a basic and fully functional POE injector. You plug one end of it into the wall and there are 2 ports, one is where you plug in your networking cable (input), and the other side is the combined POE output that merges the networking input with power. It has a detached power cord which is handy so it isn't a big brick that blocks the whole power outlet. The only downside is that this cannot be easily mounted to the wall or anything.
Trustpilot
4 days ago
1 month ago