High Torque Cleaner Head Connector Fits for Dyson V10 V11 V15 G5 Vacuum Cleaner,100W V-Ball Cleaner Head Replacement Parts

Very tedious to install. Most of the power head has to be disassembled. It was a great fit and replaced all of the broken pieces.

Not easy to install at all and the lack of any directions or link to any video doesn’t help. I’m a pretty good DIYer and I was able to intuitively tear down the beater head to figure out how to get this piece on but would have really appreciated some directions. I could not find a video out there that showed me step by step how to swap this out. After about an hr to an hr and a half I had successfully got it installed and put the beater back together. We’ll see how the piece holds up. It looks exactly like the original piece but the plastic pieces that break behind the wheels appear to be crafted exactly the same on this piece so we’ll see. Would be nice to have a replacement for this that was reinforced with metal or something so that the same issue doesn’t keep happening. I blame Dyson though for a flaw in their design and not this company.

This is a good replacement product but it is not OEM. the replacement is all ABS and the OEM wheels have a rubberized coat. Once you get over the disassembly and rebuild (30 billion mixed screws #4 torques #1 phillips) the parts work as intended no fitment issues.

The product itself works great and after around 2 hours I had it replaced and working. Yes, 2 hours and I am a DIY expert! This requires a complete disassembly of almost 100% of the whole vacuum head and had to follow 2 videos. EXPERTS ONLY - can do it in an hour probably now but lots of tricks to get electrical wiring inside the head routed.

Worked. But hubby is a mechanical engineer and said he took the whole head apart right down to have to cut and re attach wires. Unfortunately Dyson still doesn’t have the replacement head available for my outsize model. Dyson needs to do better there must be a lot of people with the same issue that the balls come apart. Out of stock.

WARNING, DO NOT BUY! As many otherr wrote, it's a complicated repair but fit it correct. The real problem is that this item is made of cheap plastic, so when using the screw hole, the hole gets stripped and the repair is rendered useless, 1.5h of time wasted.

Main assembly is as good as OEM, however the wheels/bearings are junk. There are several YouTube Videos available to view to replace the main assembly that are very useful. The wheel diameter where the bearing is mounted to the shaft is oversized so that when the crew holding the wheel on is tight, the entire wheel wobbles excessively and does not allow the bearing to do its job. I was able to salvage the OEM wheels/bearings from my broken unit and install on the new main assembly and now my Dyson is as good as new again.

Worked for my v11. Was quite the bear to replace but youtube videos help!