Wirthco Funnel King 4 Qt. Drum Funnel 32425 with 2" Threads & Lockable Lid

well made works great

Nice solid funnel large enough to pour oil from a pan into it without spilling. It’s great that the threaded end can be changed! I modified it to fit a 3/4in Hedpack 5 gallon container and it works perfectly. With a PVC 1” to 3/4” adapter and a 3/4” nipple it is totally solid. I was able to fill the funnel to the top without any wobble or fear it might break. I even managed to force a garden hose filter into the bottom end which was difficult since I had to cut the lid to open the spout and then rethread that end to accept it, but it worked. I also ordered a couple extra lids so I have one to close it air tight and another in case I want to modify it differently. Overall it’s exactly what I needed.

Works as intended, a lot cheaper than other brands

Bought one of these 4 years ago. I accidentally cracked it while removing it from the support I mounted it to. Never once was I let down by this unit. Replaced with a brand new one. Great product.

So tickled to get these to finish this project! Now just wait for the rain 😄. Pleasantly surprised the threads fit in the openings just right and the filter already installed is an extra a+ for me . I can just scoop out the leaves when they get in with my hand

Nice size heavy duty

I bought the drum funnel because I wanted a threaded large throat funnel. The funnel was ok. It is a cheap molding with several surface imperfections. The injection molding tool used to make the funnel is in pretty bad shape. There is a 3mm ridge inside the funnel for 360 degrees. I don't know why. The funnel orifice is about 1" despite the 2" NPT fitting. The funnel is an assembly of a simple PE funnel and a 2" to 1" NPT reducing coupling. A black plastic fitting is jammed into the bottom of a straight funnel to "give" it threads. It is just jammed in. It does not seal. Oil will leak in the tread root of the fitting that is jammed into the funnel bottom and drip outside the funnel. I wanted the 2" opening as shown in the drawing. I had to heat the funnel and thermoform the orifice to a 2" ID and schedule 40 2" pipe OD. I tossed the cheap plastic fitting out. I bought a new ABS 2" NPT to 2' socket adapter. ($2.00) and bonded the fitting to the modified funnel. I now have a quart PE funnel with a real 2" npt fitting for ~$14.00, but I had to rebuild it. ---added note---I bought a second funnel and modified it also.--- I consider this funnel kind of crappy as is. But I expected it to disappoint me. It served as adequate raw material for me to make a real 3 quart funnel with a 2" exit orifice with a 2" NPT fitting. OK, so it is 3 quart. It is a 2-piece assembly. The bottom orifice is 1" diameter The joint between the 2 pieces leaks by design.

I can confirm this screws into small 5 gallon pail buckets.

Alles ok

Me sirvió para lo que quería, se me hizo caro nada mas

Ça fait parfaitement sir ce que je utilise

Baril huile

Worked good for what we needed it for. Made it easier to keep the area clean of mess.