ROG RYUJIN III WB WHT CPU Water Block - Intel® LGA 1700, 1200, 115X AMD Socket AM4, AM5, Asetek Copper Cold Plate Full Color LCD Display/Embedded VRM Fan. ROG Fittings

The ASUS ROG Ryujin III 360 is hands down one of the best AIO coolers I’ve used! The Noctua Industrial PPC fans deliver excellent airflow while staying surprisingly quiet, and the cooling performance is top-tier, keeping my high-end CPU at low temps even under heavy loads. The 3.5-inch OLED display is a standout feature—it looks incredible and lets me display system stats or custom animations. The added VRM cooling fan is a nice touch, keeping motherboard components cooler. Setup was straightforward, and the build quality is top-notch. My only minor gripe is that Armoury Crate software can be a bit buggy, but once set up, everything works great. If you want elite cooling with premium aesthetics, this is the AIO to get! Highly recommended for high-performance bu

This cooler is expensive but it is high quality and beautiful . I love everything about it and it is so easy to install and connect everything . I tried quite a few coolers before this one and to be honest i like this one the most . Im going to keep it until it breaks or i build a new rig in few or what ever years . The reason i switched to this cooler is that i have everything else in my pc from ROG and want it to match it but it turned out i have the best temps with this cooler . 32C on idle and 45C when gaming . Also love that i cat monitor the temps of the cpu and gpu while using pc . I switched to this cooler from DeepCool Mistique 360mm and the temps are 5 to 10 Celsius lower with ASUS ROG Ryujin 360mm . Also the software is much easier to deal with than with any other cooler . The best thing about having the complete Asus ROG parts is that i dont need to connect any rgb wires and all works for some reason , not sure why ? I would guess it goes through the mobo . I mean the cooler is almost the twice the price than most others but im ok with it because is worth it . It is hard to decide what cooler to buy by looking the reviews because its not the same for everyone . In my case i would say it is perfect because i have all Asus ROG parts and there is no software conflict of any kind so it works perfect in my build . Btw , I have my 14700K oc to 5.6Ghz and the temps are just awesome . Also , ASUS - ROG MAXIMUS Z790 HERO (Socket LGA 1700) USB 3.2 Intel Motherboard ASUS - ROG Strix NVIDIA GeForce RTX 4080 SUPER Overclock 16GB ROG Thor 1200W Platinum II 1200 Watt Fully Modular Power Supply 80+ Platinum If the money is not the issue get it , if it is than you wont even look at it i guess .

So far a solid entry I upgraded from the Asus Rog Strix LC 240 II white to this unit in white and it performs as expected. There is some fan noise but you can adjust in the settings. People complain about Armory Crate app but I don’t have any problems as a lot of my gear is Asus and in that eco system all ready. Plus it looks amazing with the screen not many on the market and I got this at a good price.

Quality cooling power & continually kept informed of power usage, CPU & PC temperatures. With several stylish displays to choose or choice to use own/personal display. And software updates included are helpful.

This is a great AIO when it comes to temps and noise. It keeps my 9800x3d @ 37-39 idle and low to mid 50's gaming. I ran R23 and it held a nice 70 degrees. The noctua fans are very efficient, quiet & well worth the money. The only issue I have with this cooler is the limited customization options in armory crate. I am use to Thermaltake customization with their AIO and there are so many options.

ASUS never disappoints with their ROG line of hardware. Powerful AIO with a 240mm radiator and double Noctua 120mm fans combo has been a beast in my computer. Screen on the pump is clear and bright. Displays anything you can think of and in HD quality. Easy to install and the performance is top notch. Haven’t had any issues since installation.

love it, pump spins at over 3500 rpm, maintaining an extremely low idle temperature.

First CPU cooler: I'm not so irritated about the missing manual, because anyone buying this has likely already built several computers. Still, the fact that the 120mm fans came without hardware was a little irritating. The second-most irritating part is that you can see in the pictures this has clearly been used. Components such as this usually offer a choice: buy this brand-new at full price or pay less for an item with some cosmetic damage. I paid for the former, got more than the latter and for the price of this thing, I expected better. The third, and worst thing of all, is that this "CPU cooler" had a micro-USB cord on it! The same cord that typically charges small devices like cellphones and headphones was attached to the cooler's display instead of a 4-pin! Confused, I looked up the manual online but it showed a 4-pin connector. I contacted ASUS and talked to the heavily-accented tech support. THEY were confused. After verifying the 9-pin USB connector was connected, we went back and forth several times to establish that no, I did NOT have a 4-pin but had a micro-USB instead. Once this difficult concept was established, they offered me top-notch support... by telling me they would create a ticket to escalate it and that I'd be contacted in 24-48 hours. #sarcasm So, as this was part of the Amazon Prime computer build, which I have yet to be able to put together and use, I contacted Amazon and will just be replacing it through them. For reference, I attached an additional picture showing the replacement (top) next the original (bottom.) Note the 4-pin connector vs the micro-USB. Also, note the chewed up 9-pin USB connector. In addition to that, further evidence (if any was needed) was shown that the original cooler was pre-used. The new radiator had ROG plastic that contoured the shape on both sides whereas the original did not. Finally, as you can see on the CPU mount was shiny and clean when it arrived. The new one had a square of generic thermal compound on it. Second CPU cooler: I had it replaced with an identical model and, this time, I did get a 4-pin connector instead of some ridiculous cable. However, I'm finding it's not doing a very good job of keeping my new system cool. First, I tried to use TPM7950 on my 13900k CPU. I had temperatures spike up to 100C. I looked it up, people sang nothing but praises for the TPM7950, and recommendations were to redo the mounting pressure by loosening and tightening the screws. Temps dropped about 15°C, but when I went to do something as simple as install a game, the temperatures shot up to unfeasible levels again. It was enough to make the display spazz out and continually display "Warning 95°!" even while the computer was off. I had to toggle the power switch on the PSU to get it to stop that. I took off the TPM, applied MX-4 silver compound (I ran out so I used some spare compound), and retried it. Temperatures were a lot better, resting in the low 40s, but when I tried to run that game I mentioned, temperatures again shot up to 100°C. Tomorrow, a much larger syringe of Arctic Silver MX-4 will arrive, and I'll redo the application on the CPU, but this cooler is NOT doing me any favors. I even removed the Noctua fans and added on Silent Wing Pro 4 120mm fans, because they move a lot more air, and yet this cooler is STRUGGLING to keep this CPU from burning itself to a crisp doing the simplest of things. So, that makes me wonder: if I redo the thermal application with high-quality compound, and it STILL wants to melt down like a nuclear power plant, when do I do then? Do I send a SECOND CPU cooler back to Amazon? Do I bark at Asus support to correct the problem? They seemed clueless the last time I talked to them about the first one, so I'm skeptical about how well they'll do with the second. I have what is supposed to be a top-of-the-line system with components that cost thousands of dollars, and it amounts to a very heavy paperweight as I try to figure out how to keep it cool. So far, from Asus and in this one computer build, I've come across these two CPU coolers (one having the wrong cord and the other under suspicion of cooling poorly) and a motherboard that would pop errors when any memory was used in the first two channels. Asus used to be a good brand to me. Now, I'm wondering how many circles they're making as they keep cutting corners. So far, they're 0/3 in this build. Not impressed Asus. Not impressed at all.

V.good

Excelente 😁👍

Encontré este disipador de calor con refrigerante líquido a buen precio en Amazon el cual recomiendo ampliamente por sus entregas seguras y garantizadas. Este disipador con refrigerante líquido es muy indispensable para el Microprocesador Intel Core i9 de 14th Generación y todos los demás componentes qué se aprecian en él vídeo pará una PC Gamer Súper Potente de Alta Gama. Gracias Amazon.

すべて白を基調としたASUSで揃えて自作しているので、こちらは高コストですがPCがカッコよくなりました。冷却性能も文句なしです。

Great looking AOI, LCD screen can display CPU statistics or play animations. Was really easy to install and keeps my i9 14900KF at 34 degrees on idle and is a champ while gaming. Works well for me in armoury crate to customize and sync rgb and manage the screen. The radiator is big! Also, the fans magnetically daisychain so.install is nice and clean looking.