Nilight Front Bumper Compatible for 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Jeep Wrangler JK/JKU Rock Crawler Winch Plate

This bumper was amazing quality. Heavy duty and looked great on my jeep. It even saved my life, got into a wreck and it was strong enough to take most of the impact! The lighting is excellent, and was so easy to mount. I recommend this bumper, not only cosmetically, but it might save your life too.

Looks great. Easy install. I did not have to move the vacuum pump in my Wrangler. Hardest part was getting old bumper off. Cheater pipe and break free helped. Their design made putting new bolts on a breeze. New bumper went on in 10 minutes. Wiring lights was easy too. Very happy. Took my time and did it in an afternoon.

I purchased this bumper with low expectations, anticipating a flimsy, cheap product. I was completely mistaken! The build quality is surprisingly excellent – far more robust than I imagined. Installation was straightforward. While I had a friend assist, it's definitely a DIY-friendly project. Anyone with basic mechanical aptitude should be able to disassemble and reassemble it without issue. The most challenging aspect is likely wiring the integrated lights. Once connected, however, they are impressively bright! I actually disconnected them from my factory fog light switch and installed a separate switch, allowing for independent control. The push bar features two 'tabs' that appeared a bit awkward without lights, so I added an auxiliary set. My next step will be to mount a winch, which the bumper appears designed to accommodate. One unexpected issue was the factory plastic rock shield beneath the original bumper. It protruded awkwardly and couldn't be directly attached to the new bumper, leaving the frame exposed. Since having a shield is essential for aesthetics, I trimmed the original shield and secured it to the frame with body panel screws. I'm very pleased with the result; it may even look better than the factory setup. I'll let you be the judge of that. Overall, I'm extremely satisfied with this bumper. Its quality, ease of installation, and functionality far exceeded my initial expectations. I highly recommend it!

Rear bumper shipped fast, instructions are a little vague, finding a good You Tube video helps with installation, overall, pretty easy to install. Bumper seems solid, lights are bright. Seems to be a good bumper so far, well see how it pulls my little camper.

I really love this bumper! Really bright and makes my jeep look stylish! My only problem is that the lights cover come off easily and in this picture only one cover is missing but at the moment three of them are missing :(

Just installed the rear bumper yesterday. Removing the old one was the hardest part, ton of bolts, have a breaker bar to help. Also an impact gun for the tow hook is very helpful. My bumper came packed with all hardware and bolted right up, no modifications needed. In Hawaii you need to have a safety check sticker on the bumper so I had to drill some holes in the middle to mount my safety check plate. That was probably the hardest thing to do. I haven’t gotten the lights hooked up yet, ordered a relay kit and switch so hopefully they will be running soon. It’s a solid bumper, just wish the screws weren’t gold. I’ll pick up some matte black paint and get that taken care of later. Update 8/21 Finally hooked up the lights. I plan on getting a pod system eventually so I didn’t really hard wire the lights. I ordered some 14 gauge sae extension wires and a sae to 12volt lighter wire. I also got a thing that turns your lighter into 3 outlets and it has switches to turn each one on and off. The lights run about 40 watts combined and the lighter has a 20amp fuse built in. Also the the lighter outlet has its own 15 amp fuse built in so I didn’t need to get an external fuse. Ran the wires up into the passenger tail light and then under the carpet all the way to under the passenger seat. It comes up right into the lighter socket. I can turn it on and off from the center console and nothing is hard wired. They are pretty blinding cause they kind of angle upward but they shoot a whole lot of light. I originally plugged them into the 12volt in the back of the Jeep but that would suck to get out every time I wanted to turn them on so ran it up front instead. It works well and took only about an hour to wire up. I wanted this configuration in case I needed the lights for camping, I can plug it into my Jackery and not use the Jeep battery.

Got my bumper in today, a day earlier than I was suppose too. Opened the box and it looked great, but something was missing? Oh the tire carrier!! I was shipped everything, but the tire carrier and the gate arm. Can’t get a hold of anyone to talk about this, so guess I’ll just get my money back and buy a brand name one I can rely on. Update One year later: After receiving my tire carrier I had no problem putting it on. The problems I did have with it was: 1) tire carrier would never latch, unless the padding was taking off. Even then it would never line up. After several attempts at removing, and putting back on. I thought I could deal with it. You literally had to SLAM it in order to get it to latch. If not, it would swing right open while driving. 2) The bearings would never go on just right. So with every removal and replace, I would try to get this right. Again, got it the best I could. While driving today, I noticed my spare was not in my rear view mirror, it was in the passenger side mirror. I initially thought I did not slam it with the strength of Thor, that it didn’t latch. I pulled off the road and tried to shut it. That’s when I heard the bearings just grinding, and I could not get it to go past the point in the pictures. I drove back home, with the gate open as seen. Once I arrived home, I removed the housing and it just fell apart like a cartoon. I was lucky enough that the entire thing did not fall on me when they did. I’ve had nothing but bad luck, and a bad feeling about this bumper since DAY ONE. I realized it’s cheap for a reason folks. So my advice, save your money, save some more money, and just go with the name brand. You pay for what you get, so if you’re thinking about buying this, just don’t.

I am very pleased with the quality of the product and perfect fit