VEVOR Screen Printing Machine, 4 Color 1 Station 360° Rotable Silk Screen Printing Press, 21.2x17.7in / 54x45cm Screen Printing Press, Double-Layer Positioning Pallet for T-Shirt DIY Printing

This thing is really impressive for the price, though it does have a few drawbacks. Assembly is not too difficult, but takes some time because there are a lot of parts. You will want to use some real wrenches instead of the stamped junk that comes with it. Build quality of the machine is actually pretty good. Setup is key to getting good results, if you don't already know how to set it up or you have no mechanical sense you are going to struggle. There is no adjustment for front/back tilt on the frame clamps. This is probably the biggest problem with the machine. There are some workarounds, but it's a real paint to get it set up so all four frames sit parallel to the platen with equal off-contact. There are no micro adjustments for registration of different colors, it's difficult and time consuming to get your frames lined up properly. Once set up though, repeatability is very good. With the thrust bearings in the arm pivots and the guide rollers properly adjusted there is zero movement when the arm is down. There's more flex in the aluminum screen frames than there is in the machine itself. The larger plastic guide rollers are completely unnecessary, you can leave them loose or omit them completely. The smaller metal roller bearings are all that's needed. I just did my first multi color shirts tonight. I didn't get perfect color registration, but it was due to my own error. All of the shirts came out with the exact same offset. I've done a lot of single color shirts, print flash print, with perfect registration every time after lifting and lowering the screen. I've still got a lot to learn, but I think this is a great starter press if you want to get into multi color printing at the lowest cost possible. Learn how to set it up properly, have some patience, and you can get some great results.

Seems solid but be careful. Some of the metal edges are very sharp. After the traditional blood-letting I filed the edges down. Hopefully this is a good omen for future prints!

I love this machine for the price—it definitely gets the job done. If you’re just starting out, this is a great option.

Demasiada de buena recomendada

Really easy to assemble, easy to use if you have some experience with adjustments.