QC3.0+5V 3A Dual USB Power Socket, Quick Charge Car Charger USB Adapter for Smart Phone PDA Android GPS Use for Toyota

Beautiful soft green LEDs behind the charger look great. They're not overly bright either, they're a level of brightness that lets you see them but doesn't blind you in the dead of night. They connected in a virtually self-explanatory way to the cigarette lighter of my 2009 RAV4 and the fit was perfect. The AUX/USB port beside it is fairly loose, and it won't come out if it's pulled, but it feels cheap. This quick charge port fits a LOT tighter, and I'm extremely happy with this product. For about the same price as a charger that would plug in, this is a permanent solution that frees up your lighter socket for a large power inverter. I needed this ability since I wanted to power my laptop when I'll be "working from home" in my car while we are moving.

This item was used to add usb ports in a 2018 Tundra in an unused factory mounting location. For the install: The factory wiring harness was cut off as it did not interface with either existing connector. I opted to solder to 14g wire and connect directly to fuse box with a 5v low profile mini add a fuse on an open slot that turns on in the accessory position. The item clicks into the unused slot at botton of dash with no wiggle, very secure. No modification needed. The product: The green usb port illumination is not overly bright, mainly due to mounting location and easy to use. Time will tell how long the product will last, but seems pretty solid for the two weeks I've been using it. The item looks very much OEM when installed correctly.

I have a 2019 Limited and TRD OR. I used two of these in each 4Runner to add a total of 4 USB ports. These are pretty easy to install, it's very nice they can connect to the car with out cutting into any wires. I soldered both together to feed off of one 12V power port (cigarette lighter port). You just disconnect the trucks wiring at the very back of the trucks power port and connect the USB plug's wiring harness then reconnect the UBS wiring harness to the power port (like a pass through), perfect with zero cutting of the factory wire or needed to wire anything to the fuse box. My first 4Runner I connected to the power port in the center console storage compartment - this was a bit of a pain because it so tight and hard to remove the factory connector and with one hand connect everything up. The second 4Runner I connected to the power port under the stereo next the factory USB port, it's a little bit more involved from taking the 4Runner apart but much easier to hook up everything. As you can see in the pictures this looks very factory, the USB ports fit very well and nice and snug in the factory openings. The green LED's aren't overly bright at night. Overall I am very satisfied.

Product fit in 2011 Tacoma, but would not connect to the 12V connector. Ultimately I had to buy T-tap terminals to splice the connections. Easy to do, just took extra materials. Hardest part is getting access to the install location below the AC controls. I also "turned off" the green LED by cutting into the side of the housing with a razor blade and breaking the LED connections with a small screw driver. I then covered the hole with some electrical tape. Ultimately installation was more involved than I hoped, but the end result is great.

I got the dual usb-A version with QC3 and the green lights. One thing no one seems to mention about this is that these are usb-A but you can plug your cord in both ways! I've seen flimsy iterations of the bi-directional usb-A but this one actually seems sturdy enough to last. The slight increase in port thickness is hardly noticable so I suspect many users assume you can only plug your cord in 1 way and call it a day. Both ports output 18w (9v/2a). Fit was a little snug in my 2019 Corolla LE and required a little extra pressure to fit into my empty socket. Installation was simple with a few YouTube videos on how to remove the trim. Green LED is not bright enough to be annoying but it really doesn't light up anything but the inside on the port. If I don't update this, it means the port is still working.