Seville Classics UltraHD Heavy Duty Rolling Cabinet Workbench Table w/Solid Wood Top, Workstation for Garage, Warehouse, Office, Workshop, 77" W x 20" D x 37.5" H, Graphite, 11-Drawer

I read the reviews and researched this thing to death. Once I got it I removed and separated every piece, made sure everything was there, and started assembly. It was much easier than many have stated. I did use my sockets for the bolts and a battery screw gun for all the screws. Completed mostly by myself in a little over 2 hours. A few tips... 1. Do not tighten the bolts to the top until all six are in and all four sides are in place. That makes it much easier to align properly. Then tighten all up. I used my 1/4" sockets, it made that step much easier. 2. I used a right angle magnetic screw gun adaptor (as I show in my pics). Made those tough to reach screws a breeze. Even with that, keep every screw for a particular panel a little loose until all are set, then tighten up together. It will be a pain if you don't. 3. Don't over tighten anything, especially with your screw gun. You don't need to. If you go overboard you will strip the screws. 4. Tighten the bottom plastic/rubber bumpers by hand. It's easy to go overboard there with a screw gun. 5. The draws and doors are able to be aligned after install. You can get everything very close. But do understand that this isn't a finely crafted kitchen cabinet. It's a garage type work bench so it will not be "perfect", but it will be pretty damn close. 6. I'm a builder and assembling things like this is easy for me. But if you take your time, remove and separate everything first, read through the entire instructions before you start while relating them to the parts you separated, you will understand how it goes together before you even begin. It makes it much, much easier. I would buy this again in a minute. Nice cabinet, more storage than I thought, well built, and looks great in my muscle car garage. I'm ordering some other matching cabinets now to finish the garage. Once done I'll update this review and show with pics how everything looks.

I've been eyeing this rolling workbench for awhile and finally took the plunge in late December 2020. It arrived a couple of weeks later in good shape. It came in two large, flat, heavy boxes. I could easily move the boxes myself with the help of a dolly. There was a bit of shipping damage to the box, and that make a small dent in a place that is not visible. It took about 4 hours to unpack and assemble solo. Ideally, one would have a second pair of hands during assembly, but it is not absolutely necessary. After assembly, it took another hour to break down the cardboard and Styrofoam for recycling. The kit was very well packed, with lots and lots of cardboard & Styrofoam separators and lots of plastic bags. Assembly was straightforward. Instructions were excellent. All the parts were included. There were no surprises. Aligning the drawers was easy. The wooden top is very nice--it beat my expectations. The (red) finish is, I believe, powder coating; it is very nice, feels thick, and seems durable. The drawers are flat in shipping and the sides are bent up into position, a front is added and screws hold everything together. I was concerned that the drawers would feel flimsy, but they really do feel solid after assembly and installation. I've loaded the drawers up with tools, and they slide in and out nicely, and handle the weight well. The whole thing is easy to move around; the castors are large, sturdy, and work well. I've used the workbench for a few weeks now, and I cannot find anything negative to say. I believe this rolling workbench is an incredible value.

I am very pleased with this workbench. It took about 3 - 4 hours to assemble (I did it over two days without assistance). The instructions were clear and each of the parts well identified. The single tool needed for assembly, a magnetic screwdriver, was supplied and was perfect for the job. The materials were of high quality and well machined so that everything aligned which made it easy to assemble. There is a lot of storage space and the workbench top is solid hardwood that is both substantial and attractive. The unit adds to the appeal and "professionalism" of anyone's garage. I would definitely buy it again.

I researched several work benches before I decided on this one. I was a little overwhelmed after seeing the number of pieces involved. My fears were diminished once I started the assembly. The instructions were easy to understand. I assembled the bench by myself but was prepared to have someone ready to help me flip it when the time came. The drawers have rubber bushings that hold them in place so they don’t slide out. The quality of this product excellent. The casters are sturdy and easy to move. The overall design is functional but great looking. The wood work surface looks like a fine table top. I look forward to projecting on it for many years.

I purchased this because I wanted a larger workbench/tool cabinet. You can easily spend $1,500-$2,000 on a really heavy duty, well made cabinet. This is reasonable for the price, but definitely not as heavy duty as a pricier workbench. You will need to assemble absolutely every aspect of the cabinet. It was easy enough, but time consuming (it took my husband and me about 4 hours), and would be much easier with two people. There are about 200 tiny screws that you screw into rivets in various drawers and side panels. In several instances, the threads of the rivets didn't easily accept the screw and in a few cases actually came loose, rendering the screw ineffective (i.e., turning with every turn of the screw). I don't exactly love the handles on the drawers; a drawer pull would have been better. A word about delivery: the workbench arrived in two large, very heavy boxes. I'm glad I was home otherwise it would have been dumped on my door step instead of in my garage and I would have been left to move it. Customer service responded quickly to questions about assembly. I was worried the drawers wouldn't align properly, but they all did and operate smoothly.

It took a bit to assemble, but it was worth it!

Sorry in advance for the long rant. But I’m angry and I don’t want anyone else to deal with this. The product is terrible and the customer service is non existent. I bought this tool box for my hubby. When we received it the box was not in great shape but not terrible. Then he went to put the thing together. First, parts were dented. Not a major deal. But then the thing isn’t square, so when he out it together it was kiddywampus. I realize this wasn’t the most expensive toolbox out there but it should still have stability and be safe for someone to use. I contacted the company and got no response. I tried again, nothing. I filed a complaint with Amazon and they tried to reach the company, again Nothing. So I filed a claim with Amazon. Unfortunately the denied the claim because I received the item and it was as described. Well… not so much. Yes, I received the item, but no where in the description did it say the thing would not line up properly or wouldn’t be square or even the item may have minor to significant damage. So now my husband has a “new” toolbox that isn’t what it should be. I’m sure the me. Would understand his excitement when he knew he was getting this thing. Now he is disappointed and he will need to fix it before he uses it. Which by then he could have just built it himself. Oh, one more thing. When I tried to return it, the generated response said to put it in the mailbox. This is a large toolbox with a workbench on top. It certainly would not fit into my mailbox. Very very upsetting.

I needed a new work bench for my garage so I went ahead and purchased this, and I must say I'm very pleased. It took a couple of hours to assemble, but the directions were very easy to read and well organized. All of the parts were with it and all of the pieces were labeled very well so there was no problem finding the right part. They even included a nice screw driver with the unit. It is also made out of nice sturdy materials. I was actually amazed at how thick and heavy the top piece of wood was. Good quality and well engineered. It also has big sturdy wheels on the bottom which is nice because I can roll it out of the way when I want to clean my garage. I was so happy with this work bench that I'm going to buy 1 of the regular size cabinets and 3 of the mega cabinets in this collection. I have a bunch of open shelves in my garage right now that I want to replace with these cabinets because everything gets so dusty when I use a blower to blow out my garage. Very happy, go out and purchase one!!