Pepperell TOOL01 Ezzzy-Jig Bracelet Maker-

Works great and is easy for kids

Excellent product and fit for the job

I read the reviews on this item and other similar jigs. I took a chance on what seemed from the reviews to be a jig made from soft pine wood that had problems holding the setting and the wood compressing because it was so soft. Not so! The construction of this jig is made from hard wood, and if there is any wood compression or issues, then I would look to the user - not the jig. I did change the buckles that came with the jig because they didn't match the buckles that I have, but that is a no-brainer anyway. it was nice to get it with sample buckles to see how to install the replacements. I also added another set of metal 5/8 inch buckles that I use, and now have three different types. Working with this jig is simple and makes duplication and repeat-ability of bracelets easy. I have marked often used sizes on the wood with a pen and can duplicate these sizes by just sliding to my marks on the wood. I waited until I had the jig for a couple weeks and made about a dozen bracelets to make sure that I tested it thoroughly. I really like working with it and recommend it. If you want an inexpensive jig, that you can use to make repeatable size bracelets, then you will like this.

I've only had the jig for about four days but I've already gotten plenty of use out of it. Yes, there are some things that could be improved but, as a starter tool, it works for me. As others have mentioned, the buckles pre-installed don't seem to match any of the buckles I've bought but that's really not an issue. I can either swap out the pre-supplied buckles for my own or I can do as I have been doing, using the posts, which came with spare buckle holders, to use the type of buckle I'm using. The picture doesn't show the end posts that came installed on the jig that arrived and the directions made no mention of the change so it took me a while to figure out what it was for. I assumed the spare buckle holders were simply spares. Then it dawned on me that it was a means to quickly swap out a different buckle set-up. No screwdriver required. Just snap an end of the type of buckle you want to use into the plastic holders, slip them over the hooks, and you're ready to go. With the jig, it seems to take me longer measuring out a length of cord, fusing the ends, and threading them through the buckles than it does to weave a bracelet. I find I have no difficulty getting consistent tension on my knots but, then again, I taught myself how to knit so I'm used to such things.

This vis so cool made so many so quick. Time for selling very easy to use

Before I bought this jig, it took me about 45 minutes to make a paracord bracelet. Measuring, rigging the snaps, trying to secure the cords to the correct length, braiding, securing and singeing the ends. Yesterday I made a bracelet in 15 minutes. A-maz-ing! Set the jig to the length of the desired bracelet, cut 8 feet of cord, string through the snaps, hook the snaps into the jig, then braid. When you reach the end, secure and singe your cords. The braiding, where I would have to fight with the cords, the 'unders' and 'overs', was not an issue. I finished it so quickly, I was almost ashamed to charge for it. It seemed like cheating. Overall, I think the quality of the bracelet is better, knots more even and clean. And I am especially pleased with the sizing ability - just take the measurement of the wrist (with ease) and set it on the jig. The jig is sturdy, markings clear, easy to adjust, and it handles both 550 and 325 size cord ends. I heartily recommend this, even for the hobby user.

I bought this for my daughter, as she's started getting into making paracord bracelets. There are two "fixed" buckles at each end, one for a 3/8" buckle, and the other for a 1/2" buckle. Plus, what I didn't realize when I placed the order is that there is a hook at each end between the 3/8" and 1/2" buckles with a white buckle clip on the hook (I have no idea if that's the technical term, but you can see in the pictures, there are black buckles and white buckle clips holding the black buckles to the jig). This is so you can add buckles of other sizes to the jig without having to take anything apart. This was a great added feature because I'd purchased 5/8" buckles for my daughter to use. With this jig, you can easily make bracelets from 6" - 12". My daughter can make a bracelet in just a few minutes now that she's using the jig. She's been making them for all of her friends in the neighborhood. I'm going to go broke buying all that paracord! It's easy to use, and it works well.

Sturdy and well made from hardwood, not pine. Size markings are fairly accurate and help produce the length you want. I added some "rubber" feet to keep it from sliding around too much and they help a lot. Unless you have the exact clasps, you'll likely have to change out the ones attached to the jig. I was expecting this so I was not surprised. Product box label and included instructions show a different (older?) model - I thought I got the wrong one until I opened the box. The Amazon listing pics show the correct version and it has a better design, with both ends of the jig supported. I'm glad I bought this. I was thinking about making my own, but this one is less expensive than the one I'd planned, and probably better constructed, considering my meager woodworking skills and relative lack of the tools I'd have needed,

Dieses Hilfsmittel für Paracord-Bänder ist sauber verarbeitet und aus Hartholz. Es ist praktisch zu händeln und robust. 2 gängige Verschlussgrößen sind schon angebracht. Für eine 3. Größe hat man die Halterung. Sie ist sehr praktisch gemacht. Theoretisch kann man auch die schon befestigten Halterungen schnell auswechseln. Diesen Bracelet Maker kann ich nur weiterempfehlen.

写真では、２つの脚が付いた台の上を、Ｌ字型のもう一つの台がスライドして長さを決める（固定する）ようになっていますが、届いた物はそれぞれの台に脚が付き、重なったスライド部分を金具で締めるようになっています。締め金具が一箇所だけなので、かなり力を入れて締めないと作業中に左右にずれてしまいます。私は間にマットの滑り止めに使うウレタン製のメッシュを挟んで使っています。また、ソファーなどで膝に乗せて使うには幅が狭すぎてすぐに倒れてしまうので、木板をＴ字型に取りつけました。インチ表示は不便なので、反対側の側面にセンチメートル表示の竹製の定規を貼りました。それから、縦のパーツと横のパーツを固定する木ネジが写真では２本になっていますが、実際には１本で固定してあります。コストや強度を考えて、色々とマイナーチェンジが施されているのだろうと思いますが、やはり商品写真は正しい物を載せて欲しいものです。

Muy robusto y util para sujetar las cuerdas, mas aun si estás aprendiendo. Ademas el margen de medidad esta muy bien y los dos tamaños de enganche

Bel telaio molto semplice ma ben fatto la foto non rende merito. E' regolabile e ha 2 attacchi per le fibie uno piccolo e uno medio, manca il grande ma nella foto non c'e', al centro ha un gancio con un ulteriore supporto per eventuali fibie che non entrano nelle due fornite. Rende molto facile la realizzazione dei bracciali su misura visto che una volta presa non si muove piu'. Prezzo onesto ma spedizione lunga, prendetevi almeno un mesetto di tempo. Ottimo il prezzo pagato circa 22 euro compreso spedizione

Muy buena calidad y llegó antes de lo esperado. Es altamente recomendable el producto. Fácil de hacer las pulseras de Paracord