








📦 Elevate Your Viewing Game!
The VideoSecu MW340B2 TV Wall Mount Bracket is designed for most 32-65 inch flat screen TVs, featuring a robust steel construction that supports up to 100 lbs. With a VESA compatibility of 400x400mm, it offers a low profile of 2.3 inches and extends up to 14.5 inches. The mount allows for a 15-degree forward tilt and a 5-degree backward tilt, along with a 130-degree swivel for optimal viewing angles. Installation is a breeze with the Lift n’ Lock system, and it includes a bonus 6-foot HDMI cable and common hardware for easy setup.


M**K
Works for my heavy Vizio 3D 47" LED
I've had my Vizio 3D 47" LED TV for about three years now. My TV weighs 51.8 pounds. This is my 3rd mount (haha). The first mount I got was from Sam's Club and was supposed to be designed for flat screens that were up to 47". But it was terribly weak, and you could see the tube steel actually warp a bit when moving it. Then I got another one here on Amazon (Mount-It! Vizio Compatible Swivel TV Mount) but after 6 months, it began to come apart. Although it never dropped the TV, it was pretty close to doing so. This one had great reviews, so I thought I would try it. My complete review is below ....1) Strong for the size. Its about half the weight of other heavy duty adjustable mounts that I have purchased on Amazon before. Yet its strong and doesn't warp or bend when articulating from side to side. I am very impressed with it. 5 of 5 stars2) Tilt Adjustment. The tilt adjustment, which angles the top down or up, is quite good. It uses a flip up lever and when you push down, it clamps it firm. Others use a screw knob which is much more difficult. 5 of 5 stars3) No Level. This unit does not come with a built in level, but I just used my own. 4 of 5 stars4) Small Base. As others have said, this unit has a small foot print and could make it difficult to mount in the correct room position. Fortunately for me, the mounting stud is at the center of where I mount the TV. 3 of 5 stars5) Right and left articulating swing angle. This type of mount is good because it provides and right and left articulating swing angle. My eating table is a raised bar height table to the left of the TV. The swing angle allows me to swing the TV over to the table when I am enjoying a meal. However, when I am cooking in the kitchen, I need to swing it to the opposite side. The angle is not quite as high as others because the articulating frame is not as long as other mounts do because of its size. But it still works for me and should for most people. 5 of 5 stars6) Overall Design. I like the way the bolts, especially for the articulating swing mechanism, are easily accessible. This allows for an easy visual inspection to see if the bolts are tight. Other mounts have the bolts hidden and can't be adjusted or tightened which could cause the TV to fall if they become loose. 5 of 5 stars7) Level when articulating to the left or right. As others have mentioned, nearly all these types of mounts to tend to warp a bit when articulating to the extreme left or right. However, because this works well with my heavy 47" TV weighing at 51.8 lbs, it does not warp and therefore the level does not need to be readjusted every time I swing to the right or left. I would say if you have a heavier or larger TV, that might be a problem with this particular mount. The last mount I purchased did have a better mechanism for leveling after articulating - You just leveled the TV with your hands. So, therefore I would be cautious when using anything above a 50" TV if you didn't want to mess with the level every time you articulated to the left or right. Again, I am pleasantly surprised how well it does with my 51.8 lb Vizio 47" TV.8) Ease of mounting. I was able to do mount the frame to the wall, and mount the TV to the frame by myself. Two people would be better, especially if you have a heavier TV. 5 of 5 stars9) Smooth Operation. The articulating frame is extremely smooth and it doesn't take very much effort to return the TV to the center position. Its much smoother than the other mounts I have owned. 5 of 5 starsAs others have said, this is a very good mount and strangely strong for how light it is. I have no problem recommending it for flat screens that are heavy up to 47" in size. My previous mount that this one replaced was listed as "Mount-It! Vizio Compatible Swivel TV Mount for 32-60" Plasma & LCD". I would not recommend it because the articulating bolts came loose and there was no way to tighten them.I fully recommend this mount
C**L
Works Well On Sony Bravia 46" - Highly Recommended
This VideoSecu TV Wall Mount is fairly easy to setup (with an extra set of hands), provides tilt and swivel functionality, and is also a great value. Here are my observations:Needed for standard wall mounting, but not included; Stud Finder, Drill, 7/32 Drill Bit, Hex Wrench Set, Socket Set or Adjustable Wrench, and a Philips Head ScrewdriverPros-+ Strong; easily supports my 36-pound TV+ Easy Setup; with my teen son's help, we had this up on the wall and the TV mounted in well under 30 minutes+ Adjustable; allows TV to pull away from the wall, swivel to the left and right, and tilt up and down+ Hardware; comes with all the mounting hardware likely to be needed+ HDMI Cable; includes a good quality 10' HDMI cableCons-+ Tricky Tilt Adjustment; to get the final leveling after the TV is mounted, it may be required to adjust two screws with a Hex WrenchThis is much better quality than expected for the relatively low cost of this sturdy and well made mount.Highly Recommended!CFH
J**E
Great mount !
I love this mount.Tried it on a 55 inch Vizio (Vesa 200 x 200).Worked Great.Sturdy, plenty of adjustments for tension on the arms, leveling ,Etc. Perfect size for 16in stud spacing,or on block or concrete using Tap Cons.Would not suggest for under 40 inch Tvs as wall bracket may not be covered when arms are retracted .Requires more assembly time than high $ mounts,but I have hung 600+ Tvs and assembly is pretty simple for a swivel/tilt mount.If you are not good with your hands and have issues turning a screwdriver,then this is not the mount for you.But if you have a little skill or smarts ,you can't go wrong. 1/2 driver or socket required for wood studs.We use toggle bolts also without issue if the studs aren't where we need them to be. Not long ago a mount like this was 200$.I paid 32.Deal !!!!
Trustpilot
3 weeks ago
2 weeks ago