8 Pack Rubber Case Feet + 2 Set (20pcs) Repair Replacement Screws Set + One Phillips Screwdriver Compatible with MacBook Pro for A1278 A1286 A1297, 2009 2010 2011 and 2012 Version

I've done quite a few upgrades to my Late 2011 15-inch MacBook Pro over the years, including upgrading the RAM, replacing the hard drive with an SSD, and installing a new battery. This is by far the easiest upgrade to do, and it's very useful. When the original rubber feet fall off, it leaves an open hole in the bottom of the case that allows dirt and dust to enter. This can have major consequences depending on how you use your computer and when, if ever, you open it up to clean it. These rubber feet are very easy to install. For mine, I took the bottom of the case off, cleaned with rubbing alcohol, pressed the new feet on and replaced the bottom of the case. But if that seems like too much work, you really don't even need to take off the bottom of the case. Just make sure the surface is clean and free from any of the old adhesive and press the new pieces on. And if that wasn't enough, this kit comes with two sets of high quality screws. It had never occurred to me to replace the original screws, but after 10+ times of opening up the bottom of the case, the originals had started to strip out slightly. Not a big deal at the moment, but could be a problem in the future. The new screws come pre-greased and were easy to install. Even with some pressure, they showed no signs of deforming.

This is an awesome kit to give your Macbook Pro a little refresh. AND IT'S ONLY SIX DOLLARS. I thought they'd be cheap parts, but I'm very satisfied... My girlfriend and I both got Macbook Pro's this week with either missing or worn rubber feet. Mine was also missing two bottom screws so now we both have new screws for the bottom cover and new rubber feet. Yes, you read that right; for $6 we both have all-new screws and rubber feet. I will say the feet aren't super easy to install (which doesn't reflect this product, but the design of the feet for the computer itself). I didn't have any real issues, but there were a few where I couldn't get them lined up perfectly with the little hole outside of the main, big hole. I just left them to prevent wearing down the adhesive. If they fall off then I can always buy another set and try again. My error... The feet stay on either way. To be safe, I actually popped off the bottom cover and used a soldering iron to "seal" the rubber going into the Macbook Pro hole. They seemed solid, but now I know they aren't going anywhere until I want them off. If you're looking for rubber feet for your Macbook just buy these! They're inexpensive, REAL rubber (they don't slide around like others I've read about), and they include new screws/tools. I feel like I should've paid more than $6, but I'm not complaining :)

This kit comes with a full set of screws for the case and feet for the bottom, enough to replace the parts on two mac-books. The feet are rubbery and are more sticky than the old plastic feet. No issue to me but you should know. The supplied screwdriver fits the screws perfectly, removing hard to remove case screws without slipping. The screws do not have the pre-applied thread locker of the originals, but no screws have loosened in the months it's been back together. Fast, free shipping (for prime members) and quality parts say, give me 5 stars and let's get this laptop tuned up.

I had put off ordering these...it just didn’t seem important. I had to get a new battery anyway, so went ahead and ordered these as well. They actually reminded me that the Apple laptop cooling system leaves a bit to be desired anyway, but without feet, it simply cannot circulate the air across the bottom. So don’t do what I did and delay. They are so cheap, but important to keep your MacBook Pro working properly. Quick shipping and very well priced. These are the second set of replacement feet I have gotten from this company...not bad for a 9 year old laptop. Show me a Windows laptop that is still worth keeping after 5 years, nevertheless 9. I added some memory and replaced the battery twice. Not a bad deal at all.

The set itself is great and has everything you need for a decent price. only needed 2 of the rubber feet but great to have extras as those seem to come off unexpectedly. has all the screws you need with screwdriver and use one of the pics provided on the product page to see which size screw is put as you have short ones on the edges and long ones in the middle. Brush was nice to use to clean my keyboard and clean the area to replace feet and also find a youtube video to learn how to replace them. Overall great set to fix up my Macbook Pro as I like to use it as long as I can

The replacement pads fit perfectly into my 2011 MacBook 17 inch laptop. The original ones had torn off and I thought I could do without em, but realized after a few months that dust can get in. These really did the trick. Also comes with screws, a screwdriver, a brush, and another set of pads. What a great deal for the price. I don't know why people are complaining that the screwdriver doesn't fit the screws. It fit exactly and tightened my screws perfectly. 5 stars and I'm very pleased.

The pads seem pretty good with a slight rubbery texture that helps it not slide, and what seems to be a strong adhesive holding them to the case. I did clean the area with 91% isopropyl alcohol before sticking them on. Will update if something changes, but I doubt they're coming off unless they get heat or water damaged. The screws are the correct fit, although the heads seem a little more prone to stripping. Just be gentle and they'd do the job.

The rubber case feet on older MacBooks need replacing after a handful of years of use. These replacement feet were very easy to install and fit perfectly. Very nicely packaged. The enclosed replacement case screws will be very handy in the future as those screws are tiny and easy to lose. When you install these replacement feet I recommend you very carefully clean the area of attachment with isopropyl alcohol to remove any traces of the old glue.

Llevaba tiempo buscando unas patas de goma para mi Macbook Pro Late 2011 modelo A1278 que fueran de calidad y a buen precio y las he encontrado. Aparte los tornillos quedaron a la perfección y con mejor agarre que los originales. Se agradece mucho que incluyan el destornillador. Para colocar las patitas únicamente hay que quitar los restos de las anteriores, limpiar muy bien la superficie de la tapa donde estaba el pegamento, luego despegar las nuevas del plástico, alinearlas y colocarlas presionando un poco hasta que se sienta un clic y listo. Pros: -Las patitas parecen originales en cuanto al material (yo diría que un poco mejores). -Son muy fáciles de colocar. -Antideslizantes. -Son dos juegos de patas y dos de tornillos. Contras: -No son perfectas, la circunferencia de las patitas es mínimamente irregular por lo que si te acercas mucho te darás cuenta que no cubre a la perfección en la circunferencia de la tapa (es un detalle mínimo que no afecta su uso, es meramente estético). Es todo lo que tengo que decir de este producto, son muy buenas y valen mucho la pena para no seguir dañando la tapa de la Macbook Pro.

Bad quality and missing item, the rubber feet is not as written in the discription. And the screw is missing, bad and sheap quality.

MacBook Pro 15" 2011 missing two rubber feet. Rubber feet fit perfectly, adhered well. No more slipping off my cooling pad. Added bonus: Screws for the back plate. I was missing all but 2 screws. Magnatized screws fit perfectly, and the included screwdriver made life easy. Worked great for me.

This item was shipped and delivered the next day. it is excellent quality and great price. It also comes with cohesive under the rubber footer, just peel and stick on (no super glue or anything needed). It is the exact match to the original rubber footer, there is only one original in the picture are you able to tell the difference?

Everything was great except the tip of the screwdriver came off with the first screw :( otherwise it would have been 5 stars....