HUANUO 13 to 40 Inch Dual Monitor Arm for 2 Ultrawide Screens, Height Adjustable Full Motion Stand with 2 USB Port, VESA 75/100mm Mount, Holds up to 26.4lbs per Arm, Black

This is an incredibly nice dual monitor bracket, especially for costing less than $100. Honestly, this is probably a lot heavier duty bracket than I really needed for my dual monitor setup........but, since my monitors were slightly heavier than the 20lbs each that the next model down from these same folks was rated at, I decided to go with this model. The parts are very heavy duty, well made and fit together perfectly. The amount of adjustment is amazing. I was very impressed and it takes a lot to impress me. Every part you could need is included, as well as the tools you will need to do the assembly as well. The instructions are easy to read and cover everything if you study them and pay attention. As others have mentioned, there is an adjustment screw in the upper arm that is only revealed and can only be adjusted once the bracket system is fully assembled and installed. You have to push the upper arm down and then it will be easily revealed. Once you see the adjusting screw, it will be marked to turn one way to lower the upper arm and the other way to raise it. They give you the proper Allen wrench to fit this adjusting screw and it works very well. My two monitors are only about 27" wide and each weighs about 22lbs. You could easily accomodate much wider (and taller) monitors. I think I remember that it said up to 40" wide and quite a bit heavier than these. Seeing how well built and heavy duty this dual monitor bracket is, I can see where that would be no problem at all. Seldom, have I been as impressed with a product of this nature, as I am with this one. I would strongly recommend this bracket to anyone wanting to go to a dual monitor setup. This bracket setup even has removable plastic covers to help route and hide the monitor cables for a cleaner look. I am very happy with my purchase. See pics below

I have the single arm widescreen for my wife and the double arm widescreen for myself. These are great. There are a few caveats. If you want two 35" side by side, it might be a tight fit, they may not fit if you want them high up.... for ultrawides definitely going to be pushing it. I have a 35" ultrawide and a 27" normal aspect ratio monitor and I can fit them side by side if they are adjusted a bit lower than I want them. At the height I want them (eye level, I am a 6'4 man though) I use the widescreen horizontal and the turn the normal AR screen vertical and I game on the widescreen and use the vertical one for webpages/etc while gaming. as you can see from my picture i can probably get more wiggle room by moving the mount over to the right further and extending the widescreen further out. but I don't still dont think it would be enough for a horizontal side by side without dropping the height a little. which if I really cared I would do, but I'd prefer to have them eye level in this configuration. They work for my needs but any larger and I would have to move the arms down to have them side by side even with one vertical. How well will two normal AR 35" screens fit side by side? I'm not sure I think they will fit but you may need to lower them a bit below eye level. actually another user with what a picture of what looks like fairly large wide screen monitors side by side but as you can see from his picture the monitors are only like an inch or two off the desk. as a 6'5 man with a relatively low desk it takes up a lot of length just getting them to my eye level. That's fine though I don't mind having one vertical. these are the best ive seen that weren't several times the price level. If these wont work for you nothing reasonably priced will (at the time of this review). That said these are the most accommodating and best well built gas spring dual arms I've used. If you really want two screens horizontal side by side and your use case is bigger than you think will work, you may want to consider putting them on individual arms instead so you can space them further apart. That said, these arms are very good build quality. the gas spring in them is powerful, I have my wife's older pretty heavy dell ultrawide on a single arm one and it lifts it with ease w/out being topped out on the adjustment. You will have to push the arm down to the desk all the way to find the adjustment for the spring. I think a lot of people don't realize this and think it's not up to lifting their monitor because you can tighten it up some out of the box for heavier monitors. The arm should be able to accommodate any modern monitor given how light they've gotten and some pretty heavy older ones. all the adjustments are smooth and easy to do, the least smooth adjustment is the vertical tilt that happens right behind where the vesa bracket is, but its still pretty decent. the swivel and height of the gas spring are effortless. it looks nice, it feels heavy and durable. I'm an i.t. guy and ive used a lot of monitor mounts and these are well above average quality. Just need to decide if you want a double mount or two singles for your needs. id not recommend anything cheaper or anything pricier. this brands higher model/widescreen ones are the ones you want price/performance they are the sweet spot

The TLDR of this review is that this monitor stand works great and is worth the purchase. There are a few minor issues with the installation and arms that prevent me from giving it the full five stars but overall I'm very happy with it. Let's start with the good. They are made out of metal and not plastic (there are some removable plastic parts for cable management). They look high quality and honestly I was surprised at how nice they were for the price point. The clamp works like a charm to fasten it to your desk and I have zero worry about stability. I didn't use the grommet so I can't speak to how well that works (Too afraid to ever drill a hole in my desk). Finally, some have complained about the usb extenders, but I personally really like them. It gives me two free usb slots that I use to plug in my wireless keyboard/mouse dongle. If I wanted to be really picky, the usb cables provided were usb 3.0 and not 3.2, but for my purposes (keyboard/mouse dongle) I don't need the faster transfer speed so I'm happy with them. A benefit is that since they are ultimately just usb extenders, you can always buy two 3.2 ones for $10 on Amazon and use those instead of the ones provided. On to the not so good... As others have said, the instructions on how to install these aren't very clear. I was able to get it together without pulling my hair out, but I definitely had a few moments scratching my head trying to figure out the next step. All in all, I spent maybe 30 minutes putting it together so not too bad. The biggest problem was finding out how to adjust the tension for the two arms. It is not clear at all that you are supposed to push down the arm to expose the tension screw to use the Allen wrench on. I nearly broke the thing trying to adjust a different screw that was definitely not supposed to be moved! Speaking of the arm tension, my god are the arms tight when they arrive. I literally had to sit on the arm to bend it enough for the tension adjuster to become exposed. That was not a comfortable experience... Another unfortunate element of this monitor stand is that I found even at the loosest setting, the arms were still a little too tight to move my monitors easily. Admittedly my monitors are probably on the light end of the spectrum, 24" and weighing less than 10 pounds, but that is in the range specified on the store page so I expected it to be a little easier to move. Fortunately this is only an issue when moving the screens up and down, which I rarely do. Moving them side-to-side or rotating them is simple and convenient. The final downside: as others have said, the nature of these stands mean that they will not work well directly against a wall. There may be some confusion on the part of others though, because as far as I'm aware, this is inherent in the design of any pivot monitor -- you always need clearance in the back for the arms -- so I don't think it's fair to give them a bad score for that. Regardless, my desk isn't against my wall so this is a non-issue for me. Overall! This is a good monitor stand. For the quality and stability, I think it's worth the price. My wife assumed that these were in the $150-200 range when she first saw them, so let that be an indication of their quality. I also really like the 2 usb ports in the front, which is pretty unique among other monitor stands I've seen on Amazon. My only big gripes are the poor instructions for the tension adjusters, and that the arm tension is a little too tight even at it's loosest setting. Despite that, I will happily keep these and would recommend to others.

المنتج رائع و عملي جداً ذو جودة عالية

Leicht zu montieren und durch die Druckgasfedertechnik lassen sich die Monitore spielend leicht nach Wunsch verstellen! Super Konstruktion!

Set up in about an hour, no major issues except the USB cables don't seem to fit as shown in the instruction but as I wasn't using them it didn't cause me any problem. The arms and desk C clamp hold the monitors very securely, move freely and feel very solid. My only concern was that I had to tighten the bracket plate holding the monitor vertical to the absolute limit to prevent my main monitor 'drooping' even though it is weighs 20% less than the limit given.

So many VESA mounts on this website claim support for 32"+ monitors with weights up to 12kg, and the majority of them just don't even come close. I tried both of ErGear's offerings and they entirely failed, stemming from their very cheap-feeling construction. Figured I'd spend a little more and give this HUANUO arm a try, and hey, it actually works. It is solid metal throughout - the base is extremely steady, and the arms are very robust. The best part's the tilt mechanism that absolutely won't give whatsoever when fully tightened, which is great for my monitor that's quite bottom-heavy. The USB extenders built into the base are a great addition, and work wonderfully for discrete receivers if you have wireless peripherals. Can't fault it!

I was sort of skeptical about how this product would work - I am unfortunately one of those people who equate $$$ = Product Quality (Trying to break that mindset). Once I received the product in the mail, I was relieved to see how sturdy and sleek it looked. Assembly, as a few other pointed out, were difficult and the instructions were vague and not completely clear to understand - After step 1, the rest of assembly was not overly strenuous or complicated. Once assembled and positioned in place, my monitors were upright and not sagging! It was so easy to maneuver and make the slightest of adjustments - This has helped with my neck tension as I did not have my monitors at eye sight level - They also raised my monitors which has the worst placed VESA mount ever..... at the very top.... so essentially any monitor stand I have, my monitors still "drag" against the desk, but not with this mount!!! This was absolutely worth the price and quality is great - I do have to give a little knock against it.. The "pads" don't really work and it did scratch my desk quite a bit (Wood) however, where I positioned it, you won't see it - but if and ever I remove the stand the desk is sort of mangled; I wished I had put my own padding down.