WORKPRO Premium 28" 2-Drawer Rolling Tool Cart, Heavy Duty Utility Industrial Service Cart Storage Organizer with Wheels and Locking System, for Mechanic, Warehouse, Garage, Workshop, 400 lbs Load

I’m extremely impressed with this 28” 2-drawer rolling tool cart. Very good quality for my needs! I bought it for glazing supplies in my pottery studio. This cart will hold all my glazes, plus it has locking drawers for brushes and other tools that might more easily “walk away.” It arrived very thoughtfully packaged; almost every piece was either well padded, boxed and/or wrapped in cling wrap to protect the finish from the scratches of transport. It even came, intentionally, with extra bolts and screws. It arrived in just a couple days, too! The cart went together like a dream. Assembly was easy, following the included instructions (and I only saw one minor typo). I used a tabletop, padded with the tray and drawer mats, for initial set-up. I first attached the wheels to the bottom shelf, as instructed, then added corner posts. All bolts go into nuts, pre-attached to various parts. Because they did this in advance, I didn’t have to reach underneath or around corners to hold any nuts in place. Next I moved what I had put together to the floor, locking the wheels and placing it inside one of the large foam trays that came as padding in the shipping box. This kept the whole assembly from moving a lot, yet allowed me to slide it around on the floor, rather than me moving all around it as I put pieces onto the different ends and corners. It was just me putting it together, and I had no problems doing it alone, though I can see how a second person might have been helpful. Being by myself, one thing that helped is, I put more bolts into the corner pieces initially, than instructed, to hold parts in place while I secured other pieces, then I removed those, out of order bolts, so I could add parts that hadn’t been joined yet. (I forgot to remove some of those bolts early on and had to go back and loosen up the bottom of one of the peg boards to remove a couple of bolts to secure another piece where those bolts needed to go through later in the process.) I did struggle for a bit putting the drawer fronts onto the drawers. Lining up screw holes on three pieces of metal, through a hole in the outer layer of the side of the drawer took me some time and patience. I used a pottery tool called a needle tool to help keep holes on the bottom of the drawer fronts aligned, as I put screws in top holes. A thin, stiff wire or a finishing nail might work, too. The drawers are quality; they slide well and stay shut when closed, even when not locked. The drawer lock is pre-assembled and installed on one of the drawer sides. Having locking drawers will be a nice bonus. I chose this WorkPro cart over several other less expensive carts for several reasons: 1) reviews and photos showed me the metal used is heavier than other carts, and, this cart seems like it is much better quality for a bit more money, 2) it measures deeper, side to side (just over 17” deep, rather than 13” or less), and the inside of the top shelf measures about 17 and 1/8th deep and 27 and 7/8” wide. 3) it has two drawers (not 1, or none), and though they are more shallow drawers, this will work better for me, 4) it is a taller cart than many of the other models available (35” from floor to edge of the cart’s top shelf, 36.5” from floor to the top of the handle), 5) it included mats for all the trays/shelves and both drawers, and might hold tools in holes on each end, 6) magnets will stick to this cart, and that may allow me to label my shelves magnetically, 7) all of my most common commercial glaze bottles from Amaco, were going to fit on the lower two shelves (5x8 bottles , or 40 bottles per shelf), and since the shelves are a little bigger than I expected, it may even hold 4 more bottles per shelf in a pinch! A total of up to 44 bottles per tray/shelf, or as many as 132 bottles if I filled all 3 shelves with this size glaze bottles. It seems like a great storage option and now my glazes can move to where I am glazing, I won’t have to haul them over individually. Putting this cart together was a good experience. I’m glad I bought this, and would buy it again! Thanks WorkPro!!!

Decent tool cart for the price. The spring loaded handles, the red panels that you depress to pull the drawer open, are poorly spot welded on and one pivot bracket was broken on arrival so I ended up drilling out all of the welds and putting small bolts in to hold the red "handle" panels on. This was a giant pain due to the way the drawers are constructed but it works now and it won't fall apart again. I'd rather have normal handles than the wonky flush mounted spring loaded handles the cart came with. The order of assembly is a bit tricky as well since the same bolts that hold the trays to the legs also hold the end plates that have the tool holders. If you want everything to overlap correctly for maximum strength and rigidity is a bit fiddly to get it all together. Otherwise the cart is sturdy and holds a good quantity of tools. The rubber mats for the trays and the drawer liners seem pretty heavy duty and durable but time will tell.

Well made, easy to assemble tool cart. Using it for my grandsons hand tool storage and organization. Tool boxes fit on bottom shelf. Wrench sets and saw in drawers. Plenty more room for future tools. Boys like the color and look too. Casters are goof with brakes on the one side. Hold it still and steady.

All heavy steel construction very nice. The drawers lock but just push the red handle panel in and take what you want. All in all, a very nice cart.

My wife wanted me to organize the tools in my garage and bought this for me. WOW. This is the best built cart that I have ever owned. It is made with very sturdy materials and heavy duty hardware. The drawer handles are a nice touch along with the nonslip drawer and shelf liners. it has excellent wheels for a cart this size. I can fit all of the tools that I use on a regular basis in it. I did contact customer service about a small issue and they responded quickly and resolved the issue right away. This is a company that cares about their product and customers.

Not the manufactures fault but the box(s) arrived very damaged. The shipper sent 2 carts so mistake there, only paid for one. The instructions are adequate, there is problems with putting the drawers together. Also one shelf arrived damaged but I was able to straighten it out. The drawers stick and do not slide well. My garage is 20+ years old, the floor has settled and the cart likes to runaway, the issue is the locks on the wheels are not easily engaged. It is not worth $240. I am keeping it and will make modifications to use it. The wheels/steering is a chore. all the wheels need to to be free to rotate. Cheers.

Perfect fit and nice design

I bought this cart to create a detailing cart. The features, like the metal pegboards on each side and the size of this cart is what ultimately sold me. Install was quick and easy and the cart seems very solid a well.