AggAuto Universal 40"x13" Car Grill Mesh - 100x33cm Aluminum Alloy Automotive Grille Insert Bumper 3x6mm Rhombic Hole, One of the Most Multifunctional Shape Grids Black

Very nice, stiff protective screening for my radiator, oil cooler and air conditioning cooler. People on the Santa Cruz forum were complaining that when a rock hit any of the above it was a $1,800 replacement cost that was not covered under warranty. So at the recommendation of others I got 2 sheets of this in the 4x8 rhombic size. I didn't install it like others, zip tying it either on the outside or the inside of the grill like so many others. I'm not doing that to $40,000 new car! I watched a YouTube video on how to take the front end with installed grills off my car. being very careful it took me 45 minutes and the whole front end was laying on the grass in front of the car. It was then very easy, with regular scissors, to cut the screening to fit the back side of the grill. I left tabs on the screen where I saw screws on the back side that held grill in place. I then back the screws out one by one and screed them back in first through the screen tab then back in the hole holding the grill in place. That held the screening in place against the back of the grill. Start to finish, in my driveway, It took me 4 hours, which was well worth it, to get a factory looking job. The tools I used to do this were a small flathead screwdriver for the plastic pop fasteners, a 10 mm socket for the eight bolts, a pair of scissors for cutting the screen and a Phillips head screwdriver for attaching it to the existing screws holding the grill in place. I did have some concern when I finished because it looked so beautifully black with very little silver aluminum radiator showing, that maybe too much of the airflow would be blocked by the screening... I can tell you that this is absolutely NOT the case! We've had heat indexes over 105 degrees the last few days and I've driven the car around town, on the highway and sat in it parked on a blacktop parking lot with the air conditioning running for over an hour and the engine temperature gauge is exactly where it has always been, just a hair under mid-range. I have not seen the slightest change!

Great product easy to work with didn’t cut myself…solid build and good quality for the price…will order again soon.

Made my broken grill look great

Somewhat easy to mold and looks good. Make sure that you use goop glue. It will hold it permanently.

Worked great to make a custom DIY grille for my car! I bought this to prevent rocks from coming through my grill and damaging in the AC condenser. Cut it to shape with some wire snips, and used heavy duty black zip ties and heavy gauge aluminum wire to secure it in place. Looks like it came that way from the factory. Definitely recommend!

I used this for a speaker grill project on a home speaker. It made a good solid grill. One thing to keep in mind, if you need to bend it, be careful. If you bend it for example at a 90 degree angle, it tends to want to split apart at the bend. Overall good product.

Tough to use. I bought to use as a grill cover. Difficult to cut even with wire cutters. Also no instructions for application

This stuff is great. Used on an S14 JDM front bumper to protect the radiator and oil cooler from rocks. Molds to shape easily, cuts easily with tin snips, found that hot glue works really well for attaching to ABS plastic bumper on the back side.