Royal Gourmet Dining Cart Table with Double-Shelf, Movable Stainless Steel Flattop Grill Cart, Hooks, Side Handle, Multifunctional PC3401S (Silver)

This is nice looking, sturdily-built dining cart for use in outdoor cooking! All the parts are made of quality metal parts except for the wheels. Assembly was extremely easy and all the pieces fit together without a struggle. The parts were all labeled properly and organized into a tray that was labeled well to fit with the instructions. We couldn't be happier with this cart and looking forward to using it alot!

This product as described online was the perfect solution for us. But the major hesitation was so many references to issues with assembly. We expected a major challenge; but it did not turn out to be nearly as difficult as we'd imagined. The instructions are indeed very brief, consisting of a series of well-marked diagrams. But no real word description that would have been very useful. We found the extensive six-step "instructions" provided here by another viewer to be a critical part of understanding (in words) how things were to be put together. If you first check out the parts list, you'll become familiar with the various pieces. Then keying off of where the threaded holes are, things begin to make sense. It is crucial to get the four legs started correctly, with the threaded single holes at the top of the 4 legs (which is the bottom of the cart as you put it together upside down). The reference is to have those holes facing "out" -- but to further define that it means "out" to the front or back of the cart -- not out from the "ends" of the cart. Installing the two cross braces and one longer brace was easy once we figured out that the longer brace ends were actually overlapped by one end of each of the cross braces. None of the instructions is clear on that point, although in fairness the illustration appears to show it. A major key is to keep most of the screws quite loose until after you've installed the bottom shelf (which as you're doing it upside down is of course on the top). That's the only way you'll have enough sway on the four legs to be able to fit the bottom shelf to the four legs. I would rate our skill at putting together things like this perhaps a 2-3 on a scale of 10. So these words are intended for those potential purchasers that might suffer from a similar disability. In that regard one final comment: When all is assembled, you finally get to put the wheels on. But at the very end the axle is then held in place, wheels on, by a cotter pin. There's no way most human fingers can push a small cotter pin through a tiny hole at an angle unless you have steel fingers. It turns out that by using a small screwdriver to hold the cotter pin open as you insert it, that final obstacle to success is easily overcome. Again kudos from prior reader comments on the assembly process. Especially the "six steps" spelled out nicely in an earlier review. We hope this slight embellishment might add to the very good advice you'll find there. And when it's done, you'll find you have an extremely sturdy unit that seems fully fit for long term outdoor duty.

It looks nice but quality is sort of questionable. Very thin, sheet metal construction. The box frame legs started to crush when tightening the bolts, that was alarming. None of the bolts use washers when they REALLY should. The entire thing rattles when you roll it, despite every bolt being tight. Wheels are cheap plastic, so I might replace those. The instructions are not the worst I've seen though. It came with a few spare bolts and a spare cotter-pin for the wheels. Came well packaged. That's all good news. It does look nice too. Plenty of storage space underneath. Matches well with my blackstone, and once its all together, it feels moderately sturdy. At least enough that I'll give it a go for my pizza oven. Will update if it falls apart over the coming days.

Very well packed. Instructions ok but not totally easy to read. Went together in about 30min by myself on my truck tailgate so that it was higher than on the ground. Very nice cart and will definitely work for my little BBQ.

This is a great cart, not flimsy, easy to put together, but I needed an extra hand a couple of times. I bought it to use next to my weber charcoal grill and my gas grill for extra counter space...it is great! It gives me so much more extra space to store and to hang tongs, spatulas, ect. I love the wheels and handle if you need to move it. I also bought a cover for it. I highly recommend this cart, it expands your work space for grilling, and it also has a place to put a gas tank if you want to put a grill or pizza oven on the top shelf.

Absolutely love this grill cart! It’s sturdy, well-built, and super easy to assemble. The storage space and holder for the propane tank make grilling so much more convenient—I finally have a spot for all my tools and seasonings. It rolls smoothly and locks in place when needed. Great value for the price. Highly recommend it for any backyard BBQ setup!

Bought this for my Ninja woodfire outdoor grill and this cart exceeded my expectations. It is very nice and sturdy, and looks great on my patio. Took about 20 minutes to assemble, and was easy. The base (bottom shelf) was the trickiest part to assemble if you don't have an extra set of hands. I propped one end of the base with a bar stool to provide some support, and pre-threaded the opposite corners with a set of screws to help get the base attached. Overall I am very pleased with this cart, and am getting another one to use in my kitchen to serve as additional prep space.

This cart is well designed, sturdy, and well built. It was easy to assemble, taking about 20 minutes. It does not include tools, but only needs a Phillips screwdriver and an adjustable or 10mm wrench. the top is smooth stainless steel, wipes up easy after it has been coated with grease, sugar, spices, or whatever. It has a 20 gallon propane tank holder, and several utility hangers for utensils. It is great as a prep table, a work table, or just a place to set your beer while you cook. It is easily moved on paved or smooth surfaces.

Total schöner Wagen, Aufbau problemlos. Sehr stabil. Nur der Haken gür die Gasflasche passt überhaupt nicht. Unsere Gasflasche (Normgröße) passt da nicht dran, steht jetzt eben unten drunter.

Utilisation pour un four à pizza au propane.support pour bonbonne bien conçu et hauteur de la table parfaite.

chariot robuste avec roues pour déplacement facile avec support pour 20 lbs propane , facile à nettoyer, convient très bien pour mon petit four à pizza.

Tolles Teil ,leicht zu bauen und stabil

Not the easiest to assemble for one person, but do-able. Instructions could be better. It's sturdy once assembled and it looks nice next to my BBQ. Nice and high too for my pizza oven.