Dual Monitor Stand for Desk, Dual Monitor Mounts for 2 Monitors up to 27 inch, 2 Monitor Desk Mount Holds up to 22 lbs, Height Adjustable Swivel Tilt Rotation, 75x75/100x100mm (M002), Black

This dual monitor stand is great overall — very sturdy and easy to set up. It fits two 27" monitors perfectly with smooth tilt, swivel, and height adjustments. The only minor downside is that my monitors weigh about 10.7 lbs each, which seems to be pushing the limit a bit, so they can sag slightly if not tightened well. Other than that, it’s an excellent stand for the price and keeps the setup clean and organized.

Great monitor stand. I got the Quad. It's base is nice and you can put stuff on it unlike the other popular quad mount that is V shaped. You can get the monitors 98% aligned, then use gaffers tape for the last 1% (99% perfect, slight gaps that I couldn't fill). Strong, sturdy, tempered glass base, metal pole. And cheap price. This is the one to get for a quad setup. I stripped the bolt on the VESA monitor mount bracket and the seller took care of me. No worries.

I bought these to tidy up my workspace and mount two 27inch monitors side by side. Overall, it’s a great product, especially for the price. The stand is sturdy, well-made, and feels secure once everything is tightened. Installation is straightforward, and the base provides good stability even with larger monitors. The arms offer a wide range of motion—tilt, swivel, and height adjustments—so getting the monitors roughly where you want them is easy. The only challenge is aligning the two monitors perfectly. It takes a bit of patience and fine-tuning, and once you get them aligned exactly how you want, don’t touch them, because even a small adjustment can throw the alignment off again. It frees up a lot of space compared to using two individual monitor stands, which is a huge bonus. For the price, it’s honestly excellent. You get a solid, functional dual-monitor setup without spending a fortune, and once it’s dialed in, it works really well.

I have no complaints with this stand. It is not as nice as the Inland brand sold at MicroCenter, but it does its job. It beats the price of the MicroCenter one, thats for sure. It comes with all the hardware you might need, even long screws and bushings if you have a display that needs them. Assembly was quick. It comes mostly assembled anyway. You have to put the bottom on the post then attach the assembled arms to the post. Setting up can be a challenge but with help, its easy. After mounting the bracket on the back of the displays, you just slide them into the receiver on the arms. Once mounted, adjusting the position is simple, but can take a while as there are several joints which can be positioned to angle the displays as you like. The cord clips do an OK job of cord management, but the clips are not as good as the Inland ones. They do the job, but not as durable. I broke the one that goes on the post, but I tried getting it to hold a wad of wire. My fault. I recommend this stand.

I really like have my monitors on arms. I feel like it frees up a lot of space on the desk, it's much cleaner to look at, and allows me to have my keyboard further back on my desk (I like to rest my elbows on the desk to type). In shopping for monitor arms, I had two major things to consider: first, my monitors are mismatched sizes (30" and 27"); and second, one of my monitors is HEAVY (20.9 lbs, according to manufacturer website). This mount SAID the weight limit was 22 lbs per arm, and could hold two 27" monitors. I was a bit skeptical, but the price was really low in comparison and it looked like it might be close enough, so I went for it. When it arrived, I was immediately impressed by the shear weight of the product. I've used several monitor mounts of this style in the past, and this is by far the heaviest (which is a really good thing in this case). I love that it comes with both a grommet install kit and clamp for desk edge; both feel equally sturdy and up for the task. The stand feels well made and was easy to assemble. I really wanted a test run to see if it could hold everything where I wanted, but I really just needed to install the entire thing to find out if it was going to work. After tightening the bolt on the end of each arm as much as I dared, I placed the two monitors in their respective arms. To my surprise, it held the weight of the 30" perfectly (on a fully outstretched arm); and I was able to orient the two in a way that I'm happy. I LOVE that the kit comes with a VESA plate that screws on to each monitor (with thumb screws to make it even easier), and then the plate just slides over the receiving arm, tool free. This made my test fit and cable management easier to do. I did put the arms at the very top of the mounting pole to get the monitors ergonomically where I wanted, but they are perfect. Each pivot point has a screw with an included Allen wrench for adjustment. There is even a slot to hold each of the included Allen wrenches in one of the cable clips that you can tuck away out of sight. With two monitors, a webcam, conference call speaker, a laptop dock, and phone charging cables I have a lot of cables running down the back of the monitor arm, but with all the included cable clips (and a few velcro ties), everything is neatly tucked out of the way. Overall, great value for a solid two arm monitor mount. It exceeded my expectations.

Let’s get one thing straight: if your stand is falling over, it’s not the stand’s fault. It’s basic physics, gravity, and your poor setup skills teaming up against you. Balance it properly. Now, onto the good stuff: this was super easy to assemble! Took me about 30 minutes, and that includes taking apart my old setup. Did it all solo. The price? Totally fair in my opinion. I wouldn't pay a dime more for another one, and thankfully, I didn’t have to. All in all, I’m really happy with this purchase. It’s sturdy, functional, and doesn’t randomly collapse (unless you set it up like a Jenga tower).

Good and sturdy, very secure mount. Only potential issue is in setting up the height of it, you might need an extra hand to lift both monitors and hold them where you want them while you tighten the hex bolt to set the height.

Die erste Halterung kam sehr verkratzt. Allerdings sah die zweite recht ok aus. Halt ist gut, optik ok. Habe zwei große 27" Monitore angebracht.

Excelente producto, de buenos materiales y resistente para 2 monitores

I am using this product it's very easy to install and we can adjust as we want any side

Super sturdy. However, if you have a stand up sit down desk (the kind that you can remove from a desk), check the back of it to make sure that the mounts will work. I have a criss cross bar at the back of mine so the one method of mounting doesn't work and the other method requires a hole in the desk (which my stand up sit down desk does not have). They give hardware to mount the 2 different ways. We will have to drill a hole in my stand up sit down desk because there isn't a pre-drilled hole for the other method. That's ok though because we have the tools to make it work with the stand up sit down desk, and this mount is super sturdy so it's worth making the alterations 😉

its good for the price