VIVO Single 17 to 32 inch Monitor Height Adjustable Counterbalance Mechanical Arm Desk Stand, Classic, Universal VESA Mount, White, STAND-V001OW

This is an amazing monitor arm for the cost. I checked a lot of longevity and quality focused online forums for recommendations on monitor arms that didn't suck, and I'll say that these don't disappoint, at least so far. They don't sag or otherwise move in a way you don't want them to after you've positioned them, they weren't terribly hard to assemble either, and they've got a great range of movement in all directions, whether you need them to just be higher up, or way further back from your face. The base takes up about 2 inches of space forward into the desk, and doesn't feel obtrusive. It's holding my relatively heavy monitors, with extra weighty cables, and can take a bit of downward or upward pressure from my hand on top before it begins to move, so it's definitely very sturdy. One thing you MUST be aware of though, is that if you have your desk close to the wall, this will have to push your monitors closer to you, since the arms extend backwards if you push the monitors away from you. Think of a "W" shape, where the two points at the bottom of the W are the back of the arms. Pushing the monitors further away makes it more of a point, and pushes that point further back, meaning it could bump into your wall if your desk is too close. Give your wall and your desk some room where possible.

In my initial setup, I sought to optimize my desktop space by utilizing an arm for my 30-inch 4K Asus display. This display, weighing 18 pounds, is manageable for the arm to hold it without any issues. When considering the arm’s placement, it is crucial to evaluate the proximity of your arm to the wall. If there is sufficient space on your desk to position the clamp centrally, this configuration offers the most comprehensive functionality. Conversely, if your desk is adjacent to the wall, you will require additional space to accommodate the clamp on your desk. In such cases, the clamp will need to be positioned to the left or right of the center, rendering certain features ineffective. 1. Potential challenges include cable routing and display movement. Cable routing necessitates ensuring that cables have adequate reach. Additionally, as you move the display towards you, the arm may not maintain its level, necessitating adjustments at each step. If the arm is positioned to the right of the center, it will begin to tilt to the right, and the same issue occurs on the left side. The arm’s design presents certain inconveniences. Tightening the arms to secure the display can hinder adjustments, as loosening them results in sagging. Furthermore, if the arm is only positioned vertically, it will maintain its level but begin to move to the right. Moving it back to the center requires repositioning it downward. The same principle applies when moving the arm downward, causing it to tilt to the left. To mitigate these issues, it is advisable to adjust the arm to its most frequently used position. In my setup, I installed speakers on both sides and centered mine at the appropriate height. Lastly, cable management is a critical aspect to consider. The arm itself was relatively straightforward to assemble, but concealing the cables proved to be the most challenging task. It is essential to plan the routing of cables through the arms. I utilized a power cable, two HDMI cables, and cables originating from both the right and left sides. Due to the arm’s placement, I had to procure a longer power cable.

Pretty easy and straightforward install. Felt sturdy and worked well. I did end up returning because I couldn't angle one monitor how I wanted. The mount works well to keep to monitors flat against each, however I wanted to have one monitor offset at an angle and the arms weren't long enough to be able to do with without the monitors interfering with each other. I went with two single arms instead and the setup works much better for me. I used 2 27" inch monitors, so perhaps with smaller monitors I could angle them how I would want. With that said though, if you want you monitors to be positioned flat against each other, this mount will be fine. Hindsight 20/20 for me, but if you want to have one monitor angled differently and have more positioning options, just get two single mounts instead. For what this product is though and how it works, it's pretty solid for the price.

They work well easy to install, take up very little space easy to move they can be tilted, and placed at any angle easily, you can change the height easy, the quality is great overall 9/10

I recommend with a sturdy tabletop, ikea wooden tops cave in. When I switched a sturdier material it was perfectly compatible. Quite easy to assemble on my own. A fit of two 27” monitors was a hair too difficult for my liking. Otherwise whence you tune it with provided gear it’s perfect.

These monitor arms work as advertised. I have an enclosed desk and therefore had to use the grommet installation (not the simple C clamp to table top method), but it was pretty sttraight forward as long as you have the tools. Everything needed for installation was included, even the small bolts for the back of monitor VESA mount. After mounting and adjusting the tension to the two arms, I couldn't be happier. Desk top is clear of monitor mounts with more space to work. Cable hider covers are included for the two sections of each arm, which is a nice added feature.

I replaced my old monitor arms with this VIVO dual monitor mount and couldn’t be happier. I love that the arms are completely separate, so I can adjust the height and angle of each screen individually. Setup was straightforward, and it’s been reliable and sturdy so far. Highly recommend for anyone looking for flexibility and stability.

Great product, holds 24 inch screens well. Took about 20 minutes to set up, the model sent was slightly different than the video on how to assemble. I would consider putting a little lubricant on the hinges. Full range of motion, strong. great buy for the money.