Countersink Drill Bit

Pros:1. You can't beat the price of this 7 piece countersink set.2. I like that it comes in a case with form-fitting foam divider.3. The bits have a good weight to them.4. The collar can be removed or relocated to adjust for depth.5. Kit comes with an allen wrench for easy adjustments.Cons:1. The case is a bit flimsy, but overall does the job just fine.2. The set is metric. This is not really a con, just pointing this out.Summary:This countersink set is designed for use with 2" x lumber. It drills through common construction boards rather easily. You can use these with 1" x boards as well, if all you want to do is make a screw head flush with the surface. It's strength is countersinking bolts where you need to go deeper into the lumber. The bit and collar act very similar to a pocket hole bit and collar and should be cleaned out after every use for best results. This is a very easy process and only takes a few seconds. I haven't had these bits long enough to really speak to durability, but they seem to be well made. If you have projects where you need to attach 2"x6" (or similar) boards, and wish to sink bolts below the surface, this countersink set will do a great job at a low price. I would recommend them.

I purchased this apron for multi-use. The material is extremely durable and it feels like it will take a good beating over time…a good workhorse apron. The other good news is that it is very comfortable to move around in. I can bend, twist and reach with ease. The cross straps that go over the shoulders and across the back feel secure, but are easy to adjust. In addition, there is a clip in the back that allows me to take it off quickly (a must when all of my children are at home and in need of attention as well as my projects). The best feature of this apron is functionality. Two good-sized pockets at the lower waist have flaps to protect my contents from debris. Not just one, but two sturdy loops for a hammer and other tools. Another smaller, square pocket at the chest sits next to a couple of pencil-shaped pockets. Next to that is my FAVORITE feature; a cell phone pocket! There is a flap (secures with a snap) over this, as well, to keep my phone from falling out and to protect it from any dust or liquid that might be flying around. And if you care about looks and style, the apron is a nice darker gray color and is sure to make you look and feel legit. Looking forward to spending some quality work time in this apron.

I bought this kit because I like the idea of countersinking screws. The countersink cutting bit appears to be one sized, that is, all cut the same size hole. I tried out the smallest one and it worked well. One of the countersink cutting piece came off of one in the box and I had to reposition and fasten. It seems that the bigger the drill bit the deeper the hole will be drilled since the countersink cutting bit sits at the top of the drill bit. I suspect that if you have a short screw you might have to use the shortest countersink drill bit to get the countersink part without drilling a deep hole.

This is the first shop apron that I’ve ever used. I totally get it. I’ll never work without one again. I’ve seen some amazing looking aprons on instagram for top dollar. I wanted to know If I would even like one first. So I purchased this one. And after some time and heavy use. My conclusion is this. This is a very rugged apron the only reason it’s not 5 stars is the lack of tape measure holder. I would like to see some type of riveted metal piece for the tapes to slide on and off of. That would make this perfect for the price range. I plan to add it myself and I will upload a update pic. I can’t imagine spending $200 on a apron for the shop. So I’m gonna make this work for me. I would but this one again if I needed too.

Title says it all, Took extreme effort to drill into a 2x 4. (a new soft one i could dent with my fingernail.). I would return them but it is not worth the bother

Dang good apron.Material: Nice waxed canvas. Works with water like you think it would. Pretty easy to clean up. Stitching is strong. Sturdy all around.Size: It really is one size fits all. I wear L-XL shirts and I had to tighten more than I would expect to, so it can fit people much bigger than I am, but it didn't feel like one of those thing where you tighten it up a lot and suddenly surrounded by all these long straps.Comfort: Really comfortable. Pockets and everything line up well so you don't have the tools and stuff stabbing you in the stomach when you bend over. Shoulders fit well.Utility: The phone pocket snap button is strong but not so strong you're gonna rip the apron apart to get the thing undone. My iPhone 8 fits well. Not too loose, I was a little worried it would be too small since it says the pocket fits up to the Plus model but it worked out fine. Does exactly what I want.

This has been a great purchase! I took some pictures before I started using it so you could get a better idea of what it looks like. First, I am really impressed with the quality of the apron, it is definitely made out of grade "A" material and will last for a long time. Second, I really loved the pockets on the front since I seem to always drop things or misplace things while doing home projects. Third, the clip on the apron straps are convenient and make it easier to put on compared to ones where you have to tie them on behind your back with a bow (the straps are plenty long and can accommodate pretty much anyone of any size) so basically, this apron does not discriminate. Fourth, the shoulder pads that are on the straps are a must have, it has been so nice when the apron is weighted down with tools etc and the straps don't cut into my shoulders. I give this product 5 stars! It is a purchase that I would recommend to other people.

I bought these for the countersinks alone, and because their price was pretty cheap. I originally intended to swap out the drill bits with some better ones, but after some uses they actually work quite nice. The counter-sinks weren't very sharp however, and take some extra time and force in wood. I've only used them on a hand drill.I have only tried these in wood. I plan to use them in aluminum in the future as well and will give an update then.