phopollo Led Strip Lights Color Changing 16.4ft Flexible 5050 RGB Led Lights Kit with Power Supply and 44 Keys Remote

I ordered this one because it comes with the adhesive 3M backside. Other models have clips that make install a pain, this one was super easy, and I was able to cutoff the excess. One thing on this one, it says to line up the arrow to the arrow on the trip, there was no arrow. The connection only works one way so it’s easy to figure out if it doesn’t turn on one way, flip the connector and it will work. Also, this does not appear to work on a phone app in case you are wondering. The remote can easily break if you sit on it by accident. For the price, this was a great buy for what we needed it.

I only needed a 12" strip, and would have preferred to have 4 or 5 LEDs, but the cut point only provided 3. I made a cut after the cut point, hoping to get the 4th LED, but inadvertently made the cut between LED 4 and it's limiting resistor, which is after the LED and that 4th LED didn't get powered. Theoretically, I think you should be able to make the cut wherever you want, but need to make sure you include the respective resistor for which ever LED will be last in line. I may purchase the connector/ splice kit in the future to make a strip that includes a couple more LEDs. Nonetheless, with only the 3 LED's, the illumination is approximately what it was originally. All of the color combinations work fine. The plaque is an engraved plexiglass panel, with an aluminum housing across the top where the LED strip is located, and the light illuminates the panel, highlighting the engraved image. Not sure why so many are experiencing issues with dead segments, but take care where you cut, and if installing splice connectors, make sure you orient them properly relative to where the 12VDC line is on the strip, and the respective mark on the connectors. If everything is installed properly, any subsequent segments should be powered. Imprinted on the strip is +12V, C, R, B, and when two strips are connected together, the same alignment must be maintained - +12V to +12V. If the strip orientation gets reversed - 12v to B, any subsequent strip(s) will not work. If splicing, the cut has to be made in the center of the cut marks, ensuring there are exposed contact surfaces for the connectors to work properly. You cannot install the connector over the white surface of the strip - no electrical contact will be made.

The lights are great I put them on all the time .

In all, these lights were awesome. I got 2 packs and They stuck to my wall fantastically, and it got very bright. The only problem I have with them is the remote for one of the packs. Only the light choices and brightness buttons worked. The fade and all the other choices didn't work as well as the others. Even the power button didnt work. You had to go to the plug-in and unplug it yourself. Other than that these are great and I highly recommend them! I hope I just got a bad batch:)

EXACTAMENTE EL TAMAÑO QUE TENIA LA VENTANA. LO MONTE EN MENOS DE 5 MINUTOS.

I can only give a review for the first set of lights I ordered. They worked great and are beautiful. Remote works and is a great product that why I ordered another set of lights. The second set adhered to the wall great but when we tried to turn them on they wouldn’t. I have a very upset kid right now.

Update: After only about 4 months, one of the strips flickers even though its turned off and when turned only only glows red and cant be changed. The other strip turns randomly on by itself and can't be turned off unless you unplug it. Now i have to take them off, which is ripping off all the paint thats stuck on the glue and I have to repaint before finding new lights that actually work. Ordered 2 of the exact same, but received 2 different ones, even though it's exactly the same packaging with the the same numbers on it. One of them has the LED lights farther apart than the other one (see pictures). We didn't notice this until both strips were installed to the wall. Tried to remove it but the paint is coming off, so we just left it that way. Also, one of the strips randomly changes colors, most of the time it goes into "flash mode" without anyone touching a remote, kinda annoying. Otherwise the LEDs seem nice and bright and for the price they are ok, but wouldn't buy again.

LEDs are pretty bright at max. Good length for a good price. I used this wheel to dec out 2 PC's and the back of a TV and still have 2 short accent strips left. I have the ones around the TV plugged into the wall using the included power supply. For the PCs I also bought some "RGB strip light connector cables" to create my own shorter strips and plugged them directly into the 12V 4 pin RGB connector on the 2 motherboards. Doing this I'm able to control the fans using MSI Mystic Light. The LEDs don't get as bright running from the motherboard but that's to be expected. With dedicated power they are much brighter(ie. with the included adapter). The LEDs aren't individually addressable, but I didn't expect that at this price. So what this means is they can't "chase" down the strip, the entire strip is treated as one big light. Still, highly recommend if you just want LEDs that can be a custom color.