Siless Max 120 mil (3mm) 6 sqft Car Sound Deadening mat - Butyl Automotive Sound Deadener - Noise Insulation and Vibration Dampening Material (6 sqft)

If you want the money you're spending on equipment to pay off, you NEED to deaden sound! I've used every major brand and siless is my favorite to work with and the best value for your money, I'm not just adding weight, it's a thermal barrier and reduce outside noise. I turned a 10 year old, base model civic into what feels like a top tier Lexus . Does not offgas, no smell. Super easy to install. Make sure you get a set of rollers! They're required to achieve the advantages of this stuff, it MUST be adhered well and you don't want to tear the interior out twice.

As long as the surface is thoroughly cleaned, these mats will stick to just about anything. They provide my car with a tremendous amount of sound dampening and have made riding in the car 10 times more enjoyable. I drive a Toyota Yaris and although the engine is built like it's meant to last forever (imagine that), the rest of the car is not of high quality. Which means we used to get A LOT of noise coming from the road, other cars, etc. After I installed these mats which, by the way, I wasn't able to install on every surface I wanted to install them on (due to lack of tools to be able to disassemble certain parts of the interior), the noise coming from outside the car is nearly completely gone. I covered the underside of my hood, the entire interior part of the hatchback, most of the floor in the trunk / spare tire well, and the entire interior side of the doors. The parts I couldn't get to (or didn't want to) were: the ceiling, underneath the driver & passenger seats, behind the dash and the floor for the 2nd row seating. As you can see I left a lot of surfaces untreated with this product AND STILL it blocks most of the sound. To note: people recommended getting the roller tools to help install these mats. I got a few of them in different sizes and they worked O K. Not because of the quality of the tool but because some places you need to install these mats in don't have enough clearance to use the tool. That being said, for the larger surfaces, the roller tools help a lot. Also I found it very beneficial to use aluminum tape while installing these. The tape I used is specifically designed for materials that undergo high temperature changes (like your dryer vents, etc.). This wasn't because the mats were not sticky enough but because there were some places I installed the mats with small gaps between them. I'd also recommend getting some kind of fluffy insulation-type material for large spaces that need noise dampening. Rock wool, for example, worked great for me. As an example, the interior sides of the 2nd row seating walls had large spaces between the plastic interior cover and the metal part of the car wall. I'd install the mats on the metal but was left with 6" - 7" of space between it and the plastic cover. I chose to fill those spots (and spots like it) with insulation which provided EVEN MORE noise dampening.

This stuff is great, Really made a difference under the hood of our motorhome to keep engine noise down. Easy to apply and sticks like glue. Can be cut with scissors.

Works great and easy to install.

I don’t have a sound system, but I have an older car, a 2004 Corolla, and road noise is an issue. I installed this inside my door panels and trunk and the difference in sound is AMAZING. So many people get in and say my car “sounds good”, “doesn’t sound cheap”. It was easy to use and install with the roller (purchased separately). Worth every penny!

I have probably used around 30 plus boxes of this deadner in my build . It works great it's affordable compared to some of the other brands that are about the same why pay more when you can save money . There's several guys on my car audio team that uses it to.

Works as advertised. I've used dynamat in the past and it works just the same. You can argue about the difference in quality if you want but they both perform the same task. Deadening panel vibrations. This brand performs well and is easy to apply.

I imagine most of these things are fairly comparable, but I bought this one because it was what a guy used on YouTube for my exact problem on my exact rig. I bought a new Ford Ranger Lariat and I noticed that if I close the doors slightly hard or with the windows doors open, they sound like tinny trash. Not what you would expect from a $50k vehicle. Watched a YouTube video to get the confidence to start and finish the project and it was super easy. I didn't do as many layers or in as much detail that the guy did, but it solved my sound concern. Since there is enough left over after doing the doors, I may do the headliner at some point. One thing I got that I feel was worth was a roller to press on. It seems unnecessary, but it definitely helps adhere the panels better so they are more secure. So worth it to me for sure.

Awesome product, very easy to install and works really well!

Muy buen material, le quitó lo tembloroso a la carrocería de mi auto, también lo aisla del calor y del ruido... Recomiendo ampliamente!

Works fantastic. Super sticky & pliable rubber. Good thickness, really deadens sound. You need to put closed cell foam on top of this product to be most effective. Very happy

Used this product to deaden a pair of large speaker cabinets, great product to work with, used a pair of metal sheers to cut and trim the material which worked well, cleaned the MDF and it adhered very well too. The speaker cabinets sound much better now, when knocking on them they sound much less empty or hollow, playback sounds cleaner and has less echo as well. Overall very pleased with the outcome. For application I also purchased a metal roller which was a must, I couldn't imagine applying this much by hand alone.

Insulated my doors for a sound system build. This isolation is effective and easy to install. Using a heat gun makes it stick much better.