AKK A1918 5.8G Long Range VTX FPV Transmitter 200mW/400mW/800mW/1000mW Switchable VTX Support Smart Audio

Great VTX for the price. But be careful - this thing gets hot, but the heat sink seems to do it's job. I have forgotten to turn down the wattage on the bench and although it got super hot, it still was pushing the signal out. Just don't grab it in the wrong place. You will get burned. Only drawbacks for me are: 1. the antenna plug and the cable to the flight controller are on the same side. this means in a quadcopter, you will have to decide weather you want to route the antenna back over/under the vtx or turn it around and route the signal cable over/under vtx assuming you want the antenna in the back of the quad like most models. Both scenarios are not ideal and can cause some minor level of interference. 2. There is no pit mode like other similar VTXs. On this one, since it gets so hot, it would be very, very useful. I wrote to AKK and asked them if it was capable of pit mode and they just replied, "OK" which made no sense but it's a funny story, so maybe worth it. I don't think they speak good English, but at least they replied to my email. Like I said before, though, it's a great vtx for the price. I liked it enough to buy a second one for another quad. Also, thank you, AKK for not having a nonsense, weirdo brand name like "DreamGoo" or "EveryEndingRC". We see you and appreciate you.

Works as expected. Tested with Caddx Infra 2 cam, no complaints. Extra TX power feels great. Gets hot when on max power, make sure to give it room for some air. LEDs are not marked, kinda confusing. English manual is unreadable, as usual.

Seems alright. Maybe a bit more flickery than what I replaced. The instructions specify it as being 1.6 W, not 1 W, I can't actually measure what it is. Range is improved, though due to the logarithmic nature of RF power, don't expect magical distances. Also, in order to get SmartAudio working, you need to set power level values as '0' '1' '2' and '3', not the mW value. Manual doesn't tell you this, but now it works! Not bad for 30 bucks.

Lacking smart audio controlled pit mode via switch kinda stinks, cause it runs pretty warm at 200mW. Wish it had a 25mW setting and working pit mode. The video quality seems very good at this price point. I have at least 3 of these, and would buy again

Tight package. Built to survive. Easy to configure good wattage. and strait forward programming.

Not my favorite VTX, yet is a functioning VTX for backups. Would need 30x30 holes to mount the VTX. VTX has soldering pads to connect to FC via wires instead of wires and connectors. I love this feature. Here is the rub, the audio quality is not that well. There is less volume when watching the recorded videos in contrast to other models, like HGLRC and Rush FPV. This one has the lowest volume, more noise than the actual motors. I fly analog just for the fact the VTX will broadcast video and audio. It would had been very wonderful if there were extra pads to solder a microphone on them.

Awsome Vtx up there with digital. Just make sure you read the directions. I forgot and fried it not setting it up for 6s lipo. My stupidity besides that five ⭐️⭐️⭐️⭐️⭐️ new one on the way.

Probably should avoid this one. First power on for testing showed good. Newly built drone tested with a smoke stopper. 10 seconds into first flight puff of smoke. gone.

Excellent range. Does get super hot though. But to be expected.

This thing goes up to 1600mw! I’m pretty sure it’s the most powerful 5.8 vtx on the market currently. It’s great and really robust. Anyone saying they are bad is user error guaranteed. Sure I’ve roasted a couple of these but was 100% due to user error. Otherwise they last forever and get huge range!

Used this for my rc car and the range is ok depending on your antenna. If you want long range then you would have to upgrade to a 5dbi or more type antenna. Video quality is ok, good enough to see where you are going.

meilleur qualité\prix