Coil Binding Machine with Electric Coil Inserter and Adjustable Side Margin | 20 Sheet Punch Capacity | Bind up to 440 Sheets | 46 Fully Disengageable Dies | 4:1 Pitch | 2-Year Warranty

What an amazing machine! Quality item, easy to ease, seems durable (I've only used it for 85 booklets, each with over 40 pages, thus far). The bonus is the electric coil threader... it is very quiet, works nearly every time, though sometimes a coil will go through but miss a couple pages... easy to unwind and correct. The whole experience in using this machine is excellent. Much cheaper than paying for this service... the machine has already paid for itself!

Works very well for my small office needs.

I just purchased the TruBind TB-S20A, I originally was going to buy straight from the manufacture for $10 less but after shipping cost the better deal was through Amazon. I had recently bought a different brand Coil Binding Machine and it had a handle on the right side of the machine which was hard to pull and I could only punch up to 5 pages at a time. The other difference was you could not pull the pins. I returned it when i received this one. I have already bound over 5 Books of 150 double sided printed pages. It is a great machine. Easily I could punch up to 15 pages it says 20 pages. This Coil Binding Machine is well built and easy to use. The punch tray is in the back of the machine. I emptied it each time I punched as the manufacture suggested. COIL ROLLER - Works well, with the bigger books my coils did not line up or the plastic coil was not thick enough to grab hold. So I rolled them by hand. I'm hopefully going to get to use the roller at some point. I'm sure there is a learning curve as well. BINDING CRIMPER - I am a lefty. The instructions say to make sure the red dot is on top when crimping. For a Right handed person that may work. I went to You Tube and watched "How To Properly Crimp A Coil Bound Book" a great tutorial I must say. In the Tutorial it said to turn the crimper over where the red dot is on the BOTTOM if you are left handed, that worked well for me. It is still a learning curve to get it to crimp right but I got better by time I hit the third book.

This is a great machine! I love making books & this is the best priced machine out there that will punch 20 sheets at a time, and for regular paper, I can punch even more than that. I make all the books I want & it looks just like I had it done professionally. It is easier most of the time to just put the bindings on by hand, the electric roller is hard to work with, it could be how I hold the book when trying to use it, but it doesn't always want to get the coil through all the sheets of paper, then I have to back it out part way & try again. The roller goes way to fast. Takes less time or same amount to do it by hand. UPDATE:. after owning for a while now, I still love it, and after making 100's of books, it is still very sturdy and looks new. I still don't use the auto roller much. I did figure out you have to hold the book very tightly on side with holes & it does work better. Also.....forgot to mention that the crimpers do come with it! So don't waste your money on buying a separate pair! You can also use any small pair of wire cutters & a set of pliers to cut the coil to size & crimp it

If you are thinking about getting this for high-volume commercial use, it may not be the best choice. For home use or low to moderate volume commercial use, I don't think you can go wrong for the money. There are specific aspects of this machine that probably deserve separate attention: Packaging One reviewer pointed out that the electric coil inserter and the silver drum underneath came damaged. While I’m sure that Amazon will make good on this, I was a little bit concerned since I have on occasion purchased marginal quality devices online without realizing it. One of the key markers of this type of inferior quality is its frequency of arriving broken. The outside box that my machine came in was pretty beat up. I think this may have been because our 4 fairly large dogs met the deliveryman in the driveway and I have a feeling he just tossed it out of the truck. Nevertheless, I found that Amazon, as usual, had done an excellent job of packing. The outer box contained cushioning material which surrounded an inner box. The machine itself was very securely packed with foam inserts. I found absolutely no damage or malfunction to the device whatsoever. Documentation Thank goodness for YouTube. The documentation with this device was practically nonexistent. It came with an 8.5 x 11 sheet of card stock which was folded in half as its full user manual. Something like what you normally would see for a “quick start guide”. All it really said was basically you put the sheets in, you punch holes and then you put the coil in. There is a small tab sticking out of the left side of the machine with no indication whatsoever as to its purpose. It actually turns out to be an adjustable guide so that you can switch from a 4 ½ mm border to a 6 ½ mm border if you want the holes a little bit further away from the edge of your sheet. There is a fuse holder in the back of the machine which is also ignored in the instructions but if your electric coil inserter seems like it’s “dead”, this is where to check the fuse. Right below the fuse is a removable tray where the little circles go that are punched out of the paper. It pulls out towards the back. This is also something that was ignored in the instructions and is not immediately obvious. Construction Quality The housing and work bed are plastic. This is okay though because the working parts of the machine are quite heavy and appear to be quite sturdy in construction. Some of the individual punches appeared to stick slightly on retracting but I’m sure this will improve as it “wears in”. By the way, the punches are lubricated and will stain the first few sheets that you punch. If it is an important presentation, you definitely want to cycle the machine a dozen or so times with scrap paper before you use it on important work. It is rated at 20 sheets punch capacity with 20 # stock. I think this may be a bit of a stretch. I did do 20 sheets of 18 # stock successfully but I would not want to do it on a repetitive basis both for the amount of effort involved and the strain on the machine. 15 sheets at a time is probably more reasonable. I really like the full handle design on this device. Many of the machines out there have a single crank type handle on one side. I can’t imagine punching holes in 15 sheets of paper with one of those devices without having it twist from the torque. Features As mentioned above, you can adjust how far away the holes are from the edge of the paper. Any of the punches can be disengaged so that you do not have any holes overhanging the edge of your sheet. It is not necessary to disengage all of the ones you’re not using, just the last one at the edge. (The last job I had “professionally” bound at Staples completely ignored this and all of the books had holes hanging off the edges of the sheets. Did not look very professional at all.) There is a gauge printed on the front bed of the machine that you can lay your sheet on to see exactly where the holes are going to fall and which, if any, punches you need to disengage. There is also a printed guide that tells you what size coil to use depending on the number of pages you are going to bind. This is handy but it would be nice to have a feature like I saw on another machine where you simply slide the document that you want to bind into one of several slots to see how thick it is and what size coil to use. You’ll notice that the tabs which are used to disengage the punches are not straight across, they arch upward. This is because the punches do not engage simultaneously but rather the edges engage first and then work their way to the center. This is an excellent design feature. It eliminates having to exert a huge amount of force to punch all of the holes simultaneously. Ease of Use The hole punching part is pretty straightforward. You line your pages up with the adjustable guide on the left-hand side, check to see if you need to disengage any of the punches using the circles printed on the bed and if you do, you simply pull out the silver knob of the punches that you want to disengage. Slide the pages all the way to the back, press down on both sides of the handle and you’re done. I have seen a lot of comments with regard to the electric coil inserter. Yes it does run fast. Yes it probably would be easier to use and just as effective if it was half the speed and yes it does take a little bit of practice. Unfortunately, here once again the instructions give you practically no guidance. The most important part is to manually insert the coil through the first 3 or 4 holes. Then gently press the coil against the rotating rubber drum engaging the loops of the coil in the grooves of the drum. Rest the coil on the silver roller for support. It is important that you press gently and evenly on the rubber roller. You may have to put a little bit more pressure on the left side of your document. If not, the tip of the coil has a tendency to slide under the last few pages on the top of your document instead of coming out the hole and going around again. Obviously it is also important to keep the pages of your document lined up as evenly as possible so the holes line up evenly and don’t snag the coil as it’s going through. I generally put a binder clip on each side of the document to keep the pages lined up while I am inserting the coil. If you follow these tips, you shouldn’t have any trouble after you get a little bit of experience. The machine comes with a crimping pliers that simultaneously cuts the excess coil off and crimps the end so that it doesn’t come out of the book. It is extremely easy to use, just make sure you have it oriented in the proper direction otherwise you will crimp the part that you cut off instead of the part that stays on the book. Final Thoughts Plastic coil binding is a very cost-effective and functional way to bind loose papers semi-permanently. The cost of the coils ranges from $.13-$.25 apiece when purchased in quantity and depending on the size of the coil. It is possible to reuse them, so long as you don’t cut them too short when you put them in. If you are getting ready to throw the book away, simply snip off both crimped ends and place it against the spinning drum and it will spin the coil off in a couple of seconds. (It is actually faster and easier to remove them than to put them in) Coil binding is more functional than comb binding because it allows you to fold the book over on itself and lay it flat. It is as cheap or cheaper than using plastic report covers and the pages are much easier to read. I definitely recommend this machine for the intermittent user.

This machine will help us to bind documents reliably for the foreseeable future. We had a heat-seal binder that has given up recently, and finally, this one will not fail. Thank you!

The machine itself seems to do the job. The case is plastic but seems substantial. The problem we had is that the power supply that came with it to power the coil inserter died after plugging it into the wall. Before I had a chance to plug it into the machine, the power supply gave two loud pops and the light went out. Since our only option was to return the entire package, I found a 12V supply to use with the machine. What puzzles me is that every power supply like this one that I have ever seen has come with a label with FCC approval UL approval and country of origin with input and output values. The supply that came with the TruBind unit had no label whatsoever, not even a voltage rating. Pretty poor. The machine came with very limited instructions. Glad I found a video on youtube showing use of the coil inserter.

I love this thing. It turns our office into an ultra low volume print shop (ultra low volume as in, like one book). We bought this for binding various documents we produce, in addition to some technical documentation that comes to us in PDF format, but have found a ton of uses for this. I've created summer writing journals for the kids, which look spectacular with clear poly cover and plastic backing. Search for presentation covers and you'll find them. I'll probably use this to make a calendar for the grandparents at the end of the year. I didn't have the oil issue some people mentioned after the first couple of cuts. Even so, what I saw was not enough to throw away the document. If you're that picky, then cut some scrap paper before starting your cuts for the document you're binding. You do need to periodically lubricate this. Things I like: - I like the fact that I can line up the holes perfectly and I can pull the little metal thingies on the front where I don't want a hole, which is useful at the edge of a book. - The hole cuts are clean - The coil inserter is cool; it does take a little practice and if you mess up, you can just flip the book over and the coil will spin right back out. It saves time. - Over the long haul it is much cheaper than sending our for printing/binding, which we used to do. - Crimpers are included Things I didn't like: The only complaint is that the crimper is tricky to use and I can't seem to get a hang of the crimp. There are no instructions for crimping, so you just have to figure it out. There is a useful Youtube video that shows how to use the crimping tool. The coil isn't held when crimping and just pops out. I might just keep an extra pair of el cheapo pliers to do the bend/crimp if I can't figure it out. Your mileage may vary. I recommend you get a variety of sizes of coils. We started with 1/4" and 3/8", but have some 1/2" on our shopping list. The pitch is 4:1, in case you need to know. Also, if you want durable covers, you can get clear poly covers for the fronts and poly covers for the back (we use black, because black goes with everything).