Adjustable Monitor Stand, Single Arm Desk Mount for 32 inch Screen and 17 inch Laptop, Heavy Duty Ergonomic Bracket Holds 22lbs

Pros: Very sturdy, well made, easy to assemble and install with instructions (took me 20 mins or so), very easy to adjust horizontally (I did have to lightly loosen a few joints...but not by much). If using for a monitor, you can easily rotate from landscape to portrait position and tilt back and forward. Cons: Once you choose a height for the "arm"...you need to use an allen wrench (handily placed on the pole) to adjust it. The arms only articulate on a horizontal plane...meaning you can't adjust the monitor/laptop stand up and down except by changing the height on the pole with the allen wrench. The middle joint on the "arm" has limited range of movement, perhaps a bit less than 90 degrees, so you can't push the monitor all the back toward the pole if it is bent (I'd say I got it about 4" from the pole but only by placing the joint on the pole so it starts as if it's coming out toward the back.) I will add pictures to this review soon to demonstrate my comments above. Overall, a great solution for what I wanted. I had two monitors on my standing desk, and we just got laptops. For a while, I'm using the laptop separately from my dual monitor desktop (possibly forever). There was no room on my standing desk for the laptop, so this device gave me a stand for that as well as replaced the monitor stand that took up room on the standing desk. I was initially concerned about all of this weight on my thin 1/2" likely particle board desktop, but found that the metal framework for the moving part of the desk ran the full length of the desk at the back and front. The clamp is closed on that metal bracket, reinforcing the desktop material without the need to add anything. I was planning to add a 6" x 3" x1/2" pieces of wood to the top and bottom of the desktop when clamping it in place to reinforce and redistribute weight a bit initially, and would still recommend that for thin or glass desktops...but I got lucky and didn't have to. My expectations for more arm movement was likely based on a wall bracket I have for a tv at home that permits it to fold nearly flat to the wall. It is an offset arm at the middle joint. I didn't pay attention to that when looking for a laptop/monitor solution. That said, it does what I need it to do. If you need it to sit almost flat to the back of the desk in any position other than full arm extended out to the side, this won't do that. Also, if you have two monitors on this stand, they can not be on the same level. One will be higher than the other. Overall, for the price...a great and sturdy little set-up. No complaints on my part!

I was looking for some options to expand on the functionality of my computer desk. I have an IKEA Fredde desk and recently I saw IKEA sold clamp-on shelf attachments for tables or desks. This had me wondering what else is out there. This is when I came across this product. I had chosen it because unlike many other options that seemed either more focused on dual screen setups this product was designed for a screen and laptop or tablet. This is perfect for my purposes as it would free up space formerly taken up by a monitor, as well as that of a laptop or keyboard. My intended use was for having a setup ideal for plugging in multiple inputs to a monitor while I can also work on the desk. I have a retro computer workstation and use a small multipurpose television so I can plug in HDMI, VGA, RCA, and RF all running to various computers. So to lift the monitor off the desk is great as it frees up space, makes accessing ports easier, and with the flexibility of the neck on this product I can move the monitor up, down or swivel it out of the way if I am using the desk for other purposes. The attachment to screw in a television or monitor is great. I also like the laptop holder. It is a tray that can be angled and is large enough to hold pretty much any size laptop or tablet. Again, this is nice because it frees up so much space. If you don’t intend on using a laptop, this could also be perfect for holding something else like a small gaming console, drum machines or synthesizers, or even just papers. If you don’t want to do any of that one cool thing I noticed is that the laptop tray attaches using the same bracket that is used for monitors and TVs, so you could wire up a couple monitors on top of each other and have a dual monitor setup if so desired. Another really cool option that I was unaware of when I purchased this was that in addition to the clamp-on option, this also has a stationary option where if your desk has a grommet you can attach the the main pole to the desk. The grommet size would have to be large enough, or if you are crafty you could use a hole saw attachment and drill your own but I would much rather use the clamp, as it is very sturdy, which leads me to my final point - the construction. This product arrived in a very organized box. When opened there were two a couple boxes and the laptop try neatly organized. When I opened everything all up everything was bagged and all the tiny bits (screws, nuts, hex wrenches) were all in a labeled bag with letters that correspond to the instructions The instructions were also very well written and detailed, which was something I did not expect. I think my only complaint (which isn’t really a complaint) was that the optional grommet build was in a separate box on the second page but both were visible when I had the instructions opened. I just did not see it at first and it did not impact my desired use but was nice knowing I could in the future, especially if I buy a new desk. The product also feels very high quality. Everything feels sturdy. The clamp, main pole, and even the necks feel heavy and thick. They are all metal and have thick metal screws that tighten with a hex wrench so you can keep things still. No plastic clamps or screws so risk of stripping or breakage seems far less likely and since they are standard sized metal screws, I suppose you could buy replacements at a hardware store. The only construction part I kind of questioned was when attaching the clamp together, it uses three screws but no but to secure them but I don’t see this as being an issue - the screws tighten very well and don’t feel like they are going anywhere. Overall this product is the best deal you could want from something like this. It doesn’t feel like the pieces will slide and flop around once you have it setup and the metal parts are nice and strong so no worry they will bend or break. While I am using an older television with this, newer monitors and TVs have gotten so light that I imagine you could use this with a pretty large screen. If I ever needed a dual or quad screen setup, this would definitely be an option. I almost forgot to mention cable management. This product also has plastic clips that go on the arms and tools to not only attach cables but it also has spots to store the hex wrenches for future adjustments. I did experience an issue with the monitor and tray tilting forward, even when no added weight was added. While the instructions just mention to tighten a bolt, it still tilted heavily so I removed the bolt to reveal there are two washers on either side of the mount. Each washer has two small indentations that line up with two holes on the mount. On the inside of the mount there is a plastic piece that has multiple holes. It looks as if this is to line up with the indentations and when you tighten the bolt they keep the monitor in place. What I had noticed was that they were not big enough and so the mount would move regardless of position. I tested with removing the two washers and instead wrapping a paper lip through the holes at the desired position to prevent the plastic piece from moving. When I reassembled the mount it worked and the monitor stayed in place.

Great product for the price. Cheaper than many others like it, well worth it. But, only 4 stars because my monitor tends to fall down because its to heavy I guess. It is not that large (25ish) and the product says up to 32 in. I had to zip tie it like crazy to keep it up. I will eventually buy some small bolts and nuts to stick through the tiny holes behind the tilt. That should keep it in place a little better. There was some extra screws/bolts that came with it but I think they are to help accomodate a bunch of different monitor mounting sizes. I tried them but they did not fit anyways. The post is pretty sturdy. I added some wood under the desk to stiffen it up a bit. Worked great. Was also able to mount my laptop cooling base to the arm. Looks like it belongs. Installation was pretty easy, instructions are more thorough than I expected which was nice. If you are a little mechanically inclined treat this like the base and work off it to make it exactly what you want. I definetly recommend this because its significantly upgraded my setup. If you have a very light weight monitor its 5 stars.

With a 17 inch laptop and a 27 inch monitor, this was exactly what I needed. Very sturdy. Not difficult to put together.

This is awesome. It's perfect for what I needed. It's sturdy, easy to put together and does exactly what I was looking for. It holds my 27-in curved LG gaming monitor and my gaming laptop just fine. I am so happy with this. Totally worth the money, highly recommend 100% of the time to anyone. If I could give it 10 Stars, I would. Great product.

Got what expected!!!

Ho acquistato questo supporto per organizzare meglio la mia postazione di lavoro domestica, preso atto del fatto che d'ora in poi passerò probabilmente più tempo qui che in ufficio... Ho raggiunto pienamente lo scopo con questo dispositivo di buona qualità, realizzato totalmente in metallo e verniciato piuttosto bene in nero opaco. Le parti sono ben congegnate e realizzate con cura: ne risulta un montaggio piuttosto agevole, supportato da istruzioni sufficienti allo scopo. Si può vincolare alla scrivania sia mediante un morsetto, solido e ben dimensionato al peso che deve sostenere, sia mediante una piastra circolare dotata di vite passante, da utilizzare forando il piano di lavoro. Ho usato il morsetto in prima battuta ma non escludo di usare in seguito la piastra una volta certo del posizionamento del supporto. Su questo ho installato monitor e PC portatile; quest'ultimo sull'apposito vassoio, come si vede nella foto. Il vassoio è vincolato a uno dei due bracci del supporto, identici, mediante una staffa a standard VESA, uguale a quella destinata a fissare il monitor sull'altro braccio. Ne deriva che sarebbe possibile installare anche due monitor affiancati, pur se non alla stessa altezza in quanto i due bracci sono innestati sul tubo centrale sovrapposti, in modo da risultare su quote diverse rispetto al piano della scrivania. Grazie a questo supporto ho potuto dotarmi di un nuovo monitor, più grande e performante di quello che usavo in precedenza, posizionandolo alla giusta distanza grazie al braccio articolato: gli occhi ringraziano e inoltre ho raddoppiato lo spazio disponibile sul piano di lavoro.

Na pierwszy rzut oka wygląda solidnie. Instrukcja jest dobrze napisana, a samo składanie proste. Z wykonaniem już gorzej. Gwint jednego z ramion był uszkodzony i nie trzymał. Nie przykręcilem śruby nawet raz, więc nie miałem jak uszkodzić, po prostu gwint nie łapie. Użyłem dłuższej śruby i dokręciłem nakrętką z drugiej strony, bo nie chciało mi się odsyłać towaru na reklamację. Druga sprawa to regulacja. Całe ramię wygina się delikatnie pod wpływem ciężaru monitora 27", a na uchwycie nie ma śrub regulacyjnych (jakie na przykład są w uchwytach do telewizorów) do wypoziomowania. Monitor więc pochyla się na bok. Instrukcja mówi o regulowaniu poziomu śrubami na zawiasach ramienia ale to działa minimalnie. Natomiast samo mocowanie VESA ma luzy na połączeniu z ramieniem, nawet po dokręceniu śruby mocującej. Po włożeniu w luz metalowej podkładki udało mi się poprawić sytuację do pewnego stopnia ale idealnie nie jest. Uszkodzony gwint to może mój pech ale brak możliwości sanoswnej regulacji poziomu to już problem konstrukcyjny, podobnie jak luzy. Polecam używać lepszego klucza imbusowego niż ten w zestawie, bo śruby są miękkie i łatwo je uszkodzić. Na plus solidne mocowanie do blatu i dobrze wentylowana podstawka laptopa. Podsumowując szału nie ma ale narazie zostawiam.

Took me a while to set up but all in all its good

المميزات :- ١- السعر جيد جدا وغير مبالغ فيه ٢٠٠٠ ج.م ٢- مواد تصنيع جيدا جدا وتتحمل أوزان اللابتوب والشاشة ٣- سهولة التركيب ووجود كتيب تعليمات ٤- عدم إلزامية تركيب كل القطع مرة واحدة .... تقدر تركب دراع واحد فقط لو كنت محتاج شاشة واحدة أو تركيب الدراعين لو محتاج شاشتين أو شاشة وللابتوب الملاحظات :- ١- قاعدة اللابتوب الموجودة بالصورة في إعلان المنتج غير اللي جتلي في العلبة ( ولكن الأمور تمام )