WR60X10220 Refrigerator Condenser Fan Motor Replacement by BlueStars

Excellent prop it save my refrigerator from being tossed out. I couldn’t find it locally thank goodness Amazon it was right on time. Thank you so much.

This item fits perfectly and works just fine, easy installation worth the price. Thanks. Refrigerator fan.

The motor and grommets were a perfect match and immediately improved the cooling in the refrigerator and freezer.

Buen producto llena las expectativas

The fan motor model for my 2004 GE side by side was WR60X10020 & was not listed on this web site, but the motor looked identical except for wiring. I used a multi-meter to find the "hot wire" (120VAC) on the refrigerator's fan connector with the fridge plugged in and compressor running and found that my black wire was hot and outside yellow wire is neutral. The connectors on both refrig wiring and old and new motor connectors can only plug together one way due to flat sides in the plastic holes. However, for this fan it meant the fan's outside yellow wire got fed with 120VAC and the black wire became neutral. A motor coil of this type functions either way. It still produces a magnetic field and the shaft still turns the same way (clockwise) to blow the air the right way.One other difference between my old motor and this one was that this motor has a ground wire in the center terminal of the three wire connector and my old motor has only two wires in the connector and nothing in the middle. This new motor has a ground wire connected to that center terminal and the other end was riveted (with an aluminum rivet) in the hole that was one of the mounting points for the fan to mount to the fridge fan housing. So, I drilled it out and got two #6 screws, nuts & lock-washers from my parts drawers, just cut off that wire at the connector and mounted the new motor to the fridge's fan housings with them. That worked fine.So, it's working fine now and a lot quieter than the old 20 yr old one with worn bushingsHere's an unrelated hint: get a long round coil brush on Amazon and brush & vacuum off the condenser coils about once a year to retain efficiency and not overwork your compressor. Runs cooler and longer (more years).

This is a perfect replacement for the original cooling motor. My refrigerator was making a horrible squeaking sound coming from behind it. The cooling motor was giving out and rather than buy a new refrigerator I replaced the motor. Took just twenty minutes to install and the noise is gone.

the fan motor work and connected real good was the right part and works well

Similar issues as others:- Had to splice original connector onto these wires because the pins in this connector are too large.- The motor was also wired backwards on the connector, so I corrected that when I spliced in the original connector.- Had to shim the mounting bushings onto the motor with some plastic from a bag because the bushings were wobbly on this motor otherwise.- the motor was shipped in a small paper box that was placed in a plastic mailing bag. The box was not secured with anything and split open during transport, so the motor was just bouncy around in a plastic bag all the way here.+ The shaft was actually a good length on this, though. No issues with the fan blades rubbing on anything.+ Once I had rewired the motor using the old connector, the motor actually seemed to work quite well.It seems to be a decent fan motor. It’s just very poorly packaged and definitely not plug and play. Be prepared to do some re-wiring and custom fitting when mounting it.

ok

So far this is working great happy the fridge is not making noise anymore.

had issue with the power connector fit, re- used the one from the old motor and this motor has been working flawlessly for a month so far. Looks well built and good to last another decade.