Auxbeam 4 Inch LED Offroad Lights, P4 Series 90W LED Offroad Driving Lights, Super Bright White Spot Beam Auxiliary Work Light with Wiring Harness Kit for Truck Pickup SUV ATV UTV 4x4 Jeep

I purchased the Auxbeam white spot light version for my Toyota Tacoma pickup truck. I'm using these as a 2nd set of fog lights. I have the light aimed somewhat downward and they really help lighting up the road and increasing night time driving visibility and safety. The light beam is very focused and bright. I have no problems with unintentionally blinding oncoming traffic. The light housing, waterproofness, bracket assembly and harness assembly are all excellent. I highly recommend these Auxbeam lights!

Awesome product. Very bright and easy to install.

Used these as an upgrade on an antique motorhome restoration. They're VERY yellow and bright enough that I have to shut them off when there's oncoming traffic.

Lights bright, easy to install in my road armor bumper. Can’t beat them for the price. Have had them on the truck for a little over a month and so far they are water tight. No condensation build up in the lenses.

Pros: These are a great compromise between a flood light and one with lots of throw. Definitely not a flood lamp but not just a spot beam either. They are bright and pull the wattage that the seller advertises (wattage is not overstated). They can run on a higher voltage if need be (32 volts) without the brightness changing. Reasonably priced. Cons: Screw through headlight is undersized. I replaced it with an cam-action tool-less clamp from a bike seat since I need to be able to adjust them often. Might have to drill out the bracket to accept a larger screw. The larger screw is needed to get enough clamping on the light to prevent it from moving because these are heavy lights. The supplied screw is undersized and will most likely snap when tightened to enough torque to keep the light from moving. Revision: After running these for 30 minutes in a 65 degree F garage, the lenses started to fog up in the lower right corner (see picture). This is the first time these have been turned on, and they have never been subjected to the weather or moisture of any kind They haven't even been outside yet. Minus 1 star. I installed these on the front of a ag tractor. The difference is like night and day. (see pics, original equipment lights on left, these LED lights on right). I would buy them again despite their issues with the bracket and moisture in the light.

I have had these installed for over one year, and they still work flawlessly. Installation on a 2021 Ford Bronco Badlands was uneventful, with the exception that I had to drill a small hole in the top of the fuse box for the wire to access the fuse. I opted not to try and squeeze the wire between the top and bottom plastic box because I was afraid that the wire would fray eventually. I have the spot lights, and they are definitely not street legal. However, they do work well in off-road situations where more light is needed. For the money, I highly recommend these lights.

I was super excited to receive these lights to put on my truck when I got them and was unboxing them. Everything felt super nice and really good quality came with a pretty good instruction manual. For those who don’t know how to wire up lights, you could figure it out, but upon installing them once I got everything mounted up to my bumper and was tightening down the lights. I torque them down as far as you can, and they were still loose and then after getting all the wiring done, the switches wouldn’t even stick to my dash so I had to opt to ordering some different switches which I’m not super pleased about since they came with son switches Then let alone having to go out and buy hardware for these lights was not super pleasing since it was included also but other than that, these are really nice lights and our super bright, but I’m giving it a three stars since I had to go out and buy my own switches and hardware for these lights to be functional The lights are also a lot brighter in person camera doesn’t do it justice!

This set contains everything you need to wire the lights. The install was easy using the included wiring harness. The only thing I needed was the “A” pillar brackets which are also available through AMAZON. The harness is high quality and includes a fuse, relay, and switch. Would buy again!

These lights are fantastic, they look amazing and cast a bright clean, white light. Were easy to install, although dont automatically shut off when you shut off the ignition if you left the power switch for the light on. Also look to be very weather repellent.

So I have a 2005 Yamaha Kodiak and the lighting has never been great. Last year I purchased and installed the square auxbeam lights in the center of the grill which was a decent improvement but I was left with the regular headlights still lacking performance. After much deliberation landed on these p4’s. Well I am not disappointed. The lights fit inside the original light mounting area, and as seen in the video the performance speaks for itself plus in my opinion looks amazing. It’s early but so far so good. Looking forward to hitting th trails

Very bright lights with excellent output.

J'en ai installé 4 sur le hood de mon véhicule. Je travail en région éloigne ou il n'y a aucune lumière artificile sur des km .. voir des heures de temps. J'avais besoin de quoi qui éclaire plus que mais ampoule basse. Et j'aime pas vraiment le Style Led barre sur le toit. J'adore ces lumière, pour la grosseur, surprenant. Il éclaire bien en largeur et assez profond. Sur mon setup de headlight, j'ai installé des ampoules de haute 24,000lm. Les projecteur led ne vont pas aussi profond que mes ampoules hautes mais ils se complète très bien. Rien a reddire pour le prix. Hate de voir la qualité sur du long therme, je pense faire traité les vitres au rayon UV de 3M pour une plus grande durabilité

These are the best lights j have purchased. They are so bright! If you are looking for a good light you should get these. The installation for these lights was very easy. They supply a fill wiring harness. It's basically plug and play! Would recommend!