LOVIMAG Copper Foil Tape, Conductive Copper Tape 4 Sizes (0.2/0.24/0.3/0.4Inch) x82.5FT, Copper Tape Conductive Adhesive for Stained Glass Supplies, Guitar and EMI Shielding, Electrical Repairs.

I used this copper foil tape while rebuilding a 2005 Fender Highway One Telecaster that I recently brought back to life. Before installing new electronics (pots, switch, and a set of Fender Texas Special pickups), I wanted proper shielding — and this tape worked flawlessly. What I liked: The adhesive is truly conductive Sticks extremely well to wood cavities Easy to cut, shape, and layer Soldering to it is clean and reliable Provides excellent EMI shielding for single-coil pickups My old relic’d Tele is now quiet, tight, and professionally shielded. Great product — absolutely worth it for any guitar restoration or upgrade.

I am using this for a few electric guitars of mine. I had tried other tape and it was my mistake to order some through another retailer where they only sent a measely amount of copper tape which didn't cover hardly anything at all. After needing more to finish my project, I decided to try tthis brand out of the many who are listing this product. It arrived really quickly and there is so much with my 1 inc X 66 FT size order of this. It can be placed really easily and sticks great. It works a lot better than the other copper tape brands that I had tried. It was packaged with a lot of care because it came in its own box and also had some plastic wrap around the entire roll. So I will definitely be ordering this again if I need any more. I started with my Peavey strat knockoff which is a guitar that really has some amazing tones for the price. Next I will be using the rest for the cavities of a Les Paul I have. Be sure to make a grounding wire connection to the shielding tape before you put your guitar back together.

There is nothing I can think of negative to say about this product. I use it to shield electrical interference of the guitars I build, and its so easy and slick, you'd think new ones would have it installed from the factories, but you know, if they can save a dime on each guitar they build, they will even if it means you get something inferior in its place, but they take their cue from the car manufactures and tell you how great they build everything when in fact they are built as cheaply as possible. But use gloves, it is capable of producing horrendous tiny cuts that you don't notice until you use hand sanitizer and after you are done screaming in pain long enough to look, you find twenty tiny cuts on your fingers... But it is so easy to use, rip a chunk off and stuff it into a pickup cavity and just push it into the bottom and sides, missed a spot, tear off a chunks twice the size and toss it in there and push it to form around the corners. There is no need to worry about continuity, the adhesive works like it should, it is easy to just use anything rounded to press it in place and smooth it out, it looks pretty cool when you are done, run a strip to contact the back of the pickguard and that should be covered almost to the edges, this effectively gives the pots the ground they need, no need to run so many ground wires, and on top of it all, you can easily solder wires to it wherever you need them. It is a great product and I can't recommend it more than I already do, but damn, remember to wear gloves.

Works vey well, but breaks easy in cavity corners.

Versatile and Reliable Copper Foil Tape I used this copper foil tape for EMI shielding in my guitar and was impressed by its performance. The tape is easy to apply, with a conductive adhesive that ensures a solid connection. It's flexible and can be shaped to fit various cavities, making it ideal for electronics and crafts. The adhesive holds well without leaving residue, and the tape's durability ensures long-lasting results. The appearance of this tape is copper, it works really well and has a good visual appearance to it.

Just what we needed to complete our short circuit project.

I bought this LOVIMAG tape specifically to shield the control and pickup cavities of my S-style electric guitar. It works great and completely eliminated the noise! Using this tape was a great experience. The 2-inch width was perfect for getting good, solid coverage quickly inside the tight spaces. The foil itself is nice and thick—it's not flimsy like some cheaper tapes that tear easily. The most crucial part is the conductive adhesive. I was able to test continuity across the seams where the tape overlapped, and it worked perfectly, creating a single, continuous shield. This is what you need to make sure your faraday cage is actually effective. After soldering the last connection and putting the guitar back together, the hum is virtually gone, even in my noisy apartment. Highly recommend this for any home guitar tech looking to clean up their signal chain.

Work good is easy to work with I put 2 layers for extra protection but there is enough on the roll to do several guitars if that's what you are using it for the adhesive appears to be conductive measuring it with ohm meter. Would buy again.

Bought this to wrap around wires to reduce interference. Not sure if it really helps. For the product itself, the quality is good, easy to peel and sticks well. I also read here that some people buy this to deter/get rid of slugs in their vegetable garden. I don’t use this but I find a slice of cucumber on aluminum foil placed in the garden will. Yes, a thin slice of Cucumber on aluminum foil!

It has great adhesion and the sticky side is conductive so there is no need to solder the individual strips together if they touch. Used it to shield a guitar, but you may want to get the 1 inch wide for that job since I had to cut strips out of the 3 inch one to fit the cavities. I highly recommend it to get rid of the dreaded 60 cycle hum.

Solid tape for EMI shielding for signal wires. 2-3 layers of well done grounded shielding suppresses enough EMI from a 100 watt (residual EMI power would be much lesser though) EMI source 10 mm away from the core EMI source, to make a low power adjacent device (microcontrollers etc.) work without any interference or restarts. Make sure to form a proper faraday cage cylinder by soldering the connecting edge line, else there will be considerable EMI leaks.

strong and double side, works fine

If possible, adhesive quality should be improved. otherwise overall quality is decent.