FastCap Kaizen Foam Sheet for Tool Organizers and Storage - Perfect for Professional Contractors and Technicians - 57mm Thickness, 2' x 4' Sheet Size, Black & Red

Used inside a custom truck bed tool box drawer for my power tools. Nice and thick, cuts easy with a razor blade. Just trace and cut

Great deal on foam. Worked out great. I used a silver sharpie to mark out my tools and an exacto to cut out the foam. Be sure to take your time

PROs: Easy to cut, sturdy enough to create perfect fit, protects your tools, toys, equipment CONs: Glue holding the layers together is so strong it doesn't release & causes the foam to tear instead It was pretty easy to cut using a sharp hobby knife, and foam is a high quality. I highly recommend it, but deduct a star for the layers not coming apart but rather tearing which causes gouges and uneven surface.

I had heard so many people saying this was the best foam for tool boxes and so. Now that I have used it and seen how well it works I agree!! This foam is awesome!! I used it for my power tool set I bought and as long as you cut it precisely to the size of your tools it is great! Note- Some people described that the foam wasn't peeling off like it should (one sheet from another) and its true. It doesn't peel very clean, leaves a lumpy surface. In my case it didn't matter much since I'm looking to protect my tools more than anything, but if you are looking for that perfectly smooth surface under your tools, it most likely won't be.

Great product. Im not sure why people complained about being difficult to pick and not square. My sheet was square so I only had to make 2 cuts for my single drawer. I also had no issues picking it at all. You just have to make a nice straight cut with a SHARP blade and then peel it up as one solid piece. Don't try and pull from the top. Get your finger under there and peel it up like you are peeling up a stuck piece of tape and keep doing that. It won't be 100% flat but who cares, it's to support tools and what not. You can get fancy with a hot knife, soldering iron or other tool. TIP: Take some painters tape and put that down first, then you can draw out your tools. 2nd Tip: Take the painters tape and it apply it to your jeans/shirt first a few times. I found the painters tape DID pull up some of the black material if pushed down too hard but it worked GREAT to lay out my tools.

This is perfect for custom toolbox/chest storage and organization. Can be cut with a box cutter/knife or laser cutter! Shipped well too.

Arrived in one piece, no bends or creases. Was pleasantly surprised. Good quality as you already know.

I love this stuff and it's great for people who are OCD about organizing their tools like me. You can cut the foam to the overall size of your drawer and then spend a good deal of time planning how to organize the tools prior to cutting out the pockets One thing I noticed having used the solid black stuff a lot is that while the black stuff separates fairly easily along the layers when using proper technique (start peeling the layer back and then get finger into that seam by wedging your fingers into it - DON'T just grab and pull up or it will tare out unevenly) this white product doesn't separate nearly as well and I had to go back through with a flat razor and shave it down flat. It's not the end of the world since once you're tools are in place you don't see the bottom of the pockets you've created, but it's much harder to make the bottom off the cutouts totally flat. Also, I haven't tried melting it as I've sometimes done with the black foam, but I'm guessing the white foam might get discolored since the white would show that more than black. When I say I melt it: I take a piece of copper pipe and heat it up with a torch and then plunge half of it into the foam to make finger pockets to aid in removing tools from the foam that don't have an easy way to get them out otherwise; use a similar technique using a smaller piece of metal to make perfect cylindrical pockets to organize driver bits and such. Anyway, I love kaizen foam - once you get the hang of it you can really dial in any project or tool box and it's pretty reasonably priced. The black stuff is easier to work with but this type IS a cool look with the black face and white cutouts. See photos of both solid black foam and this white/black foam.

Great product. As advertised.

good & solid

Works well for sculpting out. Does it’s job, will be buying more. Good value for price.

La livraison a été rapide et le matériel étais parfait

simple a découpé avec petit Exacto J’utilise un feutre à ancre blanche pour les layout