MaxAP Canopy Enclosure Kit, 10 x 20 ft. (Frame and Canopy Sold Separately)

Looked at several side walls for my temporary 10x20 carport (we use this for family gatherings usually 3 to 4 times a year). the sides fit very good almost perfect. I did verify and would suggest you verify the height of your carport before deciding on this brand. As far as durability of the side we did have high winds one day and the walls withstood the winds (the carport was anchor down). would recommend for temporary set up.

Perfect to wall off my carport. The description is clear that this is a wall kit.

Instructions made it easy to setup, waterproof in the rain and hopefully durable this winter.

The sturdiness of the product is terrible it does not fit a 10 x 20 frame the ends are to narrow and won't reach the sides using the bungee cords left a gap small amount of wind and they torn to pieces did not last 48 hours after being put together I will not recommend this product to anyone

It's very important that purchasers know that this is *The Enclosure* kit, which means that it is the SIDES only! There is also a One Star Review here that states it is the canopy TOP only, but that has proved to be incorrect--at least from what's in the box that I received. Is the product good? I rightly don't know yet, because I haven't tried to set it up. I'm not taking off the old canopy until I receive my new canopy top (which I just ordered). However, I must say the amazon picture IS misleading. They need to gray out the top of the canopy in the picture, that way we, the purchasers, know that what we are ordering are only the sides. It's the "ENCLOSURE" kit title itself that I find misleading, due to the fact that one can purchase the frame separately, and, in my opinion, the enclosure is what encloses this frame. AND, one can make an argument that, not only the sides, but the canopy TOP also encloses the frame--and the top IS pictured. So, if you want the sides and the top to sit on the 'ribs' of your carport, then you need to order this 'Enclosure' kit, but also you'll need to order the top at the following link (that is, if I ordered the correct product. I haven't received it yet): http://www.amazon.com/gp/product/B001G7Q1YK/ref=oh_details_o01_s01_i00 There are many carports and their covers shown on these amazon pages, and they need to be simplified--amazon, in my opinion, needs to clean this up a bit. How about offering both the carport top and enclosure kit together for one price? Perhaps it's there already, and I simply didn't understand it. I hope that helps everyone.

THE METAL RINGS ARE NOT PUT ON CORRECTLY NOR ARE THEY EVEN, TOO CLOSE TO EDGE AND DI NOT LOOK AS THEY WILL HANDLE WIND. THE RINGS/HOLES ARE PLACED TOO FAR APART WHICH MAKES TARP HANG VERY LOOSE IN BETWEEN WHERE THE BUNGEES ARE TIED.

Good quality product & price

This is exactly what I wanted to cover my boat. However you need to know this, 1) if you plan to use it as a temporary shelter then you won't find a better product. 2) If you want it to be a more permanent shelter then you will need to do some diy upgrading. You will need to use some more substantial ground anchors, you will also need to invest in a good grommet tool. I have had this shelter in place for approximately a month and I had to nearly double the grommets for tiedown to keep the material in place due to wind, plus a couple of factory grommets were torn loose. After adding additional grommets there is no more worries about wind or torn out grommets. Over all I would recommend this product.