Universal TV Stand for 32-60 Inch TVs up to 40 KG(88 lbs), Height Adjustable Table Top Tv Stands, TV Mount Stand with Tempered Glass Base & Cable Management, Max VESA 400x400mm

Ok so I looked through a lot of these stands before buying, and even when I was buying it I was hesitant simply because the negative reviews of this stand would really scare you. However I really couldn't understand some of them or how these negative experiences actually happened without it being down to user error or receiving perhaps a faulty stand. Anyways the first thing I will mention is the size of this stand and how well it copes with the TV I chose to mount on it. There are reviews on here saying this stand will cope with a 50" TV no problem and then others saying it will not or it barely copes with a 42" so don't risk a 50". I can't speak for those who say it will not cope with a 50" because it mounted my 50" no problem and honestly to my pleasant surprise it's very stable and it seems like the stand could cope with more if I am honest. Which is good as it states it can hold a tv's up 55" and hold a weight of 40kg. Anyway, my tv is 50" and weighs about 12kg. I've since bumped into the tv by accident and I can vouch that the stand coped and held the TV nice and securely. Obviously the heavier the tv the less stable. I would say this stand would cope nicely with anything up to 20kg and anything heavier probably is not going to be as secure even if it is capable of more weight. So anyone with a 50" TV, this stand can hold it, and my TV is Vesa 200mm x 200mm mounting holes and again manual states it can mount from 100mm to 400mm so it mounted just fine. Next I would mention the construction of the stand. Having recently built furniture over these last few months where the instructions have left a lot to be worked out in your head as they aren't very clear, I can safely say that the instructions for this stand are the clearest most straight forward instructions I have read in a while. Quite thorough. I put the stand together very easily. So that is the construction side of it. However I will mention this, towards the end, when I needed to mount the TV it all became a bit of a nightmare. Now initially I figured it was the stands fault and I was a bit annoyed at the whole thing. However I realised it wasn't actually anything to do with the stand at all. Realistically trying to handle a 50" TV in general is very awkward and this is basically the most difficult aspect of the mounting process unless you man handle your tv and don't care about touching the screen or anything like that. How I eventually managed the mounting was by setting the TV up on a table, (needed help from another person BTW). I then put the stand on the floor. Then we carried the TV over to the stand and hung it as per instructions. It was awkward to say the least, but once you manage to drop the TV onto the hooks of the stand it is actually able to rest there which allows you to then push the TV from the bottom toward the other hooks and then from there you can put on the stabilizing screws. Once I had put on the screws I was actually able to pickup the TV by the stand and then set it on my TV unit. Picking it I recommend the help of another person depending on size of your TV. However I managed it by myself and was able to move into position. Materials seem good quality, glass is nice and shiny, has little rubber pads that you stick on so it doesn't scrap furniture or what ever is beneath it. There are a good supply of screws to cater for various mounting situations with TV's make sure you pick the right screws. This was easy for me as my TV already had some and I just matched them up. There are little spacers to help you clear cables if you need to, I was able to avoid this as my power cable is recessed and I only needed to press it in a little bit until I got the screw in and bracket fitted which then kept the cable pushed in by itself. I would not have done this is the cable was sticking further out so make sure you use the spacers if you need clearance as you wouldn't want to damage anything. Overall I think it turned out quite well. I thought it was a little high at first as I'm using the lowest height setting since it's already sitting on a tv unit, but now I actually think it's a better height than what I had it originally, probably optimum height actually for the size of the tv. I would recommend this stand, the price is really worth is, but beware, lifting a large TV and manoeuvring it is tricky no matter how great the stand is. If you can do it with your TV flat down it might be easier so long as you have clearance for the stands main base at the bottom.

This is an excellent product, really well manufactured, precise and solid. There is plenty of adjustability to suit a range of placements. The support is made of a high gauge metal, the bolts are high grade, the screw threads well machined and it goes together very well. Very sturdy, clean look - overall very impressed. Only minor downsides are the cable clamps are a bit too small for more than a couple of cables, and the sticker on the laminated glass doesn’t peel off cleanly. You may want a smaller size for the smallest TV sizes but this worked great on a 43” LG TV and would be fine for the much bigger end of the scale. The minor points are not worth dropping from a 5 star rating.

Excellent sturdy stand Easy to to together Screws included were great Can be adjusted and feels very safe to move Good value for money and able to put at eye level on a low to stand Would definitely recommend

I couldn't drill into my wall, so I decided to try this universal table top pedestal TV stand, and it’s been a great solution. It’s sturdy and holds my 55-inch TV with ease, even though it supports up to 40 kg. The height adjustment feature is nice for getting the right viewing angle, and the tempered glass base gives it a clean, modern look. The cable management system is also a handy touch for keeping things tidy. If you can’t wall-mount your TV, this stand is a reliable and sleek alternative.

Surprisingly good quality given the price point. The only slight negative is they apply a very hard to remove sticker that leaves a sticky mess on the top side of the glass telling you it is the top. Sensible option is to place a sticker on the bottom telling you it is the bottom.

I needed to remove a 55 inch TV off the wall but the original legs were too wide for my TV unit. Most universal legs were too long for the unit, but this plate is perfect. It looked like it would be too small to be able to hold my TV, but it is perfect and looks great on the unit. Holds the TV strongly with me being able to move the unit around with the TV and stand still on top. A good buy.

This fitted my Samsung 40" smart tv. Just need to check the max weight and measurement of the vesa on the back mine was 200mm x 200mm. It was straight forward to fit, the instructions were easy to follow. It has 3 height choices also has swivel function so better that the original tv stand which was so flimsy the cat broke it! Hence the need for a replacement. It comes with all the screws and washers you need and an Alun key. You just need a Phillips screwdriver. V good value for money and i like that you can easily change the viewing angle with the swivel function.

On opening, I was mildly concerned by the volume of contents! However, it was very quickly obvious that I would only require a small number of these fixings! They were actually neatly packed in a couple of very well labeled, bubble strips, grouped by fixing size of bolts, washers, spacers etc., most of which not required for the specific TV you are installing. The options provide solutions for a wide variety of TV makes and sizes with their own fixing dimensions - eg dimension of bolt required to attach the fixing plate as well as space between the TV fixing points. Appropriate washers and spacers are include so the stand can be used by different TV designs - such as flat back, curved, and fixings also allow access for cable feeds or to connector points, often lost with less well designed systems. Assembly was very straight forward with well prepared instructions. The only tool required, not supplied, was a cross head screwdriver. My bedroom TV is a lightweight 32” which sits perfectly on the stand and is very stable - even when rotated to each extreme. I am very impressed with all the thought that has gone into the design and packing of this mount - which looks attractive too! It certainly offers a significantly less expensive, more flexible, install than a wall mounted TV.

El paquete viene muy bien organizado con instrucciones y una gran cantidad de opciones para diferentes pantallas, tanto por tamaño como por forma etc. La calidad del soporte es maravillosa, es un metal muy duro y firme, y la base es de un cristal templado muy bonito. Montarlo es sencillo si sigues las instrucciones y no te llevará más de 30m. Tiene un ajuste de lado a lado y carece de ajuste de arriba a abajo. Se puede subir y bajar aunque es necesario sacar y poner el monitor/tv. Sinceramente no veo razón para gastarse más en ninguna otra marca, es perfecto.

Leicht aufzubauen und sieht echt super aus.

Bence parasını sonuna kadar hak ediyor. Lg 42 LA640S marka televizyonum var. Kendi ayağında bence üretim hatası var ve şikayet forumlarında aynı sorunu yaşayanların şikayetleri var. Ben de kendi ayağını alıp tek televizyonda kullanacağıma bu ayağı alarak, bundan sonraki bütün televizyonlarımda kullanmayı daha akıllıca buldum. Fiyat ta daha ucuz. Parçaları küçücük bir kutuya sığdırmışlar. paketleme çok güzel. Ürün çok şık. Eleştiri olarak bence Kurulum kitapçığında kurulum resimleri daha büyük olmalı. İkinci olarak üst vidalama yerinde vidaları fazla sıkarsanız plastik kapağın olduğu yerde ezilme oluyor. Bence içine destek olarak bir parça koysalardı sıkmalara karşı mukavemeti artırmış olurlardı. Çünkü televizyon düşebilir korkusuyla sağlam olsun diye fazla sıkabiliyorsunuz. Kuracak olanların buna dikkat etmesi gerekiyor.

Item arived with a broken package and the items inside are not new. They somehow looked like used or returned item that was sent to us.

Ich habe den TV Standfuß für meinen neuen Sony KD-49XF8096 gekauft, ein 49" LCD Fernseher der ursprünglich einen sehr breiten Standfuß hat. Da ich meinen TV auf meiner PSB Soundplate (54 x 30 cm) stehen habe, brauchte ich eine Lösung die ich mit dem Ständer von PearlGear gefunden habe. Der Standfuß kommt in einem flachen Karton mit allen erforderlichen Materialien (bezieht sich hauptsächlich auf die Schraubenauswahl) und einem Inbusschlüssel, sowie einer Libelle (kleine Wasserwaage)! Man muss lediglich einen 10 Ring- bzw. Gabelschlüssel oder eine 10er Nuss und einen Kreuzschlitz-Schraubendrehen selbst beisteuern. Die Aufbauanleitung ist ok; bisweilen sind die Linien für die Teilebezeichnung nicht eindeutig, aber aus dem Kontext leicht zu ermitteln. Der Aufbau selbst geht je nach handwerklichem Geschick flott und aufgrund der zahlreichen Befestigungsmaterialien ohne böse Überraschung voran. Die Bodenplatte ist eine recht schwere Glasplatte, was den immensen Vorteil hat dass der Schwerpunkt sehr tief liegt und damit der TV sicher stehen kann. Die 4 Gummifüße sind wertig und stabil, selbst mit Fernseher wackelt da nichts. Für die Verschraubung des senkrechten Standrohrs mit der waagrechten TV-Halterung wurden sogar selbstsichernde Muttern beigelegt und die Schraubenlänge passt perfekt, so dass sie hinten nicht elend lang überstehen. Für die Befestigung am TV stehen 7 verschiedene Schraubensätze zur Verfügung, da der Ständer von 27" - 55" passen soll und das auch wird, angesichts der Auswahl. Zudem gibt es 2 verschiedene Dicken an Abstandshülsen, die auch noch doppelt beigelegt sind, so dass man den Abstand Fernseher zur Halterung perfekt einstellen kann. Die Halterung kann in 3 Höhen am Standfuß montiert und zusätzlich in 2 verschiedenen Einstellungen eingehängt werden, so dass man für die Aufstellung auf einem Board, einem Rack oder Schrank ganz sicher die perfekte Anbaulage findet. Für eine Bodenaufstellung ist der Ständer zu niedrig. Der TV ist fest und sicher am Ständer zu befestigen und beides steht absolut stabil. Da wir unser Gerät auf einem kleinen Rollboard stehen haben das wir auch verschieben, ist dieser Aspekt der Wichtigste. Hier überzeugt der Standfuß vollends. Er ist sogar stabiler als der zentrale Standfuß unseres alten 47" Fernsehers, der vorher auf dem Arrangement stand. Mittels der mitgelieferten Libelle, welche am Querträger eingehängt werden kann, kann man das Gerät perfekt waagerecht ausrichten; ein kleines, aber feines Detail . Optisch kann der Ständer ebenso überzeugen, da die gedunkelte Glasplatte einen sehr wertigen und edlen Eindruck macht und die Beschichtung des ovalen Standrohres einwandfrei ist. Verglichen mit dem Originalfuß des Fernsehers eine deutliche optische Aufwertung. Lediglich die Angabe der Größe der Glasplatte stimmt nicht mit der bei mir gelieferten überein. Sie hat keine 42 x 30 cm, und auch keine 28 cm Tiefe wie in einer Antwort gelesen, sondern 40 x 26 cm. Ich weiß nicht, ob es hier Abweichungen in der Fertigung gibt, aber der Stabilität tut das keinen Abbruch. Fazit: ein sehr wertiger und gut verarbeiteter TV Standfuß mit einem weiten Einsatzbereich zu einem sehr günstigen Preis. Eine absolute Empfehlung.