OVV3D 3D Printer Filament, PLA Filament 1.75mm, Tri-Colors Rainbow Silk PLA Filament, Rainbow PLA Filament with Silk PLA Red-Yellow-Blue, 3D Printing Filament PLA Filament 1.75mm +/-0.02mm, 1kg

Absolutely love the OVV3D Tri-Color PLA filament! The color shift is vibrant and eye-catching, and it really makes prints stand out without any post-processing. OVV3D Tri-Color PLA filament has a smooth, consistent extrusion with no clogging or tangling. Layer adhesion was solid, and the surface finish came out clean and glossy — perfect for display pieces and articulated prints. The filament was well-wound and printed reliably right out of the box. If you’re looking to add some serious wow factor to your 3D prints, this tri-color PLA is definitely worth picking up. I’ll be ordering more for future projects

This filament could make a very cool Nintendo 64 logo. It's a silk PLA, so everything about silk PLAs will apply regarding your prints. That said, it's very cool to see the colors slightly shift. I was hoping for a stronger chameleon effect, but that's on my expectations not being realistic. It still made awesome-looking prints. The layer lines were a bit more pronounced than I would've wanted, but that's also nothing a bit of smoothing can't fix. Definitely will get again.

This is the coolest color of filament I have ever seen!!! I thought it would be impossible to create that effect in the photos but it looks even better! It’s a smooth gradient of the colors and the filament quality is excellent. No issues printing at all!

The filament is a matte filament and looks very dry, also if you print a top n bottom of a dinosaur egg you’ll have to print the bottom first, then the top, not both at the same time or the fade of colors will not match, even by doing bottom n too it doesn’t match because some of the color is hidden in the screw section, the photo shows how it will turn out, this filament is not for short run items, because you’ll have a green, or a pink, or blue item but not a multi color item, it takes a long time for the color to change from one to the other when printing, the colors are pretty and would be Easter type colors but wouldn’t do well on small prints your hoping to be multi color, the picture of eggs apart does the one on the right printed both have at the same time and has purple on bottom n green on top but when assembled it doesn’t look correct, other egg was printed bottom first n top last, laying on table the color change looks correct, but when assembled part of the color on the screw gets hidden and it doesn’t match correctly, it’s kinda close but not great I hope this helped, use 2 or 3 color for easy results of eggs

I bought this 4 pack to give dual color and tricolor silks a whirl, to print some cheistmas gifts. I have now been futtzing with this for 2 days and havent managed to get a single print off. Moreover, I have tried different first layer/project temps, bed temps, and reslicing different projects using different infill patterns, shell thicknesses, brims and the like and have yet to get a single print past the first layer. The cardboard spools on my rolls are offcenter and wobble when they roll on the spool (probably has zero affect on print quality). When I run a first layer calibration, the filament lays down fone and looks like it should produce a good print. But no matter what object I slice and print even with those same settings, this filament globs up all over my hot end and creates a nightmare of a mess. I made a mistake in setting a print up and walking away for 30 minutes after it started, with the first print, and had this pla smashed all over and melted around my nozel and hot end. (Probably going to have to replace the hot end at this point, though it still seems to function, but is covered in this melted PLA film). I have never had this kind of issue with any other filaments I have ordered, and wouldnt be able to recommend this. Furthermore, its pretty expensive for 4 200g rolls of questionable quality. Your mileage may vary, as I see plenty of good reviews here which is why I purchased. But I suspect some bad QC is to blame. Printing on a prusa MK3

It is just PLA silk, but it lives up to its beauty. You need to know your printer very well to get the most out of it, but it is exceptional on prints. The one downside is you don't know the variation you'll get, and to help lock the color in properly don't print multiple objects on your plate. I had to print an item 5 times to get the color band I wanted, but it was worth every penny, the promo's I gave out made up for the business.

Absolutely beautiful color changes.

Overall, a nice filament. The reason I am giving 4-stars is due to colour, not performance. The colour is definitely more dull, not as vibrant, then what's shown in the advetisement photos. I made a 13" dragon and unfortunately that wasn't big enough to fully go through the rainbow colours. Next time I will be looking for a filament that changes colour more frequently then this one. I used this in my Bambu P2S AMS Pro with zero issue. This filament has a slow print speed, so just make sure you adjust the speed accordingly otherwise you probably will have problems.

Tolle Farbe. Sehr gute Qualität. Nahe der Realität

super