P75B-S6

Ordered this case as a replacement, and I have not been disappointed. For the price, this case is fantastic. Box arrived early, was well packaged, with everything neatly packaged. Some reviews said their cases came with the fans pre-installed, but mine turned up with the fans in separate boxes, along with the remote and fan hub. So, set about installing the fans. Saw some reviews saying that the fans were difficult to install at the front of the case, but the front of the glass panel pops off, held in place by plastic tabs, once removed, it was easy access to the front of the case, cables tied up and routed through the case to the back panel, then front popped back on and all sorted. If you don't know this, then I could see how it would be hard to install them The case has plenty of room for your mobo, with riser screws in place for my ATX mobo. There is plenty of room around the mobo location for cable routing. I installed an AIO to the top of the case, and there were no issues with the mounting, sighting the pump and water pipes, or cable management Only minor disappointment was, there didn't appear to be any manual with my case, not sure if this is for all, or just mine, but not an issue for anyone used to installing in new cases, as it was all pretty straightforward. But, for someone not seasoned with installing into a new case, I could see there being some issues, like the comments in other reviews, about the fans being hard to install at the front of the case. It was easy for me, as I knew the case front was detachable, but without a manual, that may not be instinctive for some Overall, case looks great, RGB fans are quiet, lots of colour combos from the remote, and can be linked into ARGB header for software control. Very good case, and if I need another case for a PC, will definitely look for this model again

I purchased this case as a replacement for a constantly failing gamemax case, I have not been disappointed. Firstly this case looks fantastic for the price. This case is well packaged, much better than some other higher priced cases. The rgb fans come pre installed which saves a lot of time. I bought 2 additional ones for the top and they were straightforward. The rgb pcb controller is situated so it doesn't get in the way of cable management which is a plus. Cable management is great on this case, loads of room for the novice and the experienced builder. The build quality is also great, the case doesn't feel flimsy like some other cases I've worked with. The rgb remote works great as well as the io controller. (Remote is faster to cycle though) Plenty of airflow on this case also, given that is has a tempered glass front. The tempered glass looks sleek and has a slight dark tint to it which adds to the aesthetic of the whole case. Overall I would highly recommend this case as a cheaper option for crazy rgb builders alike. For the money it's an absolute steal, did I mention it can have 9 rgb fans! That's madness and looks crazy good when it's all set up. Great case, do yourself a favour and grab one.

Great tower with 9 cooling fans slots in total. It comes with 4 original Sahara ARGB fans but I have added coolmoons brand argb fans. not top quality but doing the job just fine.its very stylish case with top and bottom mesh filters,SSD trays,HDD slots and trays with soft rubber sides and supports,sort of mobo cables, mobo speaker,mobo,SSD,HDD and tower screws, cable ties, bits and bobs that u need for installments.running with win 11 pro of MSI z690 carbon WiFi mobo,intel i7 12700k processor, 2x 16gb Kingston fury beast RGB rams, zotac rtx 2080 ti amp gpu(can't get rtx 3080 ti or 3090 thanks to ongoing price scalping),adata gammix S70 blade1tb m.2 gen4 SSD,wd black p50 1tb usb c external SSD,Seagate bup 2tb external SSD, Corsair 750f RGB 80plus bronze power supply,noctua NHu12s CPU air-cooler(I'm not a fan of any liquid cooler,never been.just don't like the idea of any liquid running in my rigs) and many addons as GPU bracket,gpu rtx argb panel,argb power panel,coolmoon and Sahara ARGB hubs,gpu socket adapters,msi 12pin socket adapter etc. Easy instalments as long as u know what u need to start with etc. All the holes what I needed is literally provided inside the case. CPU and GPU temps are great with gaming in ultra settings up to between 40-55c(never seen it over 55c yet). Temps below 40c through audio rendering such as 60channels of DAW. Running 9 fans inside the case improves a lot of airflow so I'm happy with that.its not loud as it seems.cpu has been overclocked to 5.1ghz and rams overclocked on 6000mhz very stable.i don't overclock the GPU as no need at all.its extremely fast computer. It's multitasking all over the place.tower handles everything well. front panel is plastic but side panel is actual heavy glass and it sits well on the side of the tower with a style.i enjoyed building this rig.highly recommended

Case perfetto grande spazioso proprio quello che cercavo per non avere problemi con cavi e nuovi hardware da aggiungere, ci si può installare tranquillamente qualsiasi dissipatore a liquido. L'effetto con gli rgb e spettacolare sopratutto al buio. Il vetro temperato è vero vetro non di plastica come mi è successo con altri case. 4 porte usb sulla top del case comodi in più il tastino per gli rgb sul fronte regolabili anche con il telecomando.

Suite au changement de mon materiel informatique et a l'acquisition d'une carte mère avec controle RGB, je me suis dirigé vers ce boitier (P35 Sahara). Alors pour tout vous dire, boitier d'excellente qualité (verre trempé fumé pour le coté et le devant), le métal utilisé pour la conception du cadre du boitier est aussi de bonne facture. Seul l'arrière de celui ci fait un peu "cheap", mais bon l'arriere c'est pas tout le boitier non plus ;). Très beau design pour les pieds , une très belle finition. Concernant les emplacements pour SSD ou HDD, il y en a 2 pour les SSD (2.5) et 2 pour les HDD (3.5). Les supports HDD sont en plastiques et sans vis, juste un système de clips pour fixer les HDD. Pour les SSD, il faudra les positionner a l'interieur du boitier contre la paroi de la carte mère ou dans les supports pour HDD si ils ne sont pas pris par des HDD. Concernant les ventilateurs RGB, , ce n'est marqué nulle part alors je le souligne et j'insiste sur ce point, ils sont pilotables depuis la télécommande fourni mais aussi et SURTOUT, ils sont compatibles avec les systemes RGB des cartes mères (ASUS,GIGABYTE,MSI,ect...) Les ventilateurs se branchent sur un boitier de contrôle sur lequel vous brancher le port RGB de votre carte mère et après c'est NOEL ;). Je vous ai joint quelques photos du rendu et une video du système AURA Asus pour vous montrer que ça fonctionne très bien. J'espère que ce "petit" retour pourra vous aider a chavirer, merci de m'avoir lu.

Honesty, this is the best case I've ever bought. It has preinstalled RGB fans, with a preinstalled remote panel. Almost no work to set up. Good ventilation, easy to work with. Everything included, and easily accessible HDD/SSD storage. Clean cable management. Cannot recommend enough!

Molto spazioso, ottima gestione dei cavi e poi è stupendo esteticamente, a chi piace lo stile minimal questo è un must have.

Bon boitier avec beaucoup d'espace pour le refroidissement par AIO. Convient facilement à un radiateur de 360 mm dans le haut, donc excellent pour les personnes qui souhaitent overclocker leurs processeurs. Les œillets en caoutchouc semblent assez bon marché, mais beaucoup d'espace pour la gestion des câbles à l'arrière du boîtier. Le SSD se monte à l'avant et à l'arrière, 3 emplacements pour disques 3,5 pouces en bas à l'arrière. Non recommandé si vous avez l'intention d'utiliser une carte mère ATX étendue car la carte couvrira les trous de câble et rendra l'échange de fils très pénible. Vous devez en fait démonter la carte à chaque fois que vous souhaitez changer les câbles d'alimentation du processeur ou de la carte mère. Beau grand panneau latéral en verre trempé avec vis à serrage rapide pour un accès facile.