---
product_id: 26817814
title: "Michigan Wheel 3-Blade Prop, Pressed Rubber Hub/Alum, 10.375 Dia X 12.5, Rh"
brand: "michigan wheel"
price: "₩20333"
currency: KRW
in_stock: false
reviews_count: 1
category: "Sports"
url: https://www.desertcart.kr/products/26817814-michigan-wheel-3-blade-prop-pressed-rubber-hub-alum-10
store_origin: KR
region: South Korea
---

# Michigan Wheel 3-Blade Prop, Pressed Rubber Hub/Alum, 10.375 Dia X 12.5, Rh

**Brand:** michigan wheel
**Price:** ₩20333
**Availability:** ❌ Out of Stock

## Quick Answers

- **What is this?** Michigan Wheel 3-Blade Prop, Pressed Rubber Hub/Alum, 10.375 Dia X 12.5, Rh by michigan wheel
- **How much does it cost?** ₩20333 with free shipping
- **Is it available?** Currently out of stock
- **Where can I buy it?** [www.desertcart.kr](https://www.desertcart.kr/products/26817814-michigan-wheel-3-blade-prop-pressed-rubber-hub-alum-10)

## Best For

- michigan wheel enthusiasts

## Why This Product

- Trusted michigan wheel brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Description

Michigan Wheel propellers are designed for trouble-free service and easy repairability. By using only the finest grade alloys, Michigan Wheel aluminum propellers are stronger than most OEM propellers. The rubber hub bonded inside every Michigan Wheel propeller helps protect expensive shafts, motors, and gear boxes from potential damage caused by underwater impact.Vendor Part Number: 072132Applications:Force/Chrysler/U.S. Marine: 20-60 HP, Non-Thru Hub Exhaust, 14 Tooth Spline / Pin Drive, 20-25 HP, 1979-1981; 30 HP, 1966-1976; 35 HP, 1966-1991; 40 HP, 1992-1994; 45 HP, 1966-1984; 50 HP, 1982-1994; 55 HP (Two-Piece Lower Unit), 1966-1983; 60 HP (Two-Piece Lower Unit), 1966-1975

## Features

- Stronger than most OEM props
- Rubber hub
- Protects shafts, motors, and gear boxes

## Images

![Michigan Wheel 3-Blade Prop, Pressed Rubber Hub/Alum, 10.375 Dia X 12.5, Rh - Image 1](https://m.media-amazon.com/images/I/41KLkhJo+pL.jpg)

## Customer Reviews

### ⭐⭐⭐ 







  
  
    Finish of pruduct looks nice. My issue is that the center hub is ...
  

*by O***Z on Reviewed in the United States on April 6, 2017*

Well i bought the item in hopes it would be last thing to check off the list before the season started. Once i received it, intial tought of product it looked legit. Finish of pruduct looks nice. My issue is that the center hub is not properly align with the prop its off by 3/16 of in. So when you put it on sits a bit closer towers the leg motor lower unit cap bearing.  So i got in contact with michigan Marine and they recommend me to a shop located in my city wich is a 45 min drive one way. So i took it there and  brought my old prop for comparison and sure enough the shop notice the diffrence and decide to relocate the hub. Once that was done everything look good once install. Took the boat out a few weeks later after recieved it and spend the whole day out on the water. So when i pull the boat out of the water i notice that the prop had been rubbing on my two screws that hold the cap bearing. Off the top of my head i new the prop had shifted backwards. So i contacted Michigan and recommendations from them was to take it back to the shop, once there they looked at it and told me that the cause was from the screws supposlelly where stick out. I uad previously drop off my orginal to them to fix it and i hadn't recieved it back just yet. Once i recieved my orginal one back from repairs i compared it and sure enough it had shifted almost a rntire 1/4 in. So the shop it self replces it with a brand new one after talking with Michigan. Once a gain the new replcement was off specs compare to my orginal one i showed the shop the diffrence but refused to accept that the prop was out of specs and continue to point out the screws where to far out. The first pic shows how the original one sits and you can see how the silver screws stick out a tad bit but no where near touches the prop. The second pic shows the new Michigan prop where it rub on the silver allen bolts on top and bottom. You can tell also how flush is the bronze center hub with the prop. On the third pic you can see how much diffrent the bronze center hub pop out away from the prop. So thats the main issue with product i kept the new replcement as a backup and decided to keep using my original one. If you ask me its a expensive spare part to keep it as a back up, my whole intentions was to do the opposite. Fix the orginal and keep that as a back up and use the new one.

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.kr/products/26817814-michigan-wheel-3-blade-prop-pressed-rubber-hub-alum-10](https://www.desertcart.kr/products/26817814-michigan-wheel-3-blade-prop-pressed-rubber-hub-alum-10)

---

*Product available on Desertcart South Korea*
*Store origin: KR*
*Last updated: 2026-02-23*