Allparts BP-2005–010 Tremol-No Chrome

This is such a great device! These now go on ALL my tremolo based guitars. - Fixed Bridge: Tighten a couple thumb screws (can be done quickly in between songs on stage) and use as fixed bridge. This can not be underestimated, fixed bridge improves tuning stability and string bend evenly (no lag from tremolo springs). And tuning is faster, no retuning strings multiple times because your spring is stretching because you tuned the other strings. Plus you can retune to drop tunings without changing guitars. Plus it makes it much easier/faster when changing strings, especially changing one string!!!! - Tighten one screw and use as dive only tremolo; (tuning stability) and can be done in seconds in between songs on stage. Also re-tune to drop tunings without having to adjust your tremolo springs. - Use your guitar as a standard floating tremolo by loosening both thumb screws. - This is not a bad thing to me: you will need to leave you back plate off it your plan to change the settings often. if you plan to set it and forget it, you may not have to leave it on. The first version of the Tremol-no stuck out ever so slightly so my back plate wouldn't go back on, but it looks like they have fixed that in this version. Your tone is supposedly better without back plate any way. - You can install yourself. just use common sense when removing springs (read instructions). hold hand over springs to they don't go flying. TIP: you may have to tweak the angle of the arm every so slightly so it moves smoothly. Follow instructions. I had a Suhr guitar that seems to work better/stay in tune when there was a tiny angle to slide arm. A 2nd guitar & 3rd guitar where I didn't need that angle. Follow instructions, listen to hear if slide is rubbing or binding. Also, I had to adjust the tension on my springs afterwards, no big deal (the wood screws)

It keeps the guitar in tune well enough. Before, every time I tuned, say, the 1st string, the 6th string and others down the line were knocked out of tune. Maybe the only thing that works better would be a wood block glued on the back, but that's pretty permanent, and this can be locked totally, or unlocked completely, or locked one direction only so it doesn't go back (or up on the bar). Easy enough to install but it will take 30 minutes or so. The instructions are not very clear so you've got to use your own logic. Backlash and residual play in the shaft will make it unsatisfactory so be sure, after it's all in and done, to screw in the wood screws a tiny amount (like 1/16 of a turn) before twisting down the Allen set screws. This removes backlash. (Don't be stupid and set those set screws first, use your brains.) They sort of explain this but not very well. Whatever you do, in all instances of tightening down, don't over-tighten or you'll break something.

This is a great little product. I primarily got this just to convert my Floyd Rose into a regular stop tailpiece. It is a bit tricky to install, I had a tough time getting the springs back on once I installed but somehow I got it. And once I did, the thing really works good. It's like it's not even a Floyd Rose anymore. I'm able to tune to anything whenever. The strings stay in tune very well too. I can't speak for using the knob to switch from tremelo to non-tremelo because that was not my purpose for this. But It does look and feel a little flimsy for that. I'm not sure that will hold up for that long switching back and forth with that. But like I said, I can't speak on that. Anyway, this is a great product. I like it and recommend it. Not bad price either. Works great. My only downfall is the install is a little tricky without the proper tools.

It actually performs like it says on the videos. However, I could no longer put the back cover of my Charvel San Dimas. The knobs also somehow grabs on to my jeans when I play standing. This is good if you want to lock your FR trem. Kinda looks cool than the standard spring hooks. It could also function as a down only lock for the trem, but whats the point of a floyd rose if you cant make it scream? It takes the fun out of it. So I'm not sure if its good or bad. I still kept it just in case I need it...I haven't used it since I installed it.

Installation can take some time but nothing too complicated. Works exactly as intended, haven’t had any issues so far (~1 month of usage). Even comes with a few spare screws and whatnot in case anything breaks!

I installed it by their videos. Quite expensive for doing something a Jenga block can do for a lot less. Installed it and about a week later went to play my Schecter Damien with Floating Tremolo and the pin broke allowing the tremolo to snap forward. I had to change the strings as they never sounded the same again. I was able to rig the device and still get it to work. But not worth it. Buy a block stacking game and use one from the game.

If you are going to lock your tremolo this is the best and most reliable method of doing so. There are several makeshift ways to do the same thing but if you have a quality instrument plus you don’t want to alter the resonance of the instrument this is the best method to do do

What a great product this is! I can’t for my life use a Floyd rose type of tremolo, I don’t wail I’m guitars and have zero need for one. Unfortunately my new guitar came with a tremolo and it was impossible to keep it operational the way I wanted it without fidgeting constantly with it. The tremolNO fixed all those issues without making me furious. The bridge is now a hard tail in the least labor intensive possible manner. I love it! Thank you! It’s made my life ten times easier with this beautiful guitar

Se ben montato e settato é una delle soluzioni perfette per rendere il vostro ponte flottante, fissi

Here's the thing. This works great, at least for a while. However the screw locking parts are quite small and they seem to work loose with the natural vibration of the guitar, so at some point you will find yourself hunting one or more of them down. The same goes for the locking attachment to the block, the very tiny screw came loose and the whole assembly fell apart. As a consequence of this the mechanism has developed a tiny bit of slop in the hinge joint, which means the hinge vibrates when you play and that is transferred to the strings, so the strings vibrate, VERY noticeably. With a more secure means of locking the thing down as required this would have been great. Removed and wont be replacing.

Great product, top quality. it was easiest to install with the strings attached if your 2 point system tends to fall loose. Also having the strings on balances the spring tension while installing. Directions and procedures to install on all types of trees would be helpful.

持っているギターは、ガスリーモデルでもこの Tremol-No がついてないものでしたが、後付けで付けました。ダウンオンリー、フィックスと出来る様に。弦交換が楽になりますね。

This fits perfectly my Original Floyd Rose tremolo and keeps the Bridge in tune. It gives the option to completely lock the bridge or but it in dive mode only locking only one direction of travel. I recommend to use 4 springs on the back.