Tensea [5+5Pack for Samsung Galaxy Watch Ultra 2025 / Galaxy Watch 7 Ultra 2024 47mm Accessories, Hard PC Bumper/HD Anti-Fog Tempered Glass Protective Film, Face Cover Set for Women Men

UPDATE: Today is September 10th 2023 and I noticed that my black watch case was cracked (I'm not sure how or when it happened) but my watch is fine which is what really matters. The case did its job and I'm glad I had it on my watch. I uploaded two pictures, one showing the crack or I guess it's a split, and the other picture showing I'm now using the silver watch case because I think it looks nice with the black official Samsung fabric watch band. I received this product on August 1st and I liked the looks of the contents but seeing as I was waiting for my preordered Galaxy Watch 6 Classic LTE 47mm in black from my carrier I had to put this product off to the side. On August 7th UPS delivered my Galaxy Watch 6 Classic LTE 47mm and after getting the watch setup and connected to my (preordered) Galaxy S23 Ultra 512gb I immediately opened up the package containing the watch cases and grabbed a black one along with one screen protector and the included suction cup. Screen protector installation: I used a ZEISS glasses cleaner lens wipe that I have to wipe my watch screen clean. Once it was dry (took a few seconds) I inspected the watch face for any dust or lint particles, since I didn't see any I proceeded to getting the screen protector ready to install. I removed the screen protector from the soft white case and grabbed the suction cup and made sure to stick the suction cup on the opposite side of the pull tab that you remove first so you can apply the screen protector to the watch face. I checked again for any dust before I attempted to line up and apply the screen protector. Once I applied the screen protector I pressed down gently for a few seconds and I had to gently use my fingernail to get the suction cup off the screen protector. Once the suction cup was removed I put it back in the box and I noticed a almost have the screen bubble near the top so I gently used my fingernail to lift the edge (at 12 o'clock) and the whole screen protector almost came off so I pressed gently again and had a small bubble that I was able to remove by pressing gently in the middle and sliding my finger outward. I was concerned the adhesive wasn't going to stick but so far the screen protector has stayed in place. Case Installation: The case was easy to install. I started with the button side and once that was seated properly I started pressing on the left side of the case and I heard a nice little click letting me know the case was properly installed. I looked it over to confirm it was installed correctly and I put my new watch on my wrist. The case and screen protector seem of good quality and if either gets scraped up there is more than one in the package so it's worth the investment to keep your watch looking new. I've included two pictures, the first picture shows how the cases protects the bezel and leaves a little of the bezel exposed so you can rotate it. It's worth noting that rotating the bezel isn't as easy with the case on so you may need an additional bezel ring. I don't mind because after installing my case (different brand) on my GW3 LTE 45mm I got used to using the buttons and swiping the screen. The second picture shows how the case protects the physical buttons but it doesn't make the buttons harder to press as the case just makes the buttons sit flush against the case. I'm glad that the case protects the buttons like that because it also protects against an accidental button presses.

This is exactly what I was looking for to protect my watch face as I can be fairly rough with my watches. It was a little nerve wracking putting the screen protector on, and at first there was a bubble near the top of the screen, but over time it went away and fits perfectly with no issue. The plastic part has popped off a couple times doing random activities, but I've been wearing it for a couple months and it has held up super well. It does bulk up the watch a bit, but I quickly got used to it and don't even notice it anymore. Overall it's worth the money, and having different colors to switch between is nice!

I purchased the Tensea [5+5 Pack] Screen Protector for Samsung Galaxy Watch 8 and have been very satisfied with the quality and value. The protectors are clear and thin, preserving the brightness and sharpness of the watch display without affecting touch sensitivity. Installation is straightforward, and I was able to apply them without bubbles or misalignment. The pack includes plenty of extras, so I have spares ready for future use or replacements. Once applied, the protectors stay securely in place and have held up well through daily wear. They resist minor scratches and scuffs effectively, which gives me confidence that the watch face is protected during everyday activities. This 5+5 pack offers excellent value, and the protectors perform exactly as expected. If you want reliable protection for your Galaxy Watch 8 screen with enough extras to last a long time, this set is a solid choice.

These fit my watch perfect. They protect my watch. The plastic feels very cheap, but to my surprise they hold up very well.

Excellent fit. Super easy to install the screen protector and the case snaps on and off, no problem -- but snug enough! Just be aware of the sizes in the product description. I ordered the 44s on accident at first, but the 40s came in very quickly. 100% would recommend.

These watch covers are a perfect fit. The one I wanted was the rose gold one and it was a perfect match lmao my band that I purchased at the same time. I know kno, haha, that because it is so easy to put on that I could order different bands to go with the other colors that came with it. Very nice, would recommend it if your interested in multiple changes in colors.

Great fit ,good protection and great sleek style for the Samsung smartwatch.

These are very inexpensive, so I thought I'd give them a try for my Samsung watch. They are easy to snap on and off to change the look. The alignment was perfect and it does not affect the functions of the watch. I did have some air bubbles under the screen protector, but I was able to rub those out easily and the screen protector has not affected the sensitivity of the touch screen. I've been using the same cover for 3 weeks and it is holding up well. The covers are light and thin, so I don't expect them to last with extended use.