Ravensburger Puzzle Conserver 17954 - Premium Puzzle Glue | Enhanced Glossy Finish | Perfect for 500-1000 Piece Puzzles | Ideal Puzzle Accessory

This product works. How do I know? 1. Puzzle is assembled 2. Puzzle conserver glue is liberally applied 3. Glue dries 4. The kid’s cat takes a nap on puzzle 5. Something startles the cat 6. Cat freaks out and bolts 7. Puzzle flies off the table 8. Puzzle hits the wall 9. Puzzle lands on floor in a balled up heap It held. Seriously. Not a single piece separated. We just picked it up, flattened it out, and that was that. So yeah…this stuff is great. Cats? Not so much.

Me llego todo bien, excelente producto para lo que necesito

My bottle must have been defective. I would only get very little to come out with pumping, which was not enough to fill any gaps. I can hear a lot of liquid in the bottle but sadly barely anything releases on pump. I have tried several coatings with this despite the circumstances and the puzzle never stuck. I originally assumed that perhaps a 2000 piece puzzle might be too weighty of the strength pf the glue but I know realize the issue was just the amount of glue in general. I might look into opening the bottle myself and scraping small coats on without ruining the puzzle

I was cautious about ordering this. I had never glued puzzles before. I did a lot of research about this and other products before ordering. I really wanted to save the butterfly puzzle and hang it up, so I tried this as it looked pretty simple. It was very simple! You have to make sure to rinse the sponge after each use. She. You are doing the front, it's hard to see where you have done already. However, there is a wet looking glisten to watch for. Once you get the hang of it, it's extremely easy. It works great! Even on my son's Angry Bird puzzles which are really thick. I wasn't sure it would work on them, but it did. I will keep this on hand for all our puzzles! I recommend this to anyone. Especially with kids, it's so easy they can do it. Please supervise them though.

I bought this to make a 24" x 18" puzzle stick together long enough for framing. I'm on my fourth coat, going very carefully to ensure the entire surface is covered in the product. I am following the few directions on the bottle...but the adhesive effect is very, very light. I'm not sure if I'm doing wrong, but the only instructions appear to be the four panel picture on the bottle and some basic shake before and clean after instructions in text form. It does dry clear, to its credit. I just wish it behaved better than a liquified, diluted school glue stick.

I love that the bottle has a foam applicator that makes the gluing process a breeze. The glue is a faint white, but turns clear by the time it is dry. I recommend applying 2-3 coats, depending on the size of the puzzle. I had to apply three coats to a 1000 piece Ravensburger, but this was primarily because the first couple of times I didn't really squeeze out enough glue -- it really works best if applied generously (you obviously don't want to SOAK the puzzle, but simply running the bottle back and forth without squeezing the bottle much will likely be insufficient). And like other reviewers said, be sure to place something underneath the puzzle (I slipped in some wax paper) and to also rinse the foam applicator with water after each coat application. As to the end result, the puzzle was glued strongly enough to be transferred to a frame (I used a 32 x 24 frame made by ArtToFrames, along with their 32 x 24 mat, which has an opening approximately equal to the puzzle's dimsensions). There were a couple pieces that I had to push in after the transfer. Since the frame has a glass front, I am not worried about the puzzle falling apart. I wouldn't trust the puzzle to hold together without proper framing, though. I guess there may be stronger glues out there, but I really wanted something gentle and neat for my puzzles. This glue fulfilled that need.

It is glue with a sponge top. I went over the face of my puzzle multiple times because I didn't adequately get it down all the cracks. Does not damage the surface. Also tried it on the back but surface was too porous. I could definitely do more than one puzzle with one bottle.

First time I did a 1500 puzzle and it took 3 coats. Even then I wasn't sure it was solid. Then did a 1000 piece and it was perfect with 1 coat! First time I was just gliding a liberal amount over the entire puzzle. Second time I went row by row and put a liberal amount over each joint where 2 pieces met. And watched that an amount of white glue got between each two pieces. Waited 2 hours and perfect! May put duct tape on back again just to be sure before hanging. Have maybe 1/4 bottle left for next puzzle.

Does well, the applicator is good and easy to use but find that puzzle needs more than one coat to completely stick together.

Ich habe die letzten Wochen 8-9 Puzzle gemacht. Von 1.000 bis 3.000 pcs- Gerade mache ich viel Disney von TREFL, Ravensburger und vor allem Thomas Kinkade von Schmidt. Der glue and go ist super, funktioniert super leicht und klebt einfach genial. Gerade die Schmidt Puzzle von Thomas Kinkade bekommen so einen schönen Glanz. Man merkt dass der glue and go aber für Ravensburger Puzzle ausgelegt ist. Da funktioniert er am besten, Schmidtpuzzle auch super. Aber bei TREFL, da merkt man die Qualitätsunterschiede der Puzzle. TREFL zieht extrem viel Kleber und Feuchtigkeit, dadurch muss man a) viel benutzen damit es die Fugen füllt und vorsichtig sein, man muss 3-4 mal drüber gehen bis es wirklich fest sitzt, und kann nicht zu viel auf einmal nutzen da sich sonst der Druck vom Puzzleteil löst. Das problem hat man bei Ravensburger und schmidt Puzzle absolut gar nicht.

.

Sí pega muy bien, pero sí hay que dar varias pasadas, ya que con una o dos se fragmenta. Con cuatro pasadas quedó muy bien.

Not sure where or how the negative comments originate from, but this product works really well. Not to offend anyone, but if you find this product not working, then you are not using it correctly. After some hesitation on my own from reading the negatives, I ordered it to try for my self. I found that it worked without a flaw and it was as advertised. I squeezed the bottle properly and somewhat consistently so that there was a good flow coming out onto the puzzle. I looked for it being a steady white liquid appearing on the puzzle surface. I worked the liquid into the puzzle pieces with a smooth circular motion so the cracks would get filled. After that I gently brushed the surface with a vertical path back and forth the entire length of the puzzle to eliminate any stroke marks or uneven spots. It dried to the touch in about half an hour and then the next morning I found it for the most part dry. Maybe a little tacky in some spots but by the end of the day it was 100% dry. I put two coats onto the puzzle and I must say that it looks great. The puzzle is 42 inches tall and I was able to stand it up as one piece. This stuff works great. It goes on super easy. I've done two coats on this large puzzle of nearly 1100 pieces and then another1000 piece with one coat. There is still a good amount in the bottle. Without a doubt, I will buy this again. It will be my go to product for puzzles.