Creality Official PEI Sheet 235x235mm, Ender 3 Bed 3D Printer Flexible Magnetic Sticker Removable Heated Bed Build Surface Plate Upgrade for Ender 3/ Ender 3S1/Ender 3 v2 / Ender 3 Pro/Ender 5

This is one of the best mods that I have invested in for my Ender 3 V2! I was always skeptical about printing on anything other than glass to the point that even after this sheet had been delivered it took me 2 weeks before I summoned up the courage to try it out. Oh my! I wished I had done it sooner! Not only does the PEI sheet offer amazing bed adhesion it also allows you to remove your print as soon as the print finishes. No waiting for the bed too cool, just bend the sheet and your print pops right off with no need for a scraper whatsoever. Another bonus of being able to remove your print so quickly means if you are running multiple prints you do not have to wait as long for the bed to heat back up as it hasn't had time to cool off. The PEI sheet has a very nice smooth finish so your prints always have a lovely smooth finish to the base of them too. The magnetic sheet of adhesive is really simple to apply and fixes firmly to the existing metal bed plate. When applying the adhesive magnet be sure to start along one edge and wipe from side to side slowly working your way across the bed plate to ensure all air bubbles are avoided/pushed out as you lay the magnetic sheet. Once applied it is as simple as placing the PEI sheet on top and that's it. Being magnetic it makes for easier cleaning with less chance of knocking your bed leveling out of alignment as you just lift the sheet off and place it back on when finished. No need for clips so you even gain some extra bed area too! Not having to contend with clips along the sides of the bed means you can also print closer to the edges than you would with the standard glass bed. This is by far one of the best mods I have made to my printer and I will likely never go back to printing on glass ever again. I highly recommend the PEI sheet upgrade!

I have two printers and have been printing on glass for ages. The ender 3 had always been a bit hit and miss and can take a while to dial in which is frustrating, wastes valuable time and gives anxiety at the start of a print. Installation was easy, just stick down the magnetic sheet to the metal bed and then the pei sheet just snaps onto it. No more clips needed. Print need temperatures can come right down which has saved a fortune on print costs. Prints stick to the bed, first time, every time. Removal is easy, just lift the sheet and flex it and the print pops straight off. I was worried that I wouldn't get the same clean finish as with glass but as you can see in the photo the finish is lovely and smooth. Definitely one of the best upgrades for your printer

Far better than the original glass bed, no need for pva or spray adhesive, just occasionally scrape off residue with plastic scraper. Can't comment on longevity vs glass, but no evident wear yet afte 400hr of prints

As the title says. Needs a wipe with IPA now and then, and a hot soapy wash even less frequently.

I originally bought this for an Ender 3v2, but have since moved it to my K1 speedy. It is missing the small 'comb' at the back, but to be honest, I haven't had any issues as a result. If using it on the K1, you will need to print a couple of 'stops' for the back, but there are lots of free files on sires like thingiverse, and installing them is so simple, This is a much better replacement compared with the stock K1 bed and I would highly reccomend it.

This is much better than the stick bed plate that I got with my Ender S1 but I discovered that there is a double sided version soon after ordering with one side smooth and one rough. Never mind this is an excellent upgrade and you don’t need to install the super sticky adhesive magnetic layer if you already have one on your printer so it’s just a drop on replacement. Prints adhere well (I mainly print in PETG) which was a problem before upgrading and they also release quite well too. It will get scuffed up over time, mine already has a few dings and bubbles here and there but it is doing it’s job well. I would say this is a great and inexpensive way to upgrade your 3D printer particularly if you are having trouble getting the first layer down.

Produced great first-layer adhesion, but the item arrived with a blemish underneath the top layer. It looked a little like a bubble underneath where the top layer sticks on. Returned to exchange - but I have absolutely no qualms in doing so - print quality in the unaffected area was excellent with good bed adhesion.

After reading online about why some models don't stick to bed well I came across a suggestion to replace the original bed with a magnetic one. The difference is unreal, I think all printers should be sold with one of these because once you have it on, you know the difference!

Houd het te printen project goed op zijn plek.

War ein Geschenk. Man ist zufrieden.

I’m happy with the print results but I’d have imagined the carbon side to leave more detail in the print. But still, works good

Bonne accroche et facilité de démontage

Ich habe inzwischen die Standard Druckplatte und Glas durch. Jetzt wollte ich PEI Stahl ausprobieren und ich muss sagen, ich bin vom reinen Druckergebnis eines gut kalibrierten Druckers wirklich überzeugt. Der erste Layer fühlt sich wirklich hervorragend an, haftet sehr gut und löst sich später auch hervorragend ab. Die Magnetflächer ist leider etwas sehr stark, so dass man die Platte oft etwas schief haftet und recht stark auf die Federn des Druckbetts schlägt, was manchmal geringfügige Abweichungen von der Federeinstellung verursacht. Aber die Durckergebnisse sind es wirklich wert!