VViViD+ Gloss Metallic Chameleon Blue to Purple Color Shift (1'x5') with Air Release

Recieved the vinyl with deep scratches throughout the whole roll. Its not even usable

I had to cover a piece of Luggage and it actually stuck into it well. My carry on doesnt look battered as hell anymore. I just need wrapping skills but the amount in the roll was just right (and i didnt mess up.) good adhesion and fantastic look.

Used as a golf shaft wrap and it went on smoothly! If you're thinking of doing something similar, here's my process. Cut the vinyl to the proper size. for 45-47" driver, the butt end is 2" wide and the tip is 1.5". I measure the half way point at 1-3/4. Use a piece of painters tape wrapped around the shaft to ensure measurements will fit your shaft. If possible, roll the grip opening up over itself to access the shaft under the grip. Apply the shaft wrap at the butt end first; Centering the wrap with the upper side of the shaft. It doesnt matter that much as the wrap is nearly seamly when applied correctly. Press the wrap down the length of the shaft and back up. Work one side of the shaft till it is laid down smoothly around the back, then the other side in the same manner. Trim and excess from the tip end using a razor or sharp knife. Cut angle towards the ferrule and do not cut into your graphite shaft. If your shaft is steel, you have nothing to worry about on that front. Last thing, IMPORTANT! Make sure there arent any crinkles or bubbles BEFORE applying heat. I used a hair dryer set on high and went up and down the length of the shaft a few times, pressing the wrap firmly as I went around. When youre done, roll the grip back down. Wrap added 8gr to the shaft weight. Wrap does not affect playability or flex.

Used this to wrap the hood on my old beater, worked very well

Beautiful!! Thick, durable, easy to adjust.