Lyman Products Pachmayr 02921 1911 Full Size GM45/C Combat Spl. Signature Rubber 02921

ウエスタンアームズの1911のフレームに合うようにAmazonさんで買った鉛のシートを型取りして切り出して両面テープで裏に貼って使っています。多少は手間はかかるけれど鉛シートで大量生産できるし重量維持できます。グリップ自体は往年のそのままです。見た目と本物のグリップ感触を味わう楽しみのみの自己満足の世界です。

ホールド感、もちろん質も高いラバーグリップ。

東京マルイのガスブローバック M1911A1コルトガバメント用に購入。 カスタマイズ初心者の私でも問題なくポン付けできました。複雑な加工や強い力は不要です。 装着後の握り心地は素晴らしいです。 マルイ純正グリップより少し厚みが増し、ラバーということもあって手のひらへ非常に良くフィットします。 また、このグリップを装着することで銃全体が暗い色になり、美しく引き締まって見えます。 さすが実銃用のグリップです。良い買い物ができました。

マルイMEUに装着しました。 簡単に装着できます。純正のグリップウェイトがなくなる分軽くはなりますが、手に馴染むし軽くなった分、取り回しが楽になるので、サバゲーやシューティングレンジなどで長時間使用するのに最高だと思います。 それに実銃用なので、リアルさは純正グリップとは比べ物になりません。 買って良かったです。

東京マルイMEUピストル用に購入しました。 純正品のグリップを外してポン付けできますが、ネジ穴周辺にバリがあったり、グリップの段付き穴の芯がネジ穴に対し多少ズレたりしていて、ネジ留めした時にネジの頭と穴の間に偏った隙間が出来たりします。 この辺りはMADE IN USAの大らかさを感じる作りです。しかし、純正グリップと比べると握り心地は格段に向上しました。 純正グリップを交換するとウエイトが無くなる分軽くなりますが、純正のままではグリップ寄りにウエイトが集中していてバランスが悪く感じていたのと、軽くなった事で取り回しが楽になったので、個人的にはこちら方が好みです。 東京マルイの純正グリップは非常に精度が良く、且つ美しく、ラバーコーティングの質感も本物を凌駕する出来なのですが、所詮はフェイクなので、作りの粗さも含めてリアルさを求めるなら、実銃のグリップに変更するのがお勧めです。

マルイ製ガバメントにポン付け可能ですが、パネルとパネルを繋ぐ部分のゴムが硬いので取り付けにはそれなりの苦労が必要になります。 後MEUに付属しているパクリマイヤーとは違い文字の部分が膨れておりグリップ感が独特な物になっているので僅かながらグリップ感は太く感じます。

自分のガバメントに取り付けられませんでした。 物は、良かったのですが。

Fit well.. thank you.

Excellent quality product that solves all your standard-frame grip problems. Pachmayr has long since been the authority on aftermarket gun grips -they are the standard that all other grips are judged on, and if you order this for your Government or Commander-sized 1911, you'll immediately see why. As you can imagine, these are easy to install. Quality construction and intelligent design means you got a functional part that enhances the weapon system in a meaningful way. In addition to the functional enhancement these grips add to your 1911, you get some extras on the side -they're made right here in the USA and they give your 1911 a serious look. Beyond that, this is the famously-chosen grip of the United States Marine Corps for their M45 pistols before they picked up a modern contract with Colt to make the M45A1. The original "Frankensteined" M45s are still in service in a decent quantity, so even to this day you'll see MARSOC guys running Pachmayrs on their M45s. Bottom line, this is an outstanding, reliable, and inexpensive way of adding quality front-strap grip on your bare 1911 frame. Things to Consider: As a reminder, you definitely want to coat your frame in oil or preferably grease before installing these grips on your gun. Many people just throw them on the gun, only to find out years later when they remove them that rust has built up under the grips. It rains, there's water, and you sweat on your carry gun -throw some grease under this grip and you're set. Be cautioned, this grip has a little weight to it and adds a little thickness onto the grip profile. This won't be a big deal if you're used to the standard grips, but if you're going from slim grips to this, you'll not only need new bushings and screws, but you'll have to get used to it. As with any rubber-textured grips, this will grip and hang on t-shirts if you're putting this on a carry gun. I will say that it's really not as bad with this as some others I've seen, but that's always a consideration for any carry gun having rubberized grips. Just throw it in the cart already, you won't regret it.

As a weekly range visitor, over the years I have installed Pachmayr grips on several pistols. I bought these for a standard size M1911 frame, 9mm Rock Island Armory pistol to replace the factory smooth wood grips. This is a one-piece, wrap-around rubber grip, providing positive hand control on the front and sides when firing. It took a little patience to install, but eventually it snapped into place perfectly. Resist the temptation to lever the grips into place with a tool, which might damage the rubber. I snapped one side in completely, then tried to stretch the other side into place. It took several tries and even switching the starting side from left to right, but after a few minutes, it just popped right in and allowed the original grip screws to be reinstalled. I suspect that handling the grip loosened up the rubber just by hand-heat transfer. Nonetheless, once installed, the grip fits perfectly, looks great and really helped with proper handling on the firing line. Note to M1911 shooters: I have fired both .45 and 9mm M1911's. The 9mm always seems to impart a little more twist in recoil than the .45 ACP. These rubber grips really make a difference over smooth wood.

For myself they are a great item that makes my 1911 more comfortable to use. Bought 2 more pairs for friends after they used mine

Hands-down the best all-around grip for a stock 1911. If you've got a custom 1911 with a front strap already serrated, checkered, or textured, other grips might be better. I'll admit: There's an elegance to simple panels (rather than a wrap-around grip). But for a box-stock 1911, these wrap-around grips without annoying finger grooves are an excellent addition to increase both weapon retention and physical appearance. I built a custom 1911 about 20 years ago and selected these grips for that build. Partly because I didn't want to have to bother paying to serrate or checker the front strap. I no longer have that custom gun, but I recently got back into the 1911 game with a Ruger SR1911. The Pachmayr grips are still a classic. For a little over twenty bucks, these grips still give you most of the benefits of front strap texturing-- without the added cost or permanency of cutting metal. These grips feel good, they look good and the price is right. If the three sets of grips I recently purchased, these are the ones I decided to keep.