9005/HB3 9006/HB4 Light Bulbs Combo, 100,000LM 1:1 Design 9005 9006 Fog Bulbs with Cooling Fans, Plug-N-Play, Tail Light Lenses, Pack of 4, White

After a relatively simple install, with the biggest pain being the removal of all the obstacles packed into the modern engine bay (2022 Ram 2500 Hemi), I must say I am impressed with these lights. The most noticeable improvement for me was the low beams (OEM highs and lows were halogen/reflector combo). They really cast a wide, bright, full beam. I feel quite confident I'd be able to see kamikaze deer planning their missions along the edge of the road, well in advance now. The brights may need to be cranked downward a bit, as I think the beam may shoot a tad high. Not totally sure yet. I'd read about LED bulbs not being "correct" for reflector housings, but I see no issues whatsoever. Upon finishing the driver side pair of bulbs (Ram 2500 halogen setup has two bulbs per side) at about 6:30 AM, I hit the dark, empty highway I live on, just to compare each side if I could. Definitely saw a difference. My next test subject was an Amish guy who just happened to be coming along in his buggy, so I asked him to see if my lights were annoyingly bright, and if he saw a difference in brightness between the two sides. I approached him from a distance, and he said the driver side was for sure brighter, but not annoying or blinding. And nobody knows artificial lighting like the Amish! Also, I've not been flashed by oncoming traffic since finishing both sides and meeting other traffic in the dark. All good. Anyway, I won't go into detail on the install, other than to say check YouTube. And wear gloves as much as you can. Lots of sharp stuff in my engine bay, and probably yours. Also, I had seen YT videos saying these LED bulbs had to be "clocked" at the 3 and 9 o'clock positions, but that isn't necessarily true. Check the filament orientation of your OEM bulbs before removing them, and see how these compare. It'll probably be the same. That is what gives you proper reflection/beam, or at least darned close.

Excellent led bulbs. I boought this set for my 2011 honda Accord whic is my wifes car. I had previuosly purchased some other brand from Amzon and they were horrible. These lights are veery bright and light up your driving path perfectly. Highly recommended! The size was a perrfect fit. The functionality prefect

Great upgrade, fit my 2016 Scion tC. Very bright and much better visibility over the OEM bulbs.

Easy to install but it depends on your car. Very bright and makes night time driving more enjoyable.

2015 GMC 2500 I'm really happy with these lights. The brights are A LOT brighter and I'm really impressed with them. The lows are brighter but not too bright. Years ago I got some LEDs for another truck and they were too bright. I was getting flashed constantly with my low beams. I thought it was funny at first then I realized I was kind of a d***. These are a good crisp light and are a lot better than stock (if you have a truck like mine, stock are about as effective as a candle in a hurricane) but I don't feel like the lows are blinding anyone and I don't get flashed. Went in easily.. sort of... Not anything to do with the lights themselves, more with getting to them behind the air box. Hopefully they last.

I ordered a set of four (two low, two high) for a 2007 Toyota Corolla. The bulbs came well packaged in a foam-lined box, each labeled with a bulb number. The high and low bulbs are not interchangeable, so this was helpful. There is a small box attached to the control wire for each bulb that needs to be placed near the headlight assembly. Included in the box is a set of double-sided foam tape so you can attach the box to the assembly to keep it out of the way. I had a problem installing the high beam bulbs in my assembly. I had to move the washer from its default position so that it was closer to the base of the bulb to get the bulb to fit in the assembly. Included in the box are replacement washers to be used if the default washers are too small, but that was not my problem. Because I could not see the problem with the assembly installed, I had to remove it, which required removing my front bumper first. That added to the installation time. If I had known what to do with the washer, I would not have needed to remove the bumper/assembly. I would not call this a design flaw – it may be specific to my headlight assembly. Hopefully my experience can save someone else some time and effort. I also had a problem with my daytime running light. As installed, the DRLs flickered. I contacted Sealight, who responded quickly telling me that they are working on a fix for this, but the bulb does not dim without flickering. The solution was to purchase a CANBUS adapter. They gave me the ASIN for the part I needed. It arrived in two days. I had a small problem with that – as delivered, the lights do not power up. You must rotate the power connector to change the polarity. There is no documentation with the adapter. I read about that in another Amazon review. The adapter is another box, so there are now six boxes behind my headlight assembly (one attached to each of the four lights plus two more for the added adapters). I used thermal tape to bind the adapter and the low-beam boxes and placed them. It’s a little crowded behind the assembly, but it works. The downside to this installation is that the DRLs now run at the full brightness of the low-beam lights. It’s not a perfect solution but should be all right. Sealight quickly refunded me the cost of the adapters – great customer service. I now have bright new LED headlights that are a significant improvement over my old, dimming halogen bulbs. The beam pattern is the same as the halogens, though brighter. It doesn’t look like these are too bright for nighttime travel. I am happy with the new bulbs and really pleased with the great customer service I received from Sealight. I highly recommend them.

great product definitely worth the money spent and can finally see at night ! thank you!

Aluzan bien muy fuerte no encandilan al contrario, pero no enfoca la luz se pierde el has de luz no llega muy lejos

Was ordered to use led lights instead of regular bulbs that kept blowing up on a skidoo. It works perfectly. The bulbs are better and cheaper than the ones from the dealer. Husband had no trouble putting this one.

Good value for money and its bright

Fantastic fitment in my Caliber, amazing results over any aftermarket bulb I've tried. Word of advice if installing in a Dodge or Jeep product, invest in the anti flicker resistors , plug and play, takes care of error messages and hyperflicker, but mount them away from plastics as they run very hot. Very Satisfied

They work as advertised! ( For 3 months) I have a 2006 Ram megacab. Tried other cheaper resistors before these and they did nothing! Ordered these plugged them in and my low beams no longer strobe and flicker. Would have given 5 star rating at first if not for The one down side (and premature failure). The plug ends don't hold tightly in place or lock with the factory harness so I ziptied them together. Not 100% happy about that but I do find it understandable given the price point. Great job Sealight