Dark Gray dishwasher rack coating & glue w/25 caps - (0.5 oz) Patch, Dark Grey

Works great and easy to use. coated my rusted tines.

My dishwasher rack had rust in its joints even though I allow it to breathe after every wash. This product doesn’t match the color grey well but if you put a couple of coats then it seals okay. I have had to occasionally apply every month to a couple of spots. This is my second time buying.

This is one of those products that can extend the life of your dishwasher. I have an Asko dish washer and in a number of places the plastic coating on the rack has begun to rust. I imagine this was probably a factory defect where the coating was to thin. The most difficult thing in this process to to remove the rust down to the metal. This was done using a wire wheel on a dremel moto tool. I then cleaned the surface with rubbing alcohol and applied the Goop product. Keep the brush clean and free of hardening material and keep your thumb on the top of the bottle (as suggested in the instructions. Initially apply a thin coat overlaping the old coating the apply a second coat a day later. Let try for another day an you will have a hard coating that looks much better and seals the metal. Product seems to hold up well. I will update this review in 6 months to reflect how well it lasts.

So far, Uber Goop has been great! I had to use a hacksaw to remove the rusted end of a horizontal rod in my Bosch dishwasher (it was too thick for wire cutters). I accidentally applied two coats, allowing an hour between, before immediately adding the end cap onto the second (thick) coat. (I had read the wrong section of the directions.) I also applied a little extra around the edges of the cap, which I had trimmed to fit. After the first load of dishes (24 hours after the Uber Goop), it seems to be holding great! It worked SO well, I decided to paint some on a one-inch tear in a thin part of the seal on my refrigerator door. So far, it's holding perfectly! Also, I very much appreciated that before I started, I had asked some questions on Amazon, and the seller (RusSan Enterprises) was great about quickly and patiently answering them. They were absolutely correct about the flexibility of the caps: I was able to use a tweezers to stretch the cap wide enough to fit, despite a diameter significantly greater than that of the vertical tines on the dishwasher rack. I definitely recommend this! I'll update with durability in a few months.

It works excellent fixing your dishwasher rack. Make sure you snip out all the rust spots! I'd recommend taking it outside while doing the job. Let it sit outside for a day afterwards and it won't smell. I've had it in my dishwasher for over a year and is very durable and the color matches! It made my rack fairly new again!

It is too early to tell how long the repairs will hold up, but 1 bottle had enough in it to treat all the rust spots that showed up on my dishwasher after about 2 years of use. You definitely need to get acetone to dilute the Goop towards the end of use, as it will get gummy well before the bottle is empty. It is darker than the racks I applied it to, but I didn't expect the color to match exactly.

I had a rubberized tine break off in my overpriced German dishwasher that begins with a "B." That started rusting pretty quickly, of course. Once I bought the goop, I sawed off the what was left of the tine, and sanded down the metal at the nub to get rid of rust, and then coated it with this goop. I did two coats, after letting the first dry for a few hours. That was about 3 weeks ago, and so far all is well - no new rust. My only gripe is that there is a LOT of this stuff, and from the instructions it appears it won't last long once opened Also, it came with a bunch of rubber tips I didn't need. I probably could have spend more time researching, and maybe found a smaller bottle of the goop with no rubber tips, so that's probably more on me than on the seller or the manufacturer. Overall, recommended.

After noticing rust on my dishes I found out my rack has some crazy rusted areas. Some which have opened up the original coating. I sanded the areas and applied the product. It goes on easily, but does get sticky in the bottle after being open for a bit. Very much like old nail polish consistency, but a little more rubbery. The smell is strong so I would suggest using it in a well ventilated area. From the areas that have dried it goes on with the same texture and feel of the original dishwasher pieces. The color of the liquid though is a little darker grey than the rack. The end caps are very helpful as well for sealing some of the more severe rusting spots. Seems like it'll last so I'm excited to see how long it'll solve my problem. Fingers crossed that it's for a long while.