Anycubic Kobra S1 Combo 3D Printer, 4 Stunning Multicolor with Anycubic ACE PRO, 600mm/s High Speed and 320℃ Hotend Free-Clog Extruder, Intelligent Drying While Printing, Built-in Camera 250*250*250mm

The value for money is off the charts on this printer. We've only had it for 4 days and the poor thing has barely stopped printing. We had so much trouble in the past with our Ender 3 series printer that we had almost given up on 3D printing. Constantly trying to level the bed, adhesion problems, failure after failure on prints. Not this thing. It's amazing! The auto bed leveling actually does what it says. We haven't had to make any manual adjustments of any kind. Everything went together easily, and all but a couple of prints have gone flawlessly. The only two the messed up were tiny little buttons that were really poor designs. Adding a support fixed them no problem and they printed fine. The only thing that was a little confusing was the difference bettween wireless and "LAN" printing. If you want to use the software on your PC and control the printer from there - you will need to enable "LAN Printing" even though it's using wifi. If you want to just print from the marketplace using your phone or what have you, then you have to turn off LAN mode and log back in using the qr code with your phone. It sounds way worse than it is. Once we figured it out it is actually fantastic. I can't recommend this enough. It is super quiet, super easy to use, and ridiculously fast (you can choose slow, normal, and sport print speeds/qualities). I'm sure there are cons to be had, but we're super happy with it right now and I can't think of any yet. I'll update when I find them :)

The Anycubic Kobra S1 Combo with the ACE Pro multicolor system has been a strong performer after several months of regular use. From day one, it has proven to be reliable and capable, producing consistent prints with good quality across different materials and colors. The multicolor functionality works smoothly and adds a lot of creative flexibility without making the workflow feel overly complicated. Once set up, the printer runs predictably and handles longer prints without issues. Layer adhesion, color transitions, and overall print consistency have all been solid, which makes it easy to trust for both functional prints and more detailed projects. The ACE Pro system integrates well with the printer and doesn’t feel like an afterthought or add-on. The only problems encountered so far were due to user error rather than the machine itself. After dialing in settings and getting more familiar with the workflow, those issues disappeared. This speaks well to the printer’s design and stability, especially for users who are still refining their process or learning new features. Overall, this has been a dependable and enjoyable 3D printer to own. It performs well over time, handles multicolor printing confidently, and rewards proper setup and operation with excellent results. For anyone looking for a capable multicolor printer that works reliably once configured correctly, this combo has been a great experience.

At first this thing was awesome and I honestly can see how if it maintains it's functionality long after the 5th or 6th print than it's going to be well worth the money but the unit I was sent started kicking parts off the bed. Then it started globbing up and pushed the nozzle into the bed and engraved a flexi rex head into the printer before it sent me a notification about the issue. No biggie new build plate new hotend without this plastic throat that causes the issue. Seriously. Look that up before you buy one of these. Anyway I get it all back together and find out the bed, which is just a chunk of plastic and some very thin metal pads has been warped by this extruder/hotend/nozzle fiasco. Which is now globbing up no matter what I do. Check forums, do bed level, test, print and it sticks to some spots before it globs up and drags plastic everywhere. FUN. so I get ahold of anycubic support and they suggest sending me another flimsy plastic bed carriage and a new bed assembly made of the same paper thin materials and I ask why I should have to fix a product under warranty? They continue to offer me A whopping 12 USD worth of PLA to "sweeten" the deal or I could send the printer back to them but I wouldn't be able to return the next printer should it go wrong. Also if I returned the printer they would take my old printer first and upon receipt would send another printer which to me sounds like; yeah we can refurbish that one and send you another refurbished or potentially the same one refurbished....then you cant send it back WHEN it inevitably has the bed warp. Nah. NAAAAAAHHHHH! So the options they gave where to do precision work on a brand new $600 piece of equipment I just paid for less than a week ago and the prize would be this KG of PLA to waste while I test the thing as compensation for what could turn out to be endless hours of work resulting in my return window closing before I got fed up (seriously watch these guys on YouTube trying to resolve this crap) NAAAAAAAH, you can have it back anycubic. I can see your sneaky crap a mile away you cheeky sods. I'll give it another go since this isn't for me really but this is go #3. the first printer I received was damaged beyond repair during shipping and had to be returned, the second or current printer went haywire and started blobbing instead of printing. So I'm hoping the third time's the charm for this cause if not this reviews gonna get even worse for you anycubic. How's that for asking me about my review!? You like it more now!? Got a 3rd printer shipped and after jumping in front of all the problems that come with ordering one of these I've finally managed to get a working printer that has been pumping out plastic junk like a champ. I do have issues with the exotic bedplates adhering on this printer but it seems to plant everything to the stock plate they send. After going through a bunch of BS I finally have a working printer. Just make sure you don't remote print from your phone unless you see it has KS1 even then I'd check the slicer first. I've done a lot of research and it seems if you send files from your phone to the printer it gets the settings from that file which may or may not have been created for your printer resulting in incorrect settings being applied automatically by the system resulting in failures that may or may not render the whole thing useless. It's also worth mentioning the first layer SUCKS on this printer. Always looks like crap. I've never seen a textured bed produce visible lines on the bed layer before. Still makes stuff. Just not stuff I'd sell. I've printed up all sorts of Halloween junk and dummy 13s for al my co workers to strike poses with this one.

Upgraded from an Anet A8 (2017) to an ender 3 (2019). I have to say the Kobra S1 is amazing! Great value! I do the auto level after like 5 prints (or 1 big one) to be safe. Quick and easy to setup! Literally print ready out of the box! Only used PLA, the only adhesion issues which were not many (like 3) were either because I didn’t clean the bed good or because the first layer was too fast, but that’s it! I use 70% isopropyl alcohol and a microfiber cloth to clean the bed every 2 to 3 prints. Tallest thing (which was the max height) I printed was an attachment for a shop vac, also printed 6 (multi color) coasters (at the same time) for my Etsy shop. Latest update causes the camera to lag in the Anycubic app and slicer but really no big deal. They will get a fix out soon I’m sure. I also heard (from Reddit) that they will be open sourcing the firmware (I think this month) but we will have to see.

Update: Ich hatte einen hervorragenden Austausch mit dem Customer Service und es gab eine sehr kundenorientierte Lösung, indem man mir einfach binnen zwei Tagen nach Kontakt einen neuen Hotend Extruder geschickt hat. Danach hat alles wunderbar funktioniert. Mit der richtigen Filament Einstellung habe ich dann sehr schöne Ergebnisse erzielt. Top zufrieden seither. Sehr empfehlenswerter Drucker, wenn man ein wenig Geduld aufbringt, falls mal was nicht klappt. Ich bin hauptsächlich im Miniaturuniversum und 28mm Terrain unterwegs. Die Minis sind OK für einen Filament Drucker und die Terrainteile sind ansehenwert. Klare Kaufempfehlung. Ich habe mir den Anycubic Kobra 2 pro Drucker zugelegt, nachdem ich die Rezensionen gelesen hatte. Als absoluter Neuling war mir die "Plug and Play"-Funktion wichtig. Der Aufbau war super einfach und hat beim ersten mal ca 30 Minuten gedauert. Ich schreibe "beim ersten Mal", weil ich mittlerweile einen zweiten Drucker habe, den ich ebenfalls zurückschicken werde - aber dazu später mehr. Nachdem der Drucker aufgebaut war, habe ich den Testdruck erstellt. Das hat wunderbar funktioniert. Ich war begeistert, wie schnell und einfach das war. Ein Drucker für diesen Preis (270 Euro) liefert so tolle Ergebnisse und das in einer überragenden Geschwindigkeit. Und dazu ist der Drucker auch noch wirklich leise. Ein sehr angenehmes Druckerlebnis. Dann fingen die Probleme an. Nach dem ersten Druck haftete der Druck nicht mehr an der Heizplatte und ich musste viele Drucke einfach wegwerfen. Schade um das Filament, aber ich bin ja auch Anfänger. Daher habe ich mir unzählige Reddit Kommentare und YT Videos zu dem Problem angeschaut. Dann habe ich versucht, in den Einstellungen des Slicers (das Programm, in dem Mann den Druck für den Drucker vorbereitet) für eine bessere Haftung zu sorgen (Temperatur geändert, Ventilator-Einstellungen, Geschwindigkeit des Drucks uvm.). Half alles nichts. Letzten Endes lag es einfach daran, dass die Druckplatte fettig geworden war, durch das Abnehmen des ersten Drucks (mit meinen Fingern). Also Spülmittel drauf und abputzen. Danach ging alles wieder wie eine eins! Wunderbar - dachte ich... Als ich dann meine DRITTE Figur fertigstellen wollte, spuckte der Drucker plötzlich kein Filament mehr aus. Die Düse schien verstopft zu sein. Als absoluter Laie (und wegen der sehr aufwändigen Schraubarbeit gemäß diverser YT Videos) habe ich mich entschlossen, den Drucker nicht selbst zu reparieren, sondern auf Garantiebasis einfach wieder zurückzuschicken. Ich mochte den Drucker aber an sich, daher habe ich einen zweiten bestellt. Drucker kam an, Probedruck wunderbar, erster Druck direkt wieder das Problem, dass das Filament feststeckte und somit kein Drucken mehr möglich war, ohne den Heizkopf komplett auseinanderzubauen. Der Support bat mich dann ein Video von dem Problem zu schicken und ein paar Randdaten der Bestellung. Das Problem ist, dass der Support in den USA sitzt und die Kommunikation aufgrund der Zeitverschiebung daher sehr schleppend ist. Ich wurde gebeten, mit einer Nadel in die Düse zu stechen (nach vorzeitiger Erhitzung der Düse). Ich bin ja kein Profi, aber ein Produkt, dass einmal genutzt wurde, sollte nicht gleich beim nächsten Einsatz blockieren. Da dies jetzt zweimal nacheinander passiert ist, rate ich leider vom Kauf dieses Produkts ab. Schade, weil ich wirklich begeistert war. Aber zwei dieser Erfahrungen reichen nur noch für einen Stern.

Livraison Amazon, top comme d'habitude. Concernant l'imprimante, en 30min elle est fonctionnelle, assemblé très simple et notice en anglais très claire avec les dessins, avec la calibration automatique et le contrôle de jeu plus que succinct (dans le bon sens) pour une première, c'est un régal. Essai d'impression de l'araignée, le requin et le dinosaure articulé (tout juste assez de fil en échantillon pour les 3) Aujourd'hui, premier essai pour refaire une manivelle sur un trépied laser Bosch. Modélisation sous sketchup, slicer prusa avec les paramètres de l'imprimante dans la clé USB fournie. Pas de paramètre compliqué a régler, juste les détails du modèle (remplissage, support,...) Visu sur prusa du rendu d'impression. Import sur l'imprimante avec la carte SD fournie avec l'imprimante, et top la clé USB avec lecteur microSD intégré. Lancement de l'impression, moins de 20min après, ma manivelle est prête. Correspond à la modélisation et aux dimensions dessinés. Pas de mauvaise odeur avec le PLA amazon, imprimante pour moi silencieuse, rapide et très satisfait du résultat d'impression, pour un amateur qui découvre l'impression 3D, aucun regret. Et surtout à un prix très abordable. Tout petit mini détail négatif, le clip présent sur le cablage qui verrouille une 2eme fois le connecteur de la tête d'impression qui ne tient pas beaucoup. Vraiment très content de cet achat ! 👍😊

La ANYCUBIC Kobra 2 Pro è una stampante 3D che promette velocità di stampa eccezionali e una serie di funzionalità avanzate per migliorare l’esperienza di stampa. Con una velocità massima di 500 mm/s e un’accelerazione di 20.000 mm/s², questa stampante è progettata per risparmiare tempo senza compromettere la qualità. Pro: Velocità di stampa: La velocità predefinita di 300 mm/s (massima di 500 mm/s) permette di completare modelli complessi in tempi record, come un modello Benchy in soli 18 minuti. Prestazioni elevate: Alimentata da un processore dual-core Cortex-A7 da 1,2 GHz, garantisce un controllo preciso dei motori e prestazioni di calcolo superiori. Livellamento automatico: La funzione LeviQ 2.0 con compensazione intelligente dell’asse Z assicura stampe di alta qualità e successo. Precisione avanzata: Il sistema di estrusione a corto raggio e l’ottimizzazione del flusso d’aria riducono al minimo le imperfezioni tra gli strati. Controllo tramite app: L’app Anycubic permette di monitorare e controllare la stampante da remoto, offrendo funzionalità come la supervisione video in tempo reale e la registrazione time-lapse. Contro: Non ne ho riscontrati. E' la mia prima stampante 3D e mi sono subito trovato benissimo, user friendly, intuitiva, automatica, stampa perfettamente. Conclusione: La ANYCUBIC Kobra 2 Pro offre un’ottima esperienza di stampa con una vasta gamma di funzionalità avanzate e facilità d’uso. Nonostante i problemi occasionali nella calibrazione, la sua velocità, precisione e versatilità la rendono una scelta eccellente per gli appassionati di stampa 3D e per chi si avvicina a questo mondo.

Es muy rápida, supero las expectativas, creo que compraré otra

no product support ,auto-leveling never worked, hotbed abnormal massages arrive frequently, worst first layer ,printer sometimes creating spaghetti or stopping after a certain height ,Print layers keep shifting and ruining the print,print is not properly sticking to the bed, PLA that is coming out is not sticking to the pervious layer.