2 Pack 5" Universal Hook and Loop Orbital Sander Pad for Ryobi RS290, RS240, RS280, Ridgid R2600, R2601, Craftsman 315112170, 315116940 ROS Orbital Sander

I picked these up to replace the crumbling mess my OEM pad turned into, and they’ve been a great fix. Fit was spot on for my 5 inch, 8 hole, 4 screw random orbit sander. The holes lined up with the dust ports, and the pad sits flat and centered, so it runs smooth without weird vibration. Installation took just a few minutes. I reused my original screws (no hardware included), and everything tightened down cleanly. The hook and loop grip is strong, sanding discs stay put, and swapping grits is quick. Big plus that it comes as a two pack. I’ve already got a spare on the shelf for the next time the original wears out. Solid value and seems tougher than the factory pad.

Fit my old sander without any issues I am satisfied up didn't have to spend a lot of money to extend the life of my sander

See some customers say that the disc does not hold. They keep flying off. Check the disc themselves, for there are brands that would not stick to the best of pads. I bought these together with a new box of disc and they are holding perfectly. I tried another disc that I had parked in the cupboard and it is only flying off. Would suggest that after you attach a disc to go very light on the project first to see what is happening for if the paper flies off and the pad touches the material directly,it damages the pad.

The pad hole spacing is 1-1/8", but the Ace Steel Grip sander needs 1-1/4" spacing. I could not find pads to fit. I was able to make this one work by slotting the 4 holes a little bit. The manufacturer could/should slot the 4 holes slightly to make this pad more "universal" so it will fit either 1-1/8" or 1-1/4" hole spacing!

This has absolutely no velcro on it at all. At first I thought it was great. I put it on tried it out for a few minutes and it worked. Today after 15min of actually using it I found out how wrong I was because that's as long as it lasted. I am no stranger to sanding and my sanders last forever because I let the sander do the work. I do not push down on them I let them sand. I thought what is going on so I pulled out the second one and compared it to another sander that I've had for years and guess what! The new pad had almost nothing on it. The old one felt so much more material then the brand new one and I even have a pad I bought for my wet sander and it's 10 times longer then this practically smooth junk. I am no novice I have been in the trades for decades and I'm telling you this will not last one day of sanding. I'm pissed because amazon return polices are great but damn near impossible for me because the only ups store is a 2hr round trip which means I basically threw money away which is why I have learned away from Amazon lately. Regardless do not buy this trash. The seller should be ashamed of this scam garbage. Yes I'm angry because now I have to stop and go buy a new sander when I planned to finish this project this weekend. It's not like I have a lot of sanding to do but still. Edit, after I wrote this review I seen where Amazon would send me a return slip for a $1 which I was very pleased with except the slip didn't arrive in time for me to get it returned in time. I actually forgot about it until I received the return slip letter from Amazon which I have no idea why it took so long to arrive. I have noticed lately quite a few of my Amazon packages have been arriving later then the 1 to 2 days they're supposed to. Not all but quite a few. Usually it doesn't upset me but one item did because I paid more for the Amazon one to get it before the weekend and then it took longer then the cheaper one would had arrived but that's another story. I get a lot of Amazon items that go straight to the garbage because of the return issue but I'm going to start making it a piont to make the treacherous trip partly because of the new commercials in my prime lol. With all my gripping I will still use Amazon and I honestly still like them for the most part.

bought this to be used with my sander, but the sander has fitting stubs on the surface that need to seat inside the holes on this, and the holes were non existant. I used a small drill bit and put the old one that I was replacing this one with on top of this one, and used the old one's holes as a guide to drill holes into this one. After that it fit nicely and got my work done.

Needed this when the disc on 5" orbital sander flew off while sanding a part of the 8' workbench out of my garage. Easy replacement (4 Phillips #2 screws). Holds the sanding discs great, from Coarse (80-grit) up to Fine (220-grit). I expect first one to last for years, and then I'll still have the second one. YES, I would buy these again.

This would not stay on my Ryobi sander, it kept on falling off. My sander’s bristles are a bit beat, but the one I took off to replace went back on and stayed on fine after I tried to replace it with these. Maybe this might work if your tool isn’t as worn as mine, but I would stick to an official replacement.

Los discos de lija no se desprenden, tenia dudas, se uso por lapso de 8-5 minutos y sin problema

Needed to use washers to add a spacer so it will work with a Skil sander. Seller didn’t list Skil as a unit it will work with.

Non compatible avec mon appareil malgré le descriptif. Je pense qu'il s'agit de piètres immitations...

bon produit mais pas universel

Did not fit my older Ryobi