1200 Case With Foam (Black)

I bought a 1200 in orange for my two GoPro cameras and assorted mounts (see uploaded pictures). The 1200 is the perfect size (depth) to fit a GoPro camera on its side; you would likely waste a lot of space under the camera if you mounted it on its back. The case is the perfect size for my use (a Hero 3+, an original Hero HD, one BacPac, WiFi remote, spare adhesive mounts, spare backdoors, suction cup mount, handlebar mount, and assorted mount extensions / pivots. If I get any more mounts or another BacPac I will have trouble fitting it all in this case. The case itself is great build quality and feels very sturdy (just like every Pelican case I've used). The latches take significant effort to open, but that means they'll be less likely to pop open on accident. I would not hesitate to buy another Pelican case should I outgrow this one or need another one for other items. I chose to go with a Pelican case rather than a soft case because I've used Pelican cases before at work and in person life and have always been impressed with their ability to protect sensitive contents, even when used as checked luggage. Based on this past experience, I knew it could easily protect my cameras in the trunk of my car. I went with orange so if I'm trying to find this at night after a long day I could easily spot it.

I've flown with this four times in my checked bag. I bought two TSA approved locks and have had no issues. The case holds up to flight and is well made. It stored my Glock 20 with 2 magazines and 40 rounds of ammunition no issue. Pelican is a name brand and they make quality products.

First of all, these cases are very well built and seem as though they will be able to withstand a serious amount of abuse. The pick and pluck foam is great for customizing the interior. I purchased (2) of these cases to protect my camera & lenses from humidity. I purchased this particular size Pelican case because it fits perfectly in the cabinet where I store the rest of my gear. I initially bought (2) of these cases and assumed that they would fit: (A.) 5diii body (B.) 100mm F2.8 ii (C.) 135mm F2 (D.) 50mm F1.2 (E.) 24mm F1.4 ii Close but not quite! The biggest issue is the camera body. (Pics attached) It's not possible to close the case with the camera sitting upright (not even remotely close) so I have to detach the lens and lay it face down. With the camera orientated in that particular way, it's not possible for me to fit another lens in one case. The solution to this problem is simply purchasing a third case which I don't mind doing since they are of a fantastic quality and great price. FYI - my 50mm, 135mm & 24mm do fit all in 1 case however it is pretty tight but doable. (Pic attached) Once I receive my 3rd case I'll have the camera body in 1 by itself and 2 lenses paired up in the other cases. Hope this helps any Canon 5D3 user.

If you are unfamiliar with pelican cases let me say they are among the toughest cases available and they offer a lifetime replacement guarntee. Pelican cases will scar and scratch but it does not affect the usability of the case and you generally have to go out of your way to make a scratch in the case. All pelican cases I have used come with a valve that automatically equalizes the air pressure so there flyer friendly and they are water proof, not water resistant, water proof unless you scuba dive or some other crazy thing with them and even then it might hold out for a while. This particular case I use to house a custom pistol and it works well, the interior foam takes a little work to remove but its not a problem. The foam comes out in rectangular pieces that form a grid that you can customize. The bottom, top and sides of the foam are not meant to be removed but the interior foam is completely removable. You can buy other cases and you can buy cheaper cases and certainly there are some metal cases that may ultimately outperform this for a much higher price but for the money this is simply the best. Yes Pelican cases are not cheap so buy them on sale whenever you can but the product is worth every cent of the full price if you buy something else you will almost certainly regret it in short order.

This is a bomber case to survive in the harshest environments. The latches take a bit of force to open, but I feel confident that my gear is safe inside. My primary use has been for the GoPro Hero 3+ with plenty of room for assorted accessories. I use this when the extra protection is needed for my equipment which is certainly not 100% of the time. For those other occasions, I have a POV case for storage or when the extra protection is not needed. I have also purchased a second set of foam inserts that I customized for various DSLR lenses. As another reviewer stated, the case is probably not large enough to provide ample padding for a DSLR body with lens attached, but would be sufficient for the camera body only. The extra foam inserts are about $12 per set. The pick and pluck foam included with the case provides easy customization for any type of application. There are three pieces (top and bottom are solid and the middle/main section is the customizable pick 'n pluck). I found that once I plucked out the general shape for the particular item, I could remove the whole block and then take a sharp knife to slice off a cross-section in order to have smaller items sit up at the perfect level. Overall, this is a great case when you need serious protection for sensitive or expensive gear. Being able to purchase additional sets of foam make this case usable for a variety of applications.

Short Version: Giving it as a gift to be used a pistol case. Fits a single pistol and spare magazine nicely. Case is quality construction. I'd feel confidant that my pistol would be safe from small drops to freak hurricanes. Small enough to throw into a backpack and comfortable enough to carry on its own. Giving as a gift, and would recommend to anyone with something that they want to protect and is small enough to fit. Use: I giving it as a gift to be used as a pistol case. A pistol and spare magazine tuck nicely into the case, still leaving about inch all around for padding. There's not enough room for much else. Maybe a cleaning cloth or some other very small item, but don't expect this to be small range box. Pros: Excellent quality. If you've never held a Pelican case you can recognize the quality as soon as you hold you. They just feel tough. This case is just large enough to carry "the essentials" of one pistol and a spare mag, yet small enough that you can throw it into a backpack. Cons: It doesn't fit a lot, but it fits exactly what it needs to. If I wanted it to fit more, I would have got a larger one. For this specific purpose, there are no cons to this case. Recommendations: I would recommend a Pelican to anyone who needed a case to protect something valuable. This specific case I would definitely recommend for a pistol case, or as a case for small electronics.

This particular case is pretty small ... about the size of your average lunchbox ... but it is really tough and very adaptable to any use suited to its size. In my particular case, I chose it as a carrying/storage case for six Midland walkie talkies, which fit perfectly in it when lined up front to back, belt clips removed. No room for accessories, but my main interest was keeping all the radios together in the smallest possible carrying case. I took out the entire center of the pick/pluck foam layer (it's exactly 2 1/8" inches thick), leaving just the uncut foam border, and then replacing the pick/pluck center with a home-made frame of cardboard separators, 2 1/8" deep, just so the radios don't knock against each other inside. Couldn't have worked/fit more perfectly (see photo). I've got a larger SKB case, and would call this Pelican case comparable to SKB in every way, except the latches, which are significantly harder to open/close than the ones on my SKB case. These ones are pressure/tension clasps ... SKB uses a spring loaded toggle, covered by an outer latch ... easily opened with a press of your finger. Not a big deal for me, however ... especially at this price. I found this Pelican case to be a great alternative to SKB, which are a bit more expensive.

Great product.

Ultra resistente y confiable, quizás un poco pesado pero es normal dado lo robusto del mismo.

Perfect size for small equipment

This Pelican is a great size for what I required it for ( holding my Fluke test meter ) and all the leads

Excelente produto!

Good