Goldwood Sound GW-6024 Rubber Surround 6.5" Woofer 170 Watts 4ohm Replacement Speaker, Black

This speaker sounds great and is a good value. As other reviews mentioned, the terminals are pointed in the wrong direction. I used some pliers and bent them out, allowing me to use spade conectors. Also, as others have mentioned, the holes don't seem to be quite standard. I had to drill the speaker holes out to fit the holes in my kick panels that worked for both Hertz and Pioneer speakers. Overall all they're good speakers, but be prepared for some possible necessary modifications.

I have a HIGH powered, 11 channel stereo in my Chevy Tahoe. The one issue that continually irked me is the fact that I would fry a set of mid-bass drivers in all 4 doors roughly every 12-18 months. The car stereo speakers, which are VERY high end with a high-end price simply cannot hold up to the continual "pounding" the receive as I drive with my stereo on, quite loud, ALL of the time! I am a HUGE audiophile and LIVE for music! The magnets on these instantly impress as they're massive compared to the magnets on the Focal speakers these are replacing. The sound response is superior as well, with more bass, more volume and equal clarity as the Focal speakers that cost 10x as much! I know these were not designed as a car audio speaker, but let me tell you, MAN do they do the trick! These are being driven with 75w each and they handle it with ease. They do not distort, do not break up and the bass response is incredible for a mid-bass driver! I've been doing higher end car stereo for myself and select customers for 30 years. I wish I would had ventured outside of the car audio marketplace much sooner as these are vastly superior to ANY 6.5" speaker I have EVER installed in a vehicle! IF installing in a vehicle, MAKE SURE you have space for the windows as these magnets are much larger than all car audio speakers I've ever installed. I highly recommend these. WHAT A "BANG" for the buck!!! Kirk

Sound was good. Replaced an old Advent speaker.

My subwoofer foam tore up so instead of paying 22 bucks for the foam and glue to replace it, I bought this instead. Super easy to install, and should take no more than 10 minutes. Just remove the grill with a flathead then unscrew the 4 screws on the speaker. You have to bend the terminals to a 45-degree angle so you'll need some pliers. The left lead fits perfectly but the right side is smaller so you'll need some pliers to widen it. I used 2 pliers, one to hold it while I used the other to pry it wider. I then slipped it onto the terminal as normal and it's a nice tight fit and won't budge. It screws into the same holes perfectly too. The woofer sounds really good. I think it's louder than the original Klipsch but as some others noted, you need to play music through it for a couple hours and it will sound better. On fast sharp sharp-hitting bass notes, it feels punchier but on the deep drawn-out bass hits, it's not as smooth and you can notice a slight rattle. Should be more durable than the Klipsch since the core is made of plastic and the "foam ring" is made of rubber.

Good sounding for a great price. I used these to replace the 6.5 woofers out of a Klipsch Promedia v.2-400. They have the same response frequencies as the original woofers, but can handle more power as they are 8ohm instead of the originals' 6ohm. Allegedly, you have to run the speakers for a 2 week brack in. I did not seem to need to as they sounded great out of the box. If you use these to replace your Klipsh speakers, please note: You will need to trim the black wire end to fit the connection. Renewed the life of a 25 year old 4.1 surround speaker set.

This was bought to replace the subwoofer that came in my Klipsch THX computer sound system. The original speaker was paper with foam around the edges, and it just disintegrated into pieces but the regular speakers for the vocals are still great. I know that this is common on most cheap subwoofers, but I was expecting something a little better coming from Klipsch. The overall fit was excellent, and the screw holes lined up perfectly. The original speaker grill doesn't fit but if you remove the trim ring from the old subwoofer, you can get the grill to fit. The sound quality from this subwoofer is amazing and the materials the sub is made out of is by far superior to the original.

I looked at so many different speakers. Not sure which one would be a good replacement for my Klipsch subwoofer that disintegrated. This speaker sounds amazing. Takes a few hours to get broken in but I think it sounds even better than the original. Good Rating for whats needed. One thing to note is you will need a new plug thing for the negative terminal since its larger than the orignal. Then you may need to bend the plugs to get it to fit inside the sub without touching the wood. Extremely happy overall. Its crisp, loud, has good range and response. Highly recommend!

The specs of the goodman woofer are very similar to the Klipch promedia 2.1 v1 subwoofer ( bit lower in bass). Fits perfect in the Klipch 2.1 promedia sub. The Goodman has noticeable better low octave response than the Klipch sub. A bass low notes are clear and precise with the Goodman. The higher freq response is also great as with an external amp you can set the crossover higher to help the bass in the small satellite speakers. Highly recommend this woofer as an upgrade to the Klipch sub.

Hat genau gepasst und die Anlage funktioniert wieder Super

Bien

Very good product which is what I expected. I had a Polk Audio RTI A3 in which the driver was blown. The local service center Sharaf DG in Times Square Mall simply said they cannot replace the driver from RTI A3. On a good google search thanks to Amazon.ae, I found out this driver GW-6028 from Goldwood which is 95% matching with the performance of the original driver which would have been also a OEM from any China make. This Goldwood GW-6028 fitted exactly into the circular slot provided in the wooden cabinet and it was easy to fix. Only suggestion to Goldwood would be "Why not you guys mark + / - terminals in your speaker". I had to buy a 9V battery to check the positive terminal. Its an additional expense for me. Can I sue Goldwood for that hahahaha. Otherwise, the performance is amazing and I am satisfied.

Replaced soundbar system’s subwoofer speaker. Works very well.