Kreg Precision Miter Gauge System - Adjustable Table Saw Miter Gauge Fence - High Accuracy Angle Cutting Tool - KMS7102

Kreg always makes amazing products, and this one is no exception. I’ve been using it weekly, and it’s been incredibly reliable. The precision is what really stands out. It locks in angles accurately and stays put, which makes a big difference when you’re trying to get clean, repeatable cuts. No guesswork, just consistent results every time. The build quality is solid and well-designed, like you’d expect from Kreg. Everything feels sturdy, smooth, and easy to adjust without fighting it. Setup is straightforward, and once it’s dialed in, it makes your workflow faster and more efficient. Overall, great tool. If you want accuracy and reliability in your cuts, this is definitely worth it.

WOW! What a nicely made item! You have to put it together. There are like four small bags of parts, some of which you may not need, depending on your saw table. There are a couple of extras of some of the plastic parts. The instructions lists exactly how many you need and you only use them on the single step involving them. You might have extras. They will not be used later on in the installation. You did not miss anything. ;-) The "fence stop" parts are shown in the instructions in a manner that allows you to clearly see how they are assembled, but the instructions never mention where they go; luckily, the box has some excellent information and photos. There is a small part on the "Swing Stop" (the "support button") that is a tiny bit too thick, preventing the Swing Stop arm from fully doing what it needs to do. I found that I had the Nylock nut too tight. Once I backed off on it so that it moved as per the instructions, the support button was only a very minor problem. Perhaps buying a small, brass or teflon washer sized to match the two brass ones in the kit (and maybe half as thick, hence my suggestion for teflon) would make this fit perfectly. The self-adhesive rule is METAL, so the instructions to use strong scissors or snips is something you should heed. I used scissors, large ones, and may need to sharpen them after doing this. You get a four foot section of this rule and you cut it at 1 and at 25 and it fits just about perfectly. The trough it runs in needs to be cleaned first with an alcohol swab (or whatever) to degrease it. The trough is exactly the correct depth, but there is a little bit of wiggle room from top to bottom, so peel off about six inches of backing at a time, press the rule against the far side and then press it flat a little at a time. Then your rule will be perfectly aligned. (This is totally not important. I am just OCD when it comes to being as precise as I can with stuff like this.) The four "glides" that are installed into the fence arm are TIGHT. I had to press hard to get them started and then tap them in with a tack hammer to get them fully seated. They look like they could easily fall out or move; they won't as the fit is snug. The little lens came in a small ziplock baggie. The other parts were in sealed bags. I saved the ziplock baggie for the unused parts. (The main unused parts - for me - were a T-guide for the track bar. My table has a 3/4" slot with straight sides. Some have a T-guide to lock the attachments in place. This kit comes with a T disc and screw for the track bar that I did not use. Since I may purchase a new table in the near future I decided to save these along with the extra nylon adjuster pins and glides; I might want them later. The brass lock pin was missing in my kit and I was sort of pissed off about that. Then I took the thin, plastic tray out of the box. It has fallen out of its little cubby during shipping. It is the only LOOSE part on this device. You need to make sure that however you store this that this pin does not disappear on you. It fits snugly, and if you sort of torque the two fence and guide together a bit and then lock the protractor down the pin stays in place well enough. Excellent product. I like Kreg stuff and will buy more. Easily as nice as the Incra, perhaps nicer. Recommended!

The Kreg KMS7102 Precision Miter Gauge System is a top-tier upgrade for any table saw user looking for repeatable, highly accurate cuts. Right out of the box, it's factory-calibrated and requires minimal setup. The precision is spot on—it locks in angles securely and doesn’t drift during the cut, which is a major improvement over the wobbly, basic miter gauges that come with most saws. The fence and stop system are extremely helpful for making consistent crosscuts and angled cuts. The anodized aluminum fence is long, sturdy, and easy to adjust, while the adjustable bar fits snugly in the miter slot with zero play, eliminating inaccuracies caused by wiggle or flex. The angle markings are clear and precise, and the positive stops at common angles (like 0°, 22.5°, 45°) make setup fast and frustration-free. Whether you're working on fine woodworking or just want dead-on cuts in DIY projects, this gauge delivers. If you want to upgrade your table saw for greater accuracy, repeatability, and ease of use, the Kreg KMS7102 is worth every penny. It’s a reliable, professional-quality tool that makes a noticeable difference.

This is a great miter fence and assembles easily, HOWEVER, depending on the size of your tablesaw, and where you place the little white inserts on the bottom of the track, it will pivot on the z plane left and right. I am going to look into alternative ways to do this, or just get more of those dot things. It wouldnt surprise me if someone made a 3d printer STL for more of these dots.

Recht teuer aber definitiv sehr gut, sehr präzise für holzarbeiten

Muy preciso y también brinda seguridad al realizar el trabajo.

j'acheté cette jauge pour ma scie sur table évolution rage 5, satisfait de cet achat,après une modification de la barre alu guide qui a une épaisseur de 9,5mm à 7mm car la profondeur de la rainure de table n'a que 7mm,je pouvais le fraiser au boulot.la largeur de ce guide est de 18,6 et la largeur de la rainure de table est de 19,6,dans la largeur de ce guide y'a 5 taraudages M5,des vis M5 sans tête sont avec pour règler le jeu,autre bémol le mètre ruban adhésif est en inch,j'en ais acheté un métrique sur amazone

This was a hard decision, buy Incra or Kreg. I read every available review and the precision miter comparison review in the Fine Woodworking Magazine where the Kreg was judged to be the best buy. Incra miter has a lot of features but it appears that the attachment bracket on this product needs to be shimmed, a no, no to leave that to the buyer. The Kreg is advertised as factory calibrated and I can confirm it actually is. I recommend to set the Kreg miter up very carefully. I used Lee Valley set up blocks instead of a tape measure. Use utmost care in cutting the tape correctly. The miter bar guide screws where set up as follows: ( deviation from manual) - insert all plastic guide screws with a correct fitting screw driver - use a stop block to set all 5 screws flush with bar - then turn each screw exactly the same amount in small increments if bar is sloppy (think carburetor adjustment) This procedure works best and I was able to set guide over entire lengths first time with a sweat alignment as result. Following the Kreg procedure is a hit or miss. Next, the unit should definitively used with a 3/4" fence long enough to extend over saw blade. This way you have proper backing for small work pieces. I made several for straight and miter cuts. However I screwed the first on up as I did not allow for the plastic guides inserted in the extrusion. I recommend to measure centreline for holes with miter installed. Other Option would be if Kreg would add these dimensions to the manual to avoid these mishaps. This miter gauge is definitively a buy. I will make my own stop attachment for mitred pieces the Kreg option is no good.

Arrived promptly but with 2 minor bits missing. New parts arrived in a couple of days following a phone call. Very accurate. It has taken my use of the saw bench up a level in accuracy.