Supershieldz (3 Pack) Designed for Samsung Galaxy Tab A 8.0 (2019) (SM-T290 Model only) Screen Protector, High Definition Clear Shield (PET)

Protect well, decent price, easy enough to install. Touch sensitivity seems good, fit is accurate. No bubble issues

When I purchased this tablet about 5 years ago, I skipped applying a screen protector because the screen glass was supposed to be so superior. I did add a rubber boot on the back because I thought the glass-like back was too slippery to hold. Although this was an inside tablet, I took it outside one day to stream some audio while doing some light landscaping, To keep the tablet safe -- I thought -- I turned it face down on smooth concrete, after brushing it off. Unfortunately, there was a piece of grit about the mass of 6 pieces of sand that I must have missed. It put a pinhead whole in the upper left corner and a crack ran in both directions. Fortunately it did affect the display characteristic. I immediately applied a piece of heavy packing tape across the corner which fortunately stopped the problem from getting worse. When I saw this screen protector specifically for this old tablet, I thought it would be a good idea to finally provide more protection than I had done with the packing tape. Fortunately, the tape came off without any residue. I consider this Super Shieldz screen protector to be excellent and superior to some others I have used. It is flexible plastic versus the thin glass. I considered that to be a better option for me to work the film across the crack. The screen protector is the traditional approach with clean peel away films on both sides. It was exact size for my screen with hole in the right place for the camera. I appreciated the three pieces of positioning taps to hold the end of the screen in place while I cleaned the glass one last time and removed dust with the supplied 'no residue' sticky circle. I rolled the screen into place, purging air bubbles along the way. Prior to letting the full length of the protector drop, I lifted it a couple of times to clear a spec of something. Nice that their dust removal sticky circle did not adhere to adhesive side of the protector. There are three full kits of screen protector and application supplies in this package. TBD if I will need those too because I think this first one -- with excellent touch response -- should last a long time. So if you wisely need a screen protector for your tablet, whether brand new or years old, I suggest you track down this Super Shieldz brand.

Very good. Bought these for an 8inch mobicel tablet. They fit well, just had to cut the corners a bit rounder. I'm sure they fit their intended tablet perfectly.

Yes nice protectecters but hard to put on

What it includes: 3 screen protectors, 1 dust cloth, and 1 cardboard squeegee. Each screen protector comes sandwiched between two protective sheets that are numbered in order of removal (#1 exposes bottom adhesive side and #2 simply protects the top during installation). Supershieldz recommends watching their installation video on their website, which does helpfully show how to prepare the screen and deal with a dust particle trapped after installation. I’ve used this screen protector brand before for a Samsung phone and have had good results. Lacking in this kit (which the smartphone kit had) is an alignment process, which makes installation much less aggravating. However, a simple strip of masking tape works nearly as well. Before removing the #1 protective sheet (adhesive side), align the shield protector where you want it, making sure the adhesive layer is face down (facing the screen). On the side that has the protective sheet pull tabs, apply a strip of masking tape so that about half is on the screen protector and the other half is able to fold over onto the tablet. Note: avoid covering the #1 pull tab, as you will need this free to pull off the adhesive side. The #2 tab can be covered with the masking tape. This creates a hinge that takes the guesswork out of alignment. Once you’re satisfied with the alignment, fold over the protector and clean the screen one last time. Then peel the #1 adhesive-side protective layer a few inches before folding the shield protector back onto the screen. Let the hinge do the alignment for you as you continue peeling the #1 layer back. Hope this helps.

These 2 pack was ok. Quiet clear, jus wat I expected.

Lo ame muy bueno me sirvió bastante

it is too thick and thus not very flexible , didn't lay smoothly rather stiffly, trapping air bubbles that could not be squished out, didn't cling well at the corners