RACO Hubbell- 915C 1 GFCI and 1 Duplex Receptacle 4-Inch Square Exposed Work Cover

Does what the picture says

Worked perfectly not available locally

Because the corners are indented there is limited room for decora. You have to nut and bolt the switch and receptacle to the plate. Not as expected.

I used this to add a light switch and power outlet to my tool shed. I needed something relatively tough to withstand occasional accidental impacts from moving things around in the shed. I also wanted the switch to be a decora/rocker type instead of the standard/toggle type because the decora switches don't stick out as much and are less likely to get damaged. This Raco 915C duplex cover is attached to a Raco 192 4-inch square box. Note that the outlets/switches attach to the cover and not to the box and you have to attach the outlets/switches to the cover before you install the cover on the box. You have to remove the screws that come with the outlet/switch and insert them through the front of the cover and then through the hole in the outlet/switch. Then install a nut (package of 4 included with the 915C cover) onto the screw to secure the outlet/switch to the cover. You will very likely need to carefully break off the small ears/tabs on the outlets that are meant for keeping the outlets/switches square with the wall. In my case, for the switch, I also had to snip off the small ears with threaded holes for attaching a typical switch plate cover to the switch.

Item is great and well built. But it did not work for my job.