Stone Grip Industrial (Quart) Non-Slip Floor Treatment for Tile and Stone to Prevent Slippery Floors. Indoor/Outdoor, Residential/Commercial, Works in Minutes for Increased Traction

Works exactly as stated for Saltillo tiles. Our outdoor entry was very slippery, I was really worried a guest or delivery person would slip during rainy season. Followed directions, took an hour (total project) for about 400sf, worked like a charm. Footing is now sure, appearance did not change. Only caution is to remove items you don’t want impacted before applying product. I was a little fast and loose with our natural fibre rug, and it was stained by the acid, turning the light brown color darker. I used a bucket and broom to apply, controlled dousing in small areas, then pushing around product to ensure everything was wet. I did a test spot, as they recommend, to establish timing for application. Don’t leave, the process is relatively quick and you don’t want to over process. Do not do on a hot or sunny time of day, product will evaporate too quickly, pick a cool, shaded time. Have your hose ready for easy neutralizing process. If you have any sensitive plants in the vicinity, I would water them well the night before, and make sure your neutralizing rinse is thorough.

When we got the “Stone Grip” product and read the instructions, I thought "this is way too complicated, I'm going to send it back". But, something told me don't give up so easily. So I got on the Web and watched a few videos, coming to realize it wasn't that hard, I just needed to make good safety preparation since it is an acid-based product. For beginners, I thoroughly scrubbed the shower floor, rinsed, and dried it, avoiding cleaning products such as bleach (instructions say to use a neutral or weakly acid-based product for this step; bleach may react with the cleaner). The instructions could have been more specific here, as I wonder if most people really know whether bleach and similar products are "acid-based" or not. Then, once I donned a long sleeve shirt and work jeans, wrapped trash bags around my shoes, (couldn’t find my rubber boots!) put on my rubber gloves and a cheap Lowe's breathing mask, I was ready to go. The actual application took only 10 minutes; after which I repeatedly applied the easy-to-make neutralizer of water and baking soda (have it ready before beginning the treatment...very important; this is outlined in the instructions). RESULTS! It made our dangerously slippery shower floor MUCH safer and we're delighted. Note: the instructions on the bottle say to use the "Stone Grip applicator", but any long-handled nylon brush will do. DON’T get too close to the work surface while the product is in use, which is why a long-handled brush works well. So be safe, pay attention and this stuff works great...at least in our "slippery shower scenario". Overall, the instructions are the weak leak in the chain; otherwise the actual product is good choice, and the effect should last for several years.

We have an outdoor driveway-tiled area near a water faucet that our grandkids use after the beach to rinse off. It is slippery and they fall often. I treated it with this product and all the slippery went away. I am so pleased! I applied it directly to the tile and used a brush to really get it on there evenly. I will say where I hosed it off from the tile onto the sidewalk area it discolored it ever so slightly and not evenly, but I am not concerned with that. It did well on the tile and it is a uniform difference. It does take the sheen out of your tile, and I think that’s the point. It is just not slippery anymore. It worked! I get the feeling it will last the rest of the summer easily. I might redo it at the beginning of summer next year, and may think twice about how I rinse it off onto the sidewalk area. But I am quite pleased with how it is now.

I purchased this product to treat an extremely slippery (dangerously so) travertine shower in a condo I recently purchased. Even though it was quite expensive, I was desperate to do something quickly to prevent injury while showering. I was literally scared to take a shower for fear of falling. I diligently followed directions and completed the application as described. After the first go, there was no significant change. So I did the whole process again. After this time, there was some improvement, so I decided to give it a try the next time I showered. The following day in the shower, I could still feel enough slippage to make me uneasy. At this point, I just figured it was not going to work. However, I just had to do something or I would never feel safe to take a shower in my new place. Well, the next day, I completed the process for the THIRD time, and it finally worked, but by this time, I had used the entire bottle of Slip Doctor. My shower is just average size, 3x5, and I had hoped to used the product 3 times. Instead I had to use all of it to get a satisfactory result. Now I am only wondering just how long it will last.

Easy to use. As per instructions, I pre-tested on an extra tile to determine the optimum time to leave the product in contact with the shower floor. This is highly recommended in order to balance the amount of colour fading vs. increase in friction. I wound up settling on 3:40 and have an extremely slip resistant floor with slight lightening of the tile. Colour difference is not overly noticeable after treatment. Shower floor was deadly slippery before using, now I can soap my feet and dance on the wet floor without worrying about slipping.

Had used the product on my washroom and the result is excellent. It is not slippery anymore and also the result is fast. As the color of the solution is light yellow in colour , so it will be advisable to try out on non prominent area first to see if it does create any stain , especially if the tiles or flooring is white in colour.

Ich habe das Mittel auf glatten Fliesen vor meinem Haus verwendet. Bei Nässe war das eine reine Rutschpartie! Etwas in Sorge war ich, weil doch einige Rezensionen berichten, dass die Fliesen Schaden genommen hätten. Nichts davon kann ich bestätigen! Die Fliesen gereinigt, eingelassen und nach 20 Minuten erst mit Natronlauge " übergossen" und dann noch mit viel Wasser gewaschen. Und ich bin begeistert! Die Fliesen sehen aus wie vorher, aber haben definitiv deutlich mehr Gripp als vorher! Die Investition hat sich auf jeden Fall gelohnt! .. würde ich jederzeit wieder kaufen!

Worked perfectly the whole operation took 30 minutes from start to finish. Tiles now okay to walk on when wet. Clean, apply for result, neutralise and wash off & dry tiles. Ready to be walked on

Easy if time consuming to apply, and it works for about two years.